• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.140-144
• /
• 2003

To investigate failure analysis of surface acoustic wave (SAW) filter for radio frequency, high temperature storage test was carried out. The failure criteria were insertion loss at passband and rejection level at stopband. As a result, the insertion loss at passband increase about 4 dB was due to damages of interdigital transducer (IDT). That is caused by poor adhesion between metal electrode(AI) and piezoelectric substrate and defects on a manufacturing process. This result indicates that good adhesion between electrode and ceramic substrate is important factor And also we investigated the demage factors of electrode. Screen possible of saw filter using high temperature storage test(HTOL) in the manufacturing phase be presented.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.452-453
• /
• 2010

This paper proposes a novel diagnosis scheme using Extend Kalman Filter (EKF), especially, in subject to the open-phase faults of the inverter switches. The stator resistances of PMSM are estimated by the EKF in real time. The proposed diagnosis scheme is implemented without any extra devices. Moreover, since it uses a simple algorithm by analyzing only estimated stator resistances of each phase, the detection speed becomes fast. The feasibility of the proposed fault diagnosis scheme is proved by several simulation and experimental results.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.509-512
• /
• 2009

최근 차량용 IT 기술이 발달함에 따라 네비게이션, 위치추적, 인터넷 접수, 원격 차량 진단, 사고감지, 긴급구난, 교통정보 등을 제공하는 서비스들이 등장하고 있다. 또한 차량의 편의성과 안정성을 추구함과 동시에 친환경 등에 대한 요구도 증가하고 있다. 그리고 최근 차량 상호간 정보의 교환이 더욱 필요해짐에 따라 차량간의 무선 통신 기능이 중요해지고 있으며 차량 내의 네트워크 기술에 대한 연구도 필요하다. 현재 차량 내 네트워크로는 CAN, LIN, MOST등의 유선으로 된 버스 시스템을 중심으로 한 차량 제어 시스템과 멀티미디어 시스템으로 크게 구분할 수 있다. 그러나 자동차 내에 장치 배선이 복잡해짐에 따라 차량의 무게 증가, 고장율의 증가, 연비 저하 등으로 이어지고 있다. 이러한 문제를 보완하기 위해 차량 내에 무선 센서 네트워크 시스템과의 통합 개발이 요구되고 있다. 본 논문에서는 빠르게 발전하고 있는 차량 내 네트워크에 대한 기술개발 동향을 분석하고, 유무선 통합형 차량 내 네트워크 응용 서비스들을 제시하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.3
• /
• pp.61-68
• /
• 2012

This paper deals with a fault diagnosis algorithm for open faults in the switching devices of PWM inverter-fed IPMSM (Interior Permanent Magnet Synchronous Motor) drive. The proposed diagnostic algorithm is realized in the controller using the informations of three-phase currents or reference line-to-line voltages, without requiring additional equipments for fault detection. Under switch open fault conditions, the conventional dq model used to control an AC motor cannot directly be applied for the analysis of drive system, since three-phase balanced condition does not hold. To overcome this limitation, a fault model based on the line-to-line voltages is employed for the simulation studies. For comparative performance evaluation through the experiments, the entire control system is implemented using digital signal processor (DSP) TMS320F28335. Simulations and experimental results are presented to verify the validity of the proposed diagnosis algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.531-537
• /
• 2011

This paper proposes a finite element method (FEM)-based model of an interior permanent magnet (IPM) type BLDC motor having stator inter-turn faults. For more realistic simulation studies, the magnetic non-linearity is also considered in proposed model. And the simulation data are verified through experiment. By integrating the developed model with a current-controlled voltage source inverter (CCVSI) model, the characteristics of an inter-turn fault operated by six-switched inverter are investigated considering the speed control. And the circulating current, which is induced by magnetic linkage flux originated from PM, was analyzed from the view point of distortion of air-gap magnetic flux distribution caused deterioration of their torque.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.3
• /
• pp.568-574
• /
• 2017

This paper proposes a demagnetization fault diagnosis method for interior permanent magnet synchronous motors(IPMSMs). In particular, a demagnetization fault is one of the most frequent electrical faults in IPMSMs. This paper proposes an estimation method for permanent magnet flux. The method is based on linear interpolation. The effectiveness of the proposed method for diagnose demagnetization faults is verified through various operating conditions by finite element simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.394-401
• /
• 2017

Fault diagnosis is important due to the increasing demand of using interior permanent magnet synchronous machines (IPMSMs). In particular, an interturn fault is one of the most frequent electrical faults in IPMSMs. This paper proposes a fault indicator for diagnosis of interturn faults in IPMSMs. The fault indicator is developed by negative-sequence impedance. The effectiveness of the fault indicator to diagnose interturn faults was verified through various fault conditions.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.76-79
• /
• 2009

This paper presents analyses and performance evaluations of a PWM inverter for a permanent magnet synchronous motor drive under open fault conditions caused by the open fault in one switching device or isolation between the inverter and motor terminal. A fault model for a PWM inverter is derived and experiment is carried out by using DSP TMS320F28335 to provide the basis of fault diagnosis for such a case.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.874-875
• /
• 2007

This paper introduces major potential faults of IPMSM and their simulation realization methods. The faults of IPMSM, generally, contain single-phase open circuit, single-phase or 3-phase short circuit, and uncontrolled generation. When different fault occurs, the circuit of total system including motor and inverter also will be changed. Therefore, it is necessary to analyze and establish independent model for each kind of fault. In this paper, first, the drive circuit is analyzed as different fault type. Then, the corresponding simulation results solved in Simulink@MATLAB are given. The absence of experiment results leads that the veracity of simulation results can not be verified, but the tendency will be explained by theory analysis.

• Journal of the Korean Institute of Gas
• /
• v.6 no.1 s.17
• /
• pp.86-91
• /
• 2002

This study introduces a method that selects equipments, so as to reach the reliability level, carrying out an optimization analysis which considers the reliability data and cost of the equipments. A more practical optimization problem has been formed using the object function based on the discrete function and the constraints. The jacked reactor being the subject, an optimization analysis was performed on equipments that have different failure rates depending on costs in order to reach the target reliability level required by the system. The mixed-integer programming (MIP) was used for this optimization analysis. When the jacked reactors target level of reliability was $1.65{\times}10^{-4}$, the result of the analysis showed the equipments with high cost and low failure rate were selected. However when the target level of reliability was low, the result showed that by choosing the equipments with lower cost and reliability over the more expensive one, the desired target level could be reached.