• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.2
• /
• pp.136-143
• /
• 2013

In the sewage structures and wastewater facilities, concrete is exposed to hydrogen sulfide ($H_2S$) which acts as an acid material in a solution, and a strongly acidic sulfate ion ($SO{_4}^{-2}$) is generated by a sulfuric bacteria. Hence, a degradation of concrete with biochemical corrosion would be accelerated. Finally, durability of concrete and concrete structures may be greatly reduced. In this study, in order to remove the hydrogen sulfide which is used by the sulfuric bacteria organic-biologically, the antibiotic metal and metallic salt powders were mixed to concrete, and a suppressing performance of the sulfate ion was assessed. For the sulfuric acid bacteria, a comparative evaluation of antimicrobial performance on neutralized concrete specimens were carried out, also by a rapid chloride penetration test, chloride penetration depths and diffusion coefficients were measured for antibiotic concrete in accordance with the amount of metal and metallic salt-based antibacterial agents. Eventually, by an observation of the biochemical state of the surface of concrete specimens exposed outdoors, the performance and applicability of antibiotic concrete were confirmed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.4
• /
• pp.333-337
• /
• 2014

The purpose of this study is to develop a process technology to produce high hardness concentrated seawater removing chloride ions but containing useful minerals such as magnesium and calcium in the seawater desalination process. In order to make high hardness concentrated seawater, evaporation system is mostly used recently. Because evaporation system requires a large amount of energy consumption, in this study, it was aimed to produce high hardness concentrated seawater using membrane filtration requiring less energy. Nano filtration membranes were used for the experiments, and different types of high hardness concentrated seawater was produced depending on the membranes' specification, the number of times being concentrated, and pressure. As a result, at between 15bar and 20 bar in pressure, in between the second and the third times of concentration, the experiment result showed the best economic efficiency. By the experiment, production of high hardness concentrated seawater seemed to have a good economic feasibility.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.24-32
• /
• 2010

In the present work, a new separation system with rotating rakes has been developed to separate the film-based plastics from the recyclable materials, and environment assessment is also carried out during operation of the device. Capacity of the device was about 5.3 ton/hr at a rakes rotation speed of 26.0 rpm (the number of rakes in the 1st, 2nd and 3rd trials were 39, 52 and 48, respectively) and a belt conveyor speed of 38.5m/min, which satisfied the initial design capacity (5.0 ton/hr). Recovery ratio and purity of the plastic films were 92.6% and 96.5%, respectively at a rotation speed of 28 rpm. The levels of noise, vibration and particulate emission were below material standard regulatory limits. Plastic refused fuel (RPF) was also prepared with the recovered films. The calorific value and chlorine content of the prepared RPF were 9,740 kcal/kg and 0.18%, respectively which satisfy the first grade quality specification of the Korean RPF standard. As a result of this work, recovery of energy resources from the municipal solid waste is possible by adopting the developed separation device.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.272-281
• /
• 1995

The residual Polychlorinated biphenyls(PCBs) in the sediment of the Kumho River basin were measured because the Nakdong River was considered to be affected by the environmental quality of Kumho River. PCBs in the sediment were chlorinated and converted into Decachlorinated biphenyl(DCB) which showed the single peak in the GC-ECD chromatogram. The detectable concentrations of PCBs was 0.5ng/g in the sediment. PCBs in the 21 sediment samples was of Kumho River located at 7.5km from conjunction of Nakdong River were not detected from 100 samples. 49% of samples was showed lower than 50ng/g, and 9% did more than 400ng/g. The mean of PCBs concentrations was 131ng/g. The means of COD and organic carbon were 14.5mg/g and 3.41%, respectively. The relationship between PCBs were concentration and the distance from conjunction with Nakdong River was not significant. The concentration of PCBs were varied with the depth of the sediment down to the 250cm depth. The concentrations of PCBs in the depth 0-20cm and 50-90cm were higher than the mean concentration of PCBs. Along the cross of the stream, the concentrations of PCBs were 142ng/g at the center and 126 and 131ng/g at the river sides.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.453-458
• /
• 2008

Laboratory experiments were conducted to investigate disinfection as well as removal of color and residual organics from reclaimed municipal wastewater by electrochemical processes with Nb/Pt anode installed. RNO was rapidly bleached by OH$\cdot$ and the second order rate constants of RNO removal were $\frac{0.223l}{mg{\cdot}min}$, $\frac{1.679l}{mg{\cdot}min}$ and $\frac{2.322l}{mg{\cdot}min}$ with for 5 A, 10 A, and 15 A, respectively, with r$^2$ of > 96%. In batch electrochemical processes, after 15 min at currency of 15 A and initial pH of 5, 7,5 and 9, COD$_{Mn}$ was below 4 mg/L, color unit below 5 degree and general bacteria was not detected, the concentration of which are suitable for drinking water regulation. In the continuous electrochemical process, with HRT of 3.7$\sim$49.2 min, free chlorine were 0.2$\sim$0.7 mg/L, general bacteria was not detected, color unit below 5 degree and THMs was 0.017 mg/L. Therefore, electrochemical process with Nb/Pt anode was employed satisfactory to meet for reusing biologically treated water as well as disinfection.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.68-74
• /
• 1999

The Concentrations of PCDDs/PCDFs and their precusors(chlorophenols, chlorobenzenes, PCB) were analyzed from the dioxin control device such as EP and SCR to know the emission patterns of these compounds and find the dioxin index compounds. The dioxin concentration increased 7 times in outlet part than inlet part of EP and the concentration of CBs, CPs and PCBs also were increased through this control device. These phenomia may be related to the operating temperature of Electroprecipitator(EP), which the operating temperature is near the $300^{\circ}C$, the method of the decreasing the operating temperature need to consider to prevent the formation of these compounds. In the selected catalytic reactor with wet scrubber(SCR+WS), these compounds were removed after passing the device over 90% for CPs, 30~40% for CBs and 60% for PCBs. But, the systematic study have to perform to reduce the formation of PCDDs/PCDFs and precusors.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.3
• /
• pp.271-277
• /
• 2010

The purpose of this study is to investigate the seasonal variation of picoplankton community in Lake Juam depending on the change of physico-chemical factors such as rainfall, water depth, DO and pH. The concentration of chlorophyll-a was most high as 18.03 mg/$m^3$ in July when the rainfall and water temperature were highest. The concentration was gradually decreased in October, April and that of January was decreased most low as 1.86 mg/$m^3$. The highest concentration of the Chl-a was shown at 2 and 5 m of water depth than surface, and the concentration was gradually decreased when the water depth becomes deep. Overall, microplankton was the highest rate as 33.9~54.2%, nanoplankton was 24.3~30.5% and picoplankton was 21.6~41.2%. Picoplankton was included as considerable concentration in the water of Juam lake. Therefore it is necessary to remove thoroughly the picoplankton in the water treatment processes such coagulation·sedimentation and sand filtration. The protoplasm released from destruction of picoplankton by chlorine has high possibility to cause regrowth of bacteria and pathogenic microorganism in the distribution system by playing the role of the assimilable organic carbon.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.9
• /
• pp.521-527
• /
• 2016

Nanoscale zero valent iron (nZVI) has been intensively studied for the treatment of a plethora of pollutants through reductive reaction, however, the nano size should be of concern when nZVI is considered for water treatment, due to difficulties in recovery. The loss of nZVI causes not only economical loss, but also potential risk to human health and environment. Thus, the immobilization onto coarse or structured support is essential. In this study, two representative processes for nZVI immobilization on granular activated carbon (GAC) were evaluated, and optimized conditions for synthesizing Fe/GAC composite were suggested. Both total iron content and $Fe_0$ content can be significantly affected by preparation processes, therefore, it was important to avoid oxidation during preparation to achieve higher reduction capacity. Synthesis conditions such as reduction time and existence of intermediate drying step were investigated to improve $Fe_0$ content of Fe/GAC composites. The optimal condition was two hours of $NaBH_4$ reduction without intermediate drying process. The prepared Fe/GAC composite showed synergistic effect of the adsorption capability of the GAC and the degradation capability of the nZVI, which make this composite a very effective material for environmental remediation.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.2
• /
• pp.73-81
• /
• 2002

In normal Fenton's reagent, the reductive mechanism of carbon tetrachloride (CT) with superoxide radical (${O_2}^-$.) was observed and the rate of ${O_2}^-$. production was investigated as a function of $H_2O$$_2$ concentration and pH. As pH was increased, the rate of 1-hexanol degradation was rapidly decreased from 90% (at pH 3) to 5% (at pH 11). On the other hand, more degradation of carbon tetrachloride was observed at higher pH regimes indicating Fenton's reaction is an oxidant-reductant co-existing system at neutral pHs. The rate of $O_2^{-}$ . production was observed at different $H_2$$O_2$ concentrations and at different pHs. The rate increased from (45.3$\pm$7.8) x $10^{-6}$ M/s to (151.0$\pm$26.2) x $10^{-6}$ M/s ($294mM H_2$$O_2$) at pH 11: the rate 3150 increased from (22.1$\pm$3.8) x $10^{-6}$ M/s at pH 7 to (151.0$\pm$26.2) x $^10{-6}$ M/s at pH 11 with 294mM $H_2$$O_2$, These results showed that Fenton's reagent could be applied at wide pH regimes. Especially, carbon tetrachloride, which can not be easily adsorbed to soils and then can be dissolved into groundwater causing a cancer, could be efficiently treated by Fenton's reagent.reagent.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.801-806
• /
• 2002

The decomposition and/or conversion of carbon dioxide to carbon have been studied using oxygen-deficient ferrites for the reduction of $CO_2$ emission to the atmosphere. In this work, the homogeneous precipitation method using urea decomposition was employed to induce in situ precipitation of Ni ferrite($Ni_{0.4}Fe_{2.6}O_4$) on the porous ceramic fiber support (50 mm diameter${\times}$10 mm thickness). Effects of ferrite loading conditions on the CO2 decomposition efficiency were discussed in this paper. Removal of residual chloride ions and urea by solvent exchange from the porous media after ferrite deposition apparently helps to form spinel ferrite, but does not increase the efficiency of $CO_2$ decomposition. Porous ceramic fiber composites containing 20 wt% (1g) ferrite samples showed 100% efficiency for $CO_2$decomposition during the first three minutes, but the efficiency decreased rapidly after the elapsed time of ten minutes. The characteristic reduction time for the $CO_2$ decomposition efficiency was estimated as about 3∼7 min.