• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.301-309
• /
• 2003

Of the various types of dye that can be used to apply polyamide fibers, acid dyes and pre-metallised acid dyes are great in use so far. However, since these acid dyeings suffer from dye loss during laundering, recourse to an aftertreatment is usually necessary to achieve adequate fastness to washing. In the case of reactive dyes, the characteristically high washfastness of dyeings comes with the concomitant advantages of brightness and low environmental impact. Despite the obvious advantages, the commercialization of reactive dyes for polyamide fibers has not gained widespread success. In this context, the rewards for approach are likely to be considerable. Heterobifunctional reactive dyes were applied to polyamide fibers using various conditions. Optimum conditions and fixation were determined. The forms in which the vinylsulphone and hydrolyzed moieties were examined using HPLC-Mass. In addition, it was found that the extent of the washfastness secured, in terms of both change in color and staining of adjacent multifiber was being acceptable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.268-274
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on silk fabric were investigated. Pomegranate colorants were characterized by FT-IR analysis. Effects of dyeing condition and mordanting on dye uptake, color change and colorfastness were explored. Pomegranate colorants showed high affinity to silk fiber and its isotherm adsorption curve was Langmuir type. Therefore, ionic bond was involved in the adsorption of pomegranate colorants on to silk fiber. Mordants except Fe did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on silk fabric, but the silk mordanted with Fe showed yellow red color. Fastness to washing, perspiration, and rubbing was not improved by mordanting treatment, but light colorfastness was increased by Fe mordant.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.46-52
• /
• 2009

Dyeing properties of hydrophobic polypropylene fibers using cationic dyes were investigated to improve dyeability by electron beam irradiation and sulfonic acid incorporation. The color strength of irradiated polypropylene fibers was examined according to the dyeing conditions including pH of dyebath, absorbed doses, and introduction of functional group to fiber substrate. The best dyeing result was obtained when sulfonic acid group incorporated polypropylene fibers after electron beam irradiation were dyed with cationic dyes at alkaline conditions and 30$\sim$75kGy irradiation ranges.

• Journal of Fashion Business
• /
• v.15 no.4
• /
• pp.182-189
• /
• 2011

Dyeing properties of cow leather was investigated with Tumeric powder. The effects of dyeing conditions, mordanting conditions, color change, and color fastnesses were studied. The results were as follows. The dye uptake increased as dye concentration, dyeing temperature, and bath ratio increased. In the effect of dyeing time, the highest dye uptakes showed at 20 minutes and decreased after that point. Pre mordanting was more effective than the post mordanting, and the dye uptakes improved all mordanted fabrics. The highest K/S values showed in pre-Al sample, and the lowest K/S values showed in post-Cu one. The values of Hunter on the samples were more changeable $L^*$ and $b^*$ than $a^*$, and all samples showed Yellow color in Munsell value. But the mordanting methods and mordanting agents were not significant in the color changes. The light fastness of dyed samples showed 1 grade, the dry cleaning and abrasion fastnesses did not improved except post-Fe wet sample.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.3-12
• /
• 2001

The dyeing powder drawn out from Dryopteris crassirhizoma by water was concentrated. Using this powder, the silk and the cotton fabrics were dyed and they measured with the K/S value, surface color, mordant quantity in order to evaluate the dyeability, antimicrobial and deodorant properties. The colorant of Dryopteris crassirhizoma was proved flavonoids by FT-IR spectrum. The K/S values of silk were much higher than those of cotton, the color yield of the silk and cotton fabric were most efficient the postmordanting method. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark. The chroma produced clear for the Al-mordant of silk and the Cu-mordant of cotton in the 3% concentration of mordants, the color difference was distinct when using the Fe-mordant. The K/S values of cationized cotton were much higher than cotton. The color fastness was significantly improved when mordants were added, In the case of the light fastness, Fe and Cu-mordants improved more than 1 level. The Cu-mordant showed the greatest antimicrobial and deordarant activity on both of the silk and the cotton.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.414-420
• /
• 2009

We dyed traditional Korean hand-made papers (Hanji) with colorants extracted from fruits of Alnus japonica to investigate the effect of various dyeing factors (mordant, dye concentration and dyeing assistant) on colors, K/S values and light fastness of the dyed Hanji. The dyed hanji had brown color. The K/S value of dyed Hanji was increased by mordanting with alum and copper acetate. $a^*$ and $b^*$ value of dyed Hanji was decreased slightly by mordanting with alum and Iron(II) chloride. The K/S value and $b^*$ of dyed Hanji increased with increasing concentration of dye, but $L^*$ value of dyed Hanji decreased. The K/S value of dyed Hanji was also increased by fixing agent. When Hanji was mordanted with Iron(II) chloride and was not mordanted, use of fixing agent resulted in greater increase of K/S value. Use of fixing agent resulted in poor light fastness. When fixing agent was used, mordanting with copper acetate resulted in smaller color difference than mordanting with alum after aging test.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.45-45
• /
• 2011

최근 환경과 건강에 대한 관심이 증대되면서, 복합기능을 갖는 다기능성 섬유에 대한 요구가 증대되고 있는 실정이다. 일반적으로 기능성은 마이크로캡슐이나 후가공제를 이용하여 일반 섬유 제품에 적용하고 있다. 마이크로캡슐이나 후가공제가 적용된 일반 섬유제품은 일상생활 속에서의 마찰 및 세탁 등으로 인해 기능 저하가 발생된다. 이러한 문제점을 개선하기 위해 특수 방사 기술을 이용하여 다기능성을 갖는 섬유 제조 기술이 개발되고 있다. 다기능성 섬유소재 및 응용제품은 그 제조 공정성이 우수하고, 염색 가공 등의 후 공정 조건에 의해 기능성 저하를 초래하지 않고, 지속시간이 오래 유지해야하는 조건을 만족해야한다. 이러한 기능성 저하 문제를 해결하고 내구성 향상 및 기능성의 지속 시간을 오래 유지하기 위하여 복합 방사 기술을 이용하여 이형 단면 원사, Sheath-Core 단면 원사 등이 개발되고 있다. 개발된 기능성 원사의 경우 일반 원사와 다른 형태의 염색성을 보일 수 있으며, 염색 온도 및 염색 시간 등 염색 조건이 달라질 수 있다. 본 연구에서는 식물 등에서 추출한 천연 항균 유기물을 마이크로캡슐화하여 이형단면의 심부에 담지된 형태인 Sheath(Nylon: 50%)-Core(PP MB: 50%) 원사의 염색성 평가 시험을 실시하였다. 시험 방법은 Sheath-Core 원사와 일반 Nylon 원사와 염착 거동 시험을 통해 비교해 나타냈고, 염색 전 후의 물성을 비교해보았다. 또한 염색성 평가 시험을 토대로 기능성 원사의 염색 온도와 시간에 따른 색차 비교 시험을 통해 기능성 원사의 염색 조건을 선정하는 시험을 실시하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.45-45
• /
• 2012

초고분자량 폴리에틸렌(UHMWPE)섬유는 현재까지 알려져 있는 섬유중 비강도가 가장 우수하며 강도 또한 최고 40g/d를 나타내는 슈퍼섬유중에 하나이다. UHMWPE섬유는 비교적 간단한 분자구조로 이루어져 있으며 높은 결정화도로 인해 광 안정성 및 자외선 저항성이 우수하며 내마모성도 뛰어나다. 이러한 특성으로 인해 최근 로프 및 어망 등의 산업적 용도 뿐만 아니라 익스트림 스포츠웨어를 포함한 의류소재에도 다양하게 적용되고 있다. 하지만 의류소재 적용에 앞서 초소수성으로 이루어진 분자구조와 낮은 내열성으로 인해 염색이 쉽지 않으며 다양한 색상을 구현하기가 힘든 실정이다. 현재 본 연구실에서는 이와 같은 문제점을 해결하기 위해 UHMWPE섬유에 염색이 가능한 염료를 개발하였으며 보다 다양한 색상을 구현하기 위해 연구를 진행 중이다. 현재 본 연구실에서는 UHMWPE섬유 염색에 있어 Blue, Red, Yellow, Magenta 계열의 색상구현이 가능하며 보다 심색화 된 색상을 구현함으로 인해 의류용 섬유소재 및 산업용 섬유소재에 다양하게 적용할 수 있도록 UHMWPE섬유용 염료합성 실험이 진행되고 있다. 안트라퀴논 및 아조계 염료에 초소수성 알킬체인을 치환함으로써 염료의 소수성을 증가시켜 초소수성 섬유인 UHMWPE섬유에 염착성을 증가시키고 높은 견뢰도 결과를 확보하였다. 또한 내열성이 낮은 특성에도 불구하고 염색 이후 UHMWPE섬유가 가지는 물성에는 큰 변화를 나타내지 않았다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.41-41
• /
• 2012

고급 스포츠웨어와 이너웨어 등에 많이 사용되고 있는 나일론/폴리우레탄 혼방제품은 염색에 있어서 Grin-through 현상, 인공피혁의 염료 이염 현상 등 많은 문제들이 존재한다. 본 연구의 나일론과 폴리우레탄 복합소재에서 나타나는 염색거동을 고찰하고 분석하여, 폴리우레탄 복합소재의 염색성을 개선하기 위하여 실시하였다. 폴리우레탄 복합소재는 해성분이 용출되지 않은 나일론 초극세사 소재에 폴리우레탄 수지를 함침하여 인공피혁과 같은 느낌을 주도록 직접 제조하였다. 제조된 폴리우레탄 함침 나일론 초극세사 소재의 해성분을 용출하였고, Red 색상의 밀링형 산성 염료, 함금속 염료와 반응성 염료에 따라 달라지는 염색특성 및 세탁 견뢰도 등을 고찰하였다. 본 연구를 통하여 다음과 같은 실험결과를 얻을 수 있었다. 나일론 초극세사와 폴리우레탄 수지를 준비하여 습식공정을 통해 인공피혁을 제조한 함침 소재를 알칼리 감량하였고, 감량률은 15~17% 정도로서 대부분의 해성분이 용출됨을 확인하였다. PPG와 PTMG로 구성된 폴리올을 기반으로 한 폴리우레탄 함침 피혁과 PTMG를 단독으로 사용한 함침 피혁의 염색성을 비교한 결과, PPG+PTMG 타입이 더 우수한 염색성을 나타내었다. 특히 밀링 타입과 함금속 타입 염료의 경우는 거의 2배 이상의 흡진율과 겉보기 색농도를 나타내었다. 한편, 반응성 염료의 경우는 두 종류의 폴리우레탄 필름에 거의 염착되지 않았기 때문에 앞으로의 염색실험에서 제외하였다. 견뢰도 측면에서는 각각의 피염물의 등급은 거의 유사하게 나타남을 확인하였다. 이상과 같은 결과로부터, 인공피혁 제조시 PPG+PTMG 타입의 폴리우레탄 수지를 사용하여 함침시 더 높은 색강도와 염착률을 얻을 수 있음을 알았다. 사용하는 염료의 종류를 좀 더 다양하게 하여 실험을 실시하고 폴리우레탄의 물성 및 분석 등의 추가적인 연구가 진행된다면, 인공피혁의 염색시에 발생하는 여러 가지 문제점들을 해결할 수 있을 것이다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.577-585
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on cotton fabric were investigated. Effects of dyeing conditions and mordanting on dye uptake, color change and colorfastness were explored. Cationic agent treatment was done for cotton to improve low dyeability in natural dyeing. In addition antimicrobial activity of the cotton fabrics dyed with pomegranate colorants was examined by the shake flask method. Pomegranate colorants showed low affinity to cotton fiber and its adsorption isotherm was Freundlich type. Therefore, hydrogen bonding was involved in the adsorption of pomegranate colorants onto cotton fiber. Mordants did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on cotton fabric. In order to improve dye uptake, cotton was cationized by treating with Cationon UK(quarterly ammonium salt) and chitosan. The cationized cotton with Cationon UK showed higher dye uptake and shorter dyeing time, compared with the untreated cotton. Chitosan treated cotton also showed high dye uptake, but chitosan was less effective compared with Cationon UK. Fastness to washing, perspiration, and rubbing was not improved by mordanting and cationizing treatment, but light fastness was increased by all mordants and cationic agent. As dye concentration increased, bacterial reduction rate was increased and mordants did not significantly increase bacterial reduction rate.