• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.1
• /
• pp.26-34
• /
• 2015

The angle of attack of a cambered otter board in a bottom trawl was estimated using a three-dimensional semi-analytic treatment of a towing cable (warp) system that was applied to the field experiments of a bottom trawl obtained by the Scanmar system. The equilibrium condition of the horizontal component and vertical component of forces was used to the three forces acting on the otter board in the horizontal plane. Those forces were the force on the warp at the bracket, hydrodynamic lift and drag forces on the otter board and the force on the hand rope attached just behind the otter board. Also the equilibrium of moment about the front edge of the otter board was used to find out the angle of attack of the cambered otter board. When the warp length was 120m and 180m long and the towing speed was between 1.23 and 1.90 m/s, the estimated angle of attack of the cambered otter board was ranged between $26.1^{\circ}$ and $29.6^{\circ}$, respectively, though the maximum lift force was at the angle of attack $22.6^{\circ}$. The angle of attack of the otter board was tended to increase weakly with the longer length of warp (180 m) at the same towing speed in the experiment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.387-388
• /
• 2010

An open water rudder test was carried out to figure out the flow characteristics around a twin rudder at $Re=1.5\times10^4$. In the analysis, the unique characteristics of a twin rudder, which effects rudder farces, were explained. The analysis is included varying angles of attack fram 10 to 30 degree. In this paper, the measured results has been compared with each other to predict the performance characteristics of a twin rudder's 2-dimensional section by 2-frame grey level cross correlation PIV method. The side force of the rudder could be mainly improved at 0.75L.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.71-71
• /
• 2011

캣워크는 현수교의 주케이블을 가설을 위해 일시적으로 설치하는 공중작업발판으로 주케이블 가설장비와 작업원 등의 하중을 지지한다. 캣워크는 유연한 구조물로서 풍하중에 상당한 변형이 발생한다. 하지만, 국내외를 막론하고 캣워크의 내풍안정성에 대한 연구는 별로 이루어지지 않았다. 거기에 더하여 캣워크에 작용하는 정적 공기력에 대한 정보도 부족하며, 현재 캣워크 단면에 대한 적절한 풍하중을 산정하지 못하고 경험적인 설계가 이루어지고 있다. 따라서 캣워크의 효율적인 내풍설계를 위하여 풍동실험을 통한 충실률과 공기력계수와의 관계를 알아보는 것이 필요하다. 이를 위하여 축척 1/4인 모형을 사용한 풍동실험을 통하여 메쉬망의 크기를 변화시키면서 충실률에 따른 공기력계수를 측정하고 설계식을 제안하고자 한다. 캣워크는 로프와 아울러 가는 철망으로 아래와 양 옆이 막혀 있다. 즉 바람을 직접 받는 부분인 철망은 가는 원형단면으로 구성되어 있다. 원형 단면의 경우에 레이놀즈 수에 따라 항력계수가 크게 변하는 것으로 알려져 있다. 그러나 가는 원형 단면으로 둘러싸인 캣워크의 항력계수에 레이놀즈 수가 미치는 영향에 대해서는 연구된 바가 없다. 본 연구에서는 캣워크의 공기력계수에 미치는 레이놀즈 수에 대한 영향을 파악하고자 1/4모형과 1/14모형을 제작하여 최대풍속 30m/s까지 변화시켜가면서 공기력계수를 측정하였다. 이때 레이놀즈 수는 최대 20배까지 차이가 나므로 만약 공기력계수가 레이놀즈 수의 영향을 받는다면 확실히 그 영향을 파악할 수 있다. 본 연구에서는 풍동실험을 통해 충실률과 공기력계수와의 관계과 레이놀즈 수의 영향을 살펴보았으며, 정적공기력 계수의 설계식을 제안하였다. 본 연구를 통하여 얻은 결과를 정리하면 다음과 같다. 1. 축척 1/14 및 1/4 모형을 사용하여 다양한 풍속에서 공기력계수를 측정한 결과, 캣워크에 작용하는 정적 공기력계수는 레이놀즈 수의 영향을 받지 않는 것으로 나타났다. 따라서 향후 새로운 형식의 캣워크에 대한 풍동실험을 수행할 경우에 축척에 상관없이 풍동실험 결과를 사용할 수 있을 것으로 판단된다. 2. 풍동실험 결과, 캣워크에 작용하는 정적 공기력계수 중 항력계수와 피칭모멘트계수는 측면 충실률에 따라 달라지고, 영각에 대한 양력계수의 기울기는 하부 충실률의 영향을 받는 것으로 나타났다. 그리고 주케이블이 캣워크 내부에 위치하고 있어도 캣워크의 정적 공기력계수에는 큰 영향을 미치지 않은 것으로 측정되었다. 이를 정리하여 캣워크 충실률에 따른 정적 공기력계수의 추정식을 제안하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.65-74
• /
• 1985

This study is an experimental analysis for local scour of the riverbed at pier. The basic equation with dimensionless elements(Pier Reynolds Number, Dimensionless Turbulence Intensity) is derived through dimensional analysis. After testing the goodness of fit of data, the coefficients are determined by multiple regression analysis. In the region where the value of the attack angle is near 20 degrees, there exists a transition region where the slope of equation with Pier Reynolds Number changes from positive to negative and that of equation with Dimensionless Turbulence Intensity changes from negative to positive adversely. As a result of testing the equation suggested on this study by using the data of the Institute of National Construction, it is found that the scour depth and width at pier can be predicted approximately.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.741-750
• /
• 2008

The aim of this study was to analyze the aerodynamic properties of the composite cable-stayed bridge by conducting three-dimensional wind tunnel tests. Focusing on the improved section of the bridge in the two-dimensional wind tunnel tests, the bridge's aerodynamic stability was estimated based on the angles of attack and the wind angles. The aerodynamic properties of vertical galloping, torsion galloping,and torsion flutter were also estimated based on the design wind velocity, and because much of the cable-stayed bridge was constructed using FCM, it was not sufficiently stiff during the bridge's construction. Therefore,the experience progressed by stages: from the full stage to the tow stage, and until the bridge became a single tower. Since the original plane was designed to be a steel box girder, the aerodynamic properties of the steel-box-type and composite-type girder could be compared. The results of this study can be utilized as basic data regarding the aerodynamic properties of medium-length and short composite cable-stayed bridges.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.1
• /
• pp.17-21
• /
• 1988

To the purpose of keeping net mouth of seine with bag open in the seining operation a novel method was devised and tested with model gear that double textile strips were fixed at both side edges of bag net mouth as sheering devices. The angles of attack of inner and outer strips were the 40 in degrees by adjusting rigging. In seining operation current that flowed between the double strips and generated side force on the strips sheered and opened the net mouth automatically. This paper described dynamic characteristics of the sheering strips and its automatic opening function of net mouth.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.21-32
• /
• 1992

Numerical solutions are presented for solving the free surface flow created by a three-dimensional body moving beneath the free surface with constant velocity at an angle of attack. The solution is obtained using a panel method based on the perturbation potential, which employs Havelock sources and normal dipoles distributed on the body surface and Havelock normal dipoles in the wake downstream of the trailing edge. A pressure Kutta condition with an iterative solution procedure is implemented to satisfy equal pressure condition on the upper and lower surfaces at the trailing edge. Numerical calculation examples in the present paper include an ellipsoid at zero angle of attack, a rectangular planform wing at a small angle of attack in the limit of zero Froude number and then free surface flows and hydrodynamic forces acting on the submerged spheroid and parabolic strut are calculated. Discussions are made about the validity of the present method.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.98-103
• /
• 1992

The dynamic and static torque characteristics of a three dimensional control panel installed behind a guide panel were investigated in a wind tunnel. The panel was tested for various wind speeds, angles of attack and positions of the panel. The effects of the rotational speed and the amplitude of the sinusoidal motion were also studied. The increasing rate of torque coefficients with the angular position of the panel is small when the panel remains in the wake region, but is linear when it reaches the external stream. In case of a sinusoidal motion of the pannel, a hysterisis appears in the dynamic torque. The hysterisis becomes strong as the wind speed and the angular speed of the panel increase. The unsteady torque is considered quasi-steady when the angular speed is less than 5.5rad/s, i.e. the reduced frequency is less than 0.035.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.1
• /
• pp.62-73
• /
• 2019

Recently, copper alloy netting has been proposed as a material for aquaculture facilities that can be set in harsh offshore environments. To design a cage made of copper alloy netting, it is necessary to calculate the flow of water through the netting and force of external sources on the netting. Therefore, this study measured and analyzed the current velocity reduction after passing through the netting and the hydrodynamic forces acting on the netting using copper alloy netting with nine solidity ratios. As a result of the reduction rate of the flow velocity through the netting, the flow reduction rate was increased as the solidity ratio of netting was increased. The flow reduction rate was also increased as the attack angle on the netting was decreased. In analyzing the resistance on the netting, we also discovered that resistance was increased with increase in the flow velocity and solidity ratio. An analysis of the hydrodynamic coefficient acting on the netting is shown that the drag coefficient tends to increase as the attack angle increases. We also analyzed the hydrodynamic coefficient according to the variation of the Reynolds number. When the drag coefficients acting on the netting were analyzed with the different Reynolds numbers, the Reynolds number increased from over 0.3 m/s to a relative constant. Finally, the copper alloy nettings had a smaller velocity reduction rate when comparing the flow velocity reduction rate between copper alloy nettings and nylon nettings.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.265-277
• /
• 2019

Using the measured data of waves and shore-line, we reviewed the grand circulation process and seasonal variation of beach cusp at the Mang-Bang beach from the perspective of trapped mode Edge waves known as the driving mechanism of beach cusp. In order to track the temporal and spatial variation trends of beach cusp, we quantify the beach cusp in terms of its wave length and amplitude detected by threshold crossing method. In doing so, we also utilize the spectral analysis method and its associated spectral mean sand wave number. From repeated period of convergence and ensuing splitting of sand waves detected from the yearly time series of spectral mean sand wave number of beach cusp, it is shown that the grand circulation process of beach cusp at Mang-Bang beach are occurring twice from 2017. 4. 26 to 2018. 4. 20. For the case of beach area, it increased by $14,142m^2$ during this period, and the shore-line advanced by 18 m at the northen and southern parts of the Mang-Bang beach whereas the shore-line advanced by 2.4 m at the central parts of Mang-Bang beach. It is also worthy of note that the beach area rapidly increased by $30,345m^2$ from 2017.11.26. to 2017.12.22. which can be attributed to the nature of coming waves. During this period, mild swells of long period were prevailing, and their angle of attack were next to zero. These characteristics of waves imply that the main transport mode of sediment would be the cross-shore. Considering the facts that self-healing capacity of natural beaches is realized via the cross-shore sediment once temporarily eroded. it can be easily deduced that the sediment carried by the boundary layer streaming toward the shore under mild swells which normally incident toward the Mang-Bang beach makes the beach area rapidly increase from 2017.11.26. to 2017.12.22.