• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.329-334
• /
• 1998

난연성을 지닌 고분자 물질중 Chlorosulfonated Polyethylene(CSPE; Hypalon)은 Polyethylene에 염소와 황을 첨가한 것으로 염소를 첨가함으로써 기름과 화염에 대한 저항성을 향상시키고, 황 또한 기름, 화염에 대한 저항을 향상시킬 뿐 아니라 인장강도를 크게 해서 기계적 강도를 향상시킨 것이다. CSPE는 염소량의 등급에 따라 Coating재료, 호스 구조재, Wire와 Cable의 피복재료등 여러 가지 용도로 많이 쓰이고 있으며 특히 염소함량이 35%인 CSPE(Hypalon-40)의 경우 열저항과 압출 특성이 우수하기 때문에 Cable의 피복재료로 많이 쓰이고 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.143-151
• /
• 2024

This study was analyzed the relationship between concrete slump, compressive strength and other factors such as the quantity of chloride or others using statistics method. The amount of chloride in cement was selected to range from 236 to 794 ppm, and cement that satisfied the KS L 5201 standard for other physical properties was used for this experiment. As a result, no factors had a interrelationship for initial slump and the strong-negative correlation between concrete slump elapsed time and the quantity of chloride. The proportion of chloride was shown as a strong-positive correlation for compressive strength from 1-day to 7-day curing. However, there was no correlation between chloride and compressive strength at 28-day curing.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.195-201
• /
• 1999

The repassivation characteristics of Fe-Cr steels in deaerated 0.1 M $Na_2SO_4$ solution have been investigated with the variation of Cr content, applied potential and Cl- concentration. In the absence of chloride ion, abrading electrode test showed that, slope -n, of log i=k -n log t, a parameter of repassivation rate, approached to -1, regardless of Cr content but as Cr content increased, repassivation current density decreases with increasing Cr content. A.C. Impedance spectroscopy showed that the charge transfer resistance of passive film became higher as Cr content and applied potential increased. However, in the presence of chloride ion, it was observed that chloride ion suppressed the passive film formation, whose effect became greater with increasing applied potential.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.206.2-206.2
• /
• 2010

현재 RPF 생산공정에서 생산된 RPF는 약 7,500~8,500kcal/kg 의 높은 열량을 지니고 있다. 이러한 특성으로 연소시 소각로 내부의 온도가 부분적으로 급격히 상승하여 적정온도조절이 어렵고, 로내 장치들의 내구성이 저하되는 등 문제가 발생하고 있다. 또한, RPF에 포함된 비교적 높은 농도의 염소 함량(0.8~1.8% wt)으로 인해 다량의 대기오염물질이 발생되는 단점이 나타나고 있다. 따라서, 이러한 문제점들을 개선하기 위해 RPF의 개질이 필요하며 본 연구에서는 슬러지와 RPF를 혼합하여 열량, 성형성, 염소함량등을 고려하여 최적의 혼합비율을 선정하였다. J하수처리장에서 발생하는 하수슬러지를 이용하여 5, 15, 25, 30, 35%를 RPF 성형공정에 혼합하여 실험하였다. 5% 혼합시 발열량은 약 6,300~6,800kcal/kg, 염소농도는 0.8~1.6%(wt), 15% 혼합시 발열량은 5,500~6,000kcal/kg, 염소농도는 0.7~1.4%(wt), 25% 혼합시 발열량은 5,200~5,900kcal/kg, 염소농도는 0.6~1.1%(wt), 30% 혼합시 발열량은 5,000~5,700kcal/kg, 염소농도는 0.6~1.0%(wt), 35% 혼합시 발열량은 4,800~5,200kcal/kg, 염소농도는 0.4~0.6%(wt)으로 나타났다. 각 혼합비율에서 관찰된 성형성은 5~25% 혼합까지는 성형된 RPF와 유사하게 일정한 크기 및 강도를 유지 할 수 있었으나, 25% 이상 혼합시 분말형태의 가루가 많이 발생되며 강도가 약해져 쉽게 부스러지는 문제점등이 나타났다. 연료의 개질 형태나 성형성등을 고려하였을 때 슬러지 혼합비율이 약 15~25% 정도가 최적 혼합비율인 것으로 나타났다.

• Cement Symposium
• /
• no.29
• /
• pp.145-150
• /
• 2002

• The Korean Journal of Zoology
• /
• v.3 no.1
• /
• pp.24-30
• /
• 1960

본실험의 목적은 탄산기에 방사성동위원소 C14를 표식한 sodium acetate ($CH_3$C14 OONA)를 사용하여 염소의 위내에 존재하는 acetate 의 위벽으로부터의 흡수율과 위의 acetate의 평균함량을 측정하는데 있다. C14 로 표식된 sodium acetate(specific activity 1.35$\times$108 cpm./g.)를 급사 3 시간후의 염소의 위내에 주입하고 주입 2분후부터 약 2분간격으로 위 내용물을 추울하여 column chromatograpy를 이용하여 acetate를 분리정량한 후 그의 specific activity를 측정하였다. 주입후 3 분경까지는 위내에 존재하는 acetate에 의한 표식 acetate의 희석으로 말미암아 specific activity 는 급격히 감소되어 갔고 3 분후부터는 감소도가 비교적 완만하였으나 역시 계속적으로 감소되어갔다. 희석완료후의 이 specific activity 감소는 위벽을 통한 acetate를 흡수와 위 내용물로부터의 acetate 생성으로 인한 것으로서, 이 감소율로부터 acetate의 위벽흡수속도를 추정할 수 있다. 상기 specific activity의 감소 graph 로부터 추정된 위내 acetate의 량은 본실험의 제조건하에서 약 30 g이었으며 위내 acetate 의 specific activity가 1/2 로 감소되는데 요하는 평균 시간은 약 4 분이었다. 이는 위내에 존재하는 acetate량의 약 절반은 4 분동안에 위벽을 통과함을 의미한다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.1072-1078
• /
• 2015

To maintain high quality and microbiological safety of paprika during storage for export, paprika samples after harvest were treated with 75 ppmv chlorine dioxide ($ClO_2$) gas and stored at $8^{\circ}C$, which is the optimal storage temperature, for 30 days. $ClO_2$ gas treatment reduced initial populations of total aerobic bacteria in samples by 1.62 log CFU/g as well as yeast and molds by 1.45 log CFU/g compared to those of the control. During storage, weight loss of all samples increased, and samples treated with $ClO_2$ gas showed lower weight loss than the control. In addition, total soluble solid and total phenolic contents were not significantly different between the samples during storage, whereas vitamin C content and hardness of all samples decreased. Hunter L, a, and b values of paprika samples were not significantly different between the treatments. These results suggest that $ClO_2$ gas treatment can be effective for improving microbiological safety and maintaining high quality of paprika during storage.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.53-60
• /
• 2022

The physical properties of chlorine-containing cement were analyzed to optimize the operational conditions when waste resources containing chlorine were used in the cement manufacturing process. Cement with clinker to gypsum weight ratios of 95:5 and 93:7 were manufactured. In addition, the iron modulus (IM) of clinker was set to 1.3, 1.5, and 1.7 to evaluate the burnability and physical properties of clinker. With constant chlorine content, increasing gypsum content resulted in a decrease in the 3 day-compressive strength, whereas the 28 day-compressive strength increased. In addition, flow and setting time also increased with increasing gypsum content. As the IM decreased, burnability was improved, free-CaO content decreased, alite and ferrite content increased, and compressive strength increased In particular, the compressive strength of IM 1.3 was approximately 14% greater than that of IM 1.7.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.3
• /
• pp.184-189
• /
• 1993

Orchardgrass(Dactylis glomerata L.) hays, which had been harvested in different seasons and grown with different levels of potassium (K)fertilizer, were fed to foats in metabolic cages in order to know the effect forage mineral content on mineral balance of goats. The K contents of the feed were 3.4, 4.9 and 5.8% and magnesium (Mg) contents were 0.26, 0.21 and 0.21% on a det matter(DM) basis in K-low, K0medium and K-high treatments, respectively. Urinary K excretion was significantly more on K-high than on K-low treatment. Faecal and urinary Mg excrerions on K-low were higher than those on K-medium and K-high feeds. And there was a tendency of positive relation between urinary Mg excretion and serum Mg concentrarion. Goats on K-high treatment seemed to drink more water and excrete more urine than those on the other feeds.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.553-556
• /
• 2013

Chlorine dioxide gas has an excellent ability for sterilization and deodorization, and is harmless to humans. However, it is very unstable and explosive as it is highly concentrated, thus its use in the air clean fields has been limited. Therefore, there is need to control chlorine dioxide gas at a low concentration for a long time. Chlorine dioxide gas could be produced slowly and sustainedly since the release of acetic acid from the polymer hydrogels delayed the reaction between acetic acid and sodium chlorite. In addition, as the amount of both acetic acid sodium chlorite loaded within the hydrogel and on the membrane increased, respectively, the generation amount of chlorine dioxide gas increased. The result shows that the use of polymer hydrogels has the potential to control the generation of chlorine dioxide gas.