• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.234-240
• /
• 2009

In this study, we found that it is important to have a specific management of standards which are the $12{\pm}3{\mu}m$ of plating thickness and $2{\pm}1%$ of tuning. To verify these standards, we checked the plating thickness and density of tuning through marginal valuation of each and checked size of a plating particle, adhesion of solder and condition of reflow after a section chief.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.541-549
• /
• 1994

The crystallization behavior and structural change of amorphous $PbTiO_{3}$ precursors prepared by coprecipitation method were investigated by XRD, Raman spectra, TEM, and RDF. The precursors were prepared at $45^{\circ}C$ and pH of 9 from a mixed solution of lead nitrate and titanium tetrachloride derived using $H_2O_2$ or $NH_4NO_3$ as an ion stabilizer. The activation energy and temperature for crystallization of the coprecipitate prepared using $NH_4NO_3$ as an ion stabilizer were lower than that derived from the solution containing $H_2O_2$ stabilizer. The amorphous coprecipitate transformed to transient phase and then to crystalline $PbTiO_{3}$. Average interatomic distances of amorphous states decreased with increasing heat-treatment temperature.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.1-8
• /
• 1992

The morphology of lead titanate powders prepared by sol-gel and coprecipitation techniques was investigated as a function of firing temperature and soaking time. PbTiO3 precursor powders were derived from a mixed solution of lead nitrate and titanium tetrachloride at 40℃ to 43℃ and pH of 9.0 to 9.7, and fired at temperatures 350-1000℃ for 1-10h in air. An increase of particle size and agglomeration with increasing calcination temperature and duration could be observed. By annealing sol-gel derived powder at 700℃, the tially-formed acicular(and/or prismatic) primary particles transformed to polyhedral shape with soaking time, and further soaking caused coarsening the polyhedral particles with rounded edges. However, the morphology of the coprecipitated powders was not varied during crystallization.

• Journal of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.428-433
• /
• 1975

500 ml of a sample water was extracted with 10 ml of 0.01 % dithizone-$CHCl_3$three times. When $CHCl_3$ layer was back extracted with 10 ml of 0.1 N HCl containing mercuric ion, the free metal ions come into aqueous layer. The aqueous layer was added with 2 ml of 2 N KCl and was washed with 10 ㎖ of $CHCl_3$two times in order to remove the trace dithizone, and then was recorded square wave polarogram. The concentration of copper, lead and cadmium can be determined up to 3 ppb and that of zinc up to 14 ppb with an error of 10 %.

• 월간 기계설비
• /
• s.240
• /
• pp.48-49
• /
• 2010

지식경제부 기술표준원이 수도관, 오 배수관, 토목용 하수관으로 광범위하게 사용되는 PVC(폴리염화비닐)관의 품질과 위생기준을 강화해 지난 해 7월 1일부터 납 안정제와 가소제 등의 사용을 금지하고, 위생성 및 장기내구성 등의 품질기준이 강화된 흰색 PVC관을 상 하수도관으로 사용토록 했으나 아직도 이를 제조하거나 시공하고 있어 주의를 촉구하고 나섰다. 이에 따라 PVC관을 수도관, 오 배수관으로 시공하고 있는 설비건설업계의 주의가 요망된다.

• Journal of the Korean institute of surface engineering
• /
• v.19 no.2
• /
• pp.44-50
• /
• 1986

Effects of cathodic overvoltages on the electrodeposition of lead from electrolyte containing lead chloride, ammonium acetate and sodium succinate was investigated at 20$^{\circ}C$. The use of organic additives, phenol and gelatin was found effective to inhibit the growth of dendritic crystals. At the carthodic overvoltages higher than 0.2V, the lead deposit becames less compact even in the presence of organic additives. The applications of agitation and pulse current promoted compact and shiny deposits.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.48-48
• /
• 2018

습도는 대기중에 분포되어있는 물 분자의 양으로 사람이 살아가는데 있어 막대한 영향을 주는 환경적 요소중 하나이다. 산업적 가스의 순도에 막대한 영향을 끼치기도 하고, 반도체 산업에서 불량률과도 밀접한 관련이 있다. 또한, 식품학이나 기상학, 농사와도 밀접한 관련이 있어서 습도를 측정하는 것은 중요시 되고 있다. 이를 위해서 많은 물질들이 사용되고, 연구되었다. 산화 구리, 산화 아연, 산화 납 등의 산화금속 물질들이나 전도성 고분자, 실리콘 기반의 물질들이 주로 사용되고 있는데, 그 중 산화 금속이 쉬운 합성 방법과 낮은 단가, 명확한 작동 원리로 인해 널리 사용되고 있다. 산화 아연의 경우 넓은 direct band gap energy와 우수한 내화학성으로 인해 주로 사용되는데 그 중 1차원 물질인 nanowire의 경우 비등성 구조와 높은 비표면적을 갖는 특성으로 인해 산화 아연의 nanowire 구조가 많이 사용된다. 본 연구에서는 열처리 공정을 이용하여 산화아연의 nanowire 구조를 합성하였고, 합성된 nanowire는 양쪽의 미세전극을 직접적으로 연결하여 간편한 방식으로 소형 소자를 만들 수 있다는 장점이 있다. 열처리 공정 이전에 전기도금 방식을 이용하여 아연층을 증착 하였다. 전기도금 조건은 0.1 M의 염화 아연과 1 M의 염화 칼륨으로 구성된 용액에 -1.1 V를 인가하였다. 합성된 아연층은 열처리 공정에 의해 산화아연의 nanowire 구조체로 변환되고, SEM (scanning electron microscope)를 통해 표면 형상을 관찰 하였고, XRD (X-ray diffraction)을 통해 미세구조를 확인하였다. -1 V부터 1 V 범위의 전압을 흘려주어 형성된 소자의 전기적 특성을 확인하였고, 1 V를 인가하였을 때, 습도 변화에 따른 센서 소자의 저항변화를 통해 습도 센서로서의 특성을 확인 하였다.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.66-76
• /
• 2021

Electric arc furnace dust (EAFD) contains compounds, such as oxides and chlorides, including large quantities of Zn, Pb and Fe. An efficient and stable method for the extraction of metal elements from EAFD is the Rotary Kiln Process. This method is used to recover Zn in the form of crude ZnO (approximately 60%) via the addition of a reducing agent (coke, anthracite) and limestone (for basicity control) to EAFD. This process is commonly used in industry as well as in research and development. Currently, this method is used in many Korean commercial plants, producing approximately 150,000 tons of Crude ZnO per year. The majority of Zn is found in crude ZnO (approximately 76%). In addition components such as Pb, Cd, Sn, In, Fe, Cl, and F are present as oxides, chlorides, and alkaline compounds. This elements have an adverse effect on the zinc smelting process. Therefore, a refining process that eliminates these impurities is essential. In this study, we developed a process technology that efficiently separates Zn and Pb from byproducts (mainly chlorides). A bag filter was used to collect Zn and Pb generated during the dry purification process of crude ZnO. Pure components were recovered as metals or metal carbonate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.169-175
• /
• 1976

A solvent extraction-atomic absorption spectrophotometry for determination of trace amount of cadmium, copper, lead and zinc and a flameless atomic absorption spectrophotometry for mercury in sea water were studied. The optimum pH range for solvent extraction was pH 4-7. A better solvent extraction efficiency was obtained with MIBK solvent than nitrobenzene, benzene, isoamylalcohol, n-buthylacetate. DDTC was more advantageous than APDC as chelating agent. The metals, chelated with DDTC and concentrated into MIBK by solvent extraction with a volume of $1\iota$ of sea water for cadmium, copper and lead, and 200m1 for zinc, were determined simultaneously by atomic absorption spectrophotometry. For mercury determination, 500ml of sea water was digested with permanganate-sulfuric acid and mercury( II ) was reduced by stannous chloride and aerated the solution with air pump until the absorbance reached a constant value. The precisions, in standard deviation, of these methods were 0.058ppb for cadmium, 0.084 ppb for copper, 0.44ppb for lead, 2.49ppb for zinc and 0.08 ppb for mercury. The sensitivities, expressed in $ppb/1\%$ absorption, were 0.058 ppb cadmium, 0. 15 ppb copper, 0.6 ppb lead, 1.2 ppb zinc and 0.01 ppb mercury respectively. No significant adsorption on the wall of polyethylene sample bottle occurred during 30 days of storing by acidification to pH 1.5 with nitric acid except zinc. Poor reproducibility was found for zinc with this method.

• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.133-146
• /
• 1996

Morphology and infrared absorbing characteristics of Pt-black prepared by electroplating have been investigated with XRD, SEM, and IR spectrophotometer. The Pt later was coated on Au-coated alumina/glass substrates for 1-5 min at pH 1.0-1.5, where a solution of platinum chloride and lead acetate was used as the electrolyte. At the electrical current density of 20-50 mA/㎠, the Pt-black showed a dendritic growth which was characterized by a "tree" shape. Absorptivity of above 90% at IR radiation of 10 m was observed for the Pt absorbing layer with an area density of ≥1.3mg/㎠.