• 전기학회논문지
• /
• 제61권3호
• /
• pp.380-383
• /
• 2012

Small permanent magnet generator can be used not only as an emergency power source but also an exciting power source of generator for small generating systems because it does not need the external exciting power source. Especially the air-gap flux density of the buried PM synchronous generator can be increased more than that of the permanent magnet. In this study, the analysis of the small buried type PM synchronous generator is performed. From the phasor diagram considering armature resistance for exact analysis, analytic equations are induced and the efficiency, developed voltage, load current are calculated. The experimental results are compared with the calculated results for the appropriateness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.719-720
• /
• 2008

This paper deals with analytical approach for rotor loss prediction of permanent magnet synchronous generator(PMSG). The rotor losses of synchronous generator are induced by the magnets. Since stator of our model is skewed, slotting effect can be negligible for our PM wind turbine generator. In order to calculate eddy current, this paper derives analytical solutions by the magnetic vector potential. Finally this paper compared analytical result with eddy current density obtained from finite element(FE) calculations using phase current harmonics analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.721-722
• /
• 2008

This paper deals with comparison and analysis for rotor losses of permanent magnet synchronous generator using phase current harmonic analysis according to dc and ac load. On the basis of analytical field analysis, the rotor losses are analysed. Particularly, rated speed and ac load and the rated speed and dc load conditions are considered. This paper compared rotor losses considered dc load with rotor losses considered ac load. Although our analytical modes is low speed, the rotor losses must be considered by results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.723-724
• /
• 2008

The rotational loss is one of the most important problems for the practical applications of PM synchronous motor/generator. This rotational loss is divided as the mechanical loss by windage and bearing and iron loss by hysteresis loop and eddy current in the part of the magnetic field. So, In this paper, a double-sided PMSM/G without the iron loss is designed by analytical method of the magnetic field and estimation of the back-EMF constant represented as the design parameter. This design model consists of the double-sided PM rotor with Halbach magnetized array and coreless 3-phase winding stator. The results show that the double-sided PMSM/G without iron loss can be applicable to the required system without the rotational loss.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.53-55
• /
• 2008

In high speed applications, the slotless permanent magnet(PM) motors appear an attractive solution, being almost insensitive to magneto-motive force harmonics and to pulse width modulation(PWM) current ripple and exhibiting lower stator iron losses and rotor losses (significant with square wave current control). So, this paper deals with methods for design of permanent magnet synchronous motor/generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1058-1059
• /
• 2015

This paper describes a low-voltage ride-through method for the permanent magnet synchronous generator (PMSG) wind turbine system at a grid fault. The generator side converter regulates the DC link voltage instead of the grid side converter by storing the surplus active power in the rotor inertia during grid fault by the sliding mode controller. The grid side converter controls the grid active power keeping a maximum power point tracking. Simulation results for small scale PMSG wind turbine verify the efficiency of the control method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.828-831
• /
• 2003

This paper presents a novel design technique and characteristic analysis of Magnet for dual air-gap axial-flux type permanent-magnet synchronous generator. The process of magnet design is applied to the motor design and steady state analysis considering output voltage waveforms and magnetic flux waveforms. Design and construction of an axial-flux permanent-magnet generator with power output at 60 [Hz], 300[r/min] is introduced. Finite-element (FE) method is applied to analyze magnet shape characteristics. The results of FE analysis show generator is feasible for use with dual air-gap axial-flux permanent- magnet synchronous generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.114-116
• /
• 2008

본 논문에서는 DC-DC 컨버터를 이용하여 조류 발전의 MPPT(Maximum Power Point Tracking) 제어를 제안하였다. 기존의 고정 듀티 제어를 이용한 발전 시스템과 가변 듀티를 이용한 발전시스템과의 비교를 통해서 가변듀티를 이용한 제어방법이 더욱 우수한 성능을 나타낸다는 것을 검증하였다. 제안한 시스템은 블레이드, 영구자석 동기전동기, 다이오드 정류기, DC-DC 컨버터로 구성되어 있으며, 고정듀티, 가변듀티 퍼지제어기를 이용한 가변듀티 방법을 이용하여 제어하였다. 본 시스템은 조류 속도의 측정 없이 컨버터의 듀티 가변으로 발전기가 최대 출력전력을 낼 수 있도록 제어하므로, 별도의 측정 장비가 필요 없다. 따라서 시스템 구성비용 적고, 복잡성이 낮으며, 효율이 높다. 알고리즘의 유효성은 Matlab Simulink를 통해서 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.57-59
• /
• 2001

This paper presents the shape optimization to minimize the BEMF(Back Electro-Motive Force) harmonics of PM type synchronous generators. RSM(Response Surface Methodology) is used to find the optimal solution. We used the 2D-Finite Element Method to obtain the observed data of the BEMF and SQP(Sequential Quadratic Problem method) is used to solve the constrained nonlinear optimization problem.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.292-294
• /
• 2008

최근 환경 파괴와 에너지 고갈에 대한 문제들이 사회의 큰 문제로 대두 되면서 풍력발전의 중요성이 증가하고 있다. 본 논문에서는 LabVIEW를 이용하여 이더넷(Ethernet) 환경에서의 풍력발전 원격감시 제어시스템을 구현하였다. 제안된 원격감시 제어시스템은 풍력발전 시스템의 MCU와 W5100의 SPI(Serial Peripheral Interface)를 통한 이더넷 통신용 하드웨어를 구축하였으며, NI사의 LabVIEW를 이용하여 서버상의 HMI(Human Machine Interface) 소프트웨어를 구현하였다. 본 연구의 실험을 위해 영구자석형 동기 발전기(PMSG:Permanent Magnet Synchronous Generator)를 이용하여 풍력발전 시스템 모델을 구현하고 이를 이용하여 원격감시 제어시스템의 성능을 검증하였다.