• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.6
• /
• pp.21-27
• /
• 2019

Cellulose-based carbon fabrics are used in aerospace nozzles have low thermal conductivity and high ablation resistance. However, there is a disadvantage in that the weight is reduced by 70~90% in the pyrolysis process and graphitization process and the residual rate is low when the final carbon fabric is produced. In this study, phosphoric acid as a phosphorus flame retardant and Citric acid as a cross-linking agent were treated on the lyocell fabrics. After that the functional groups were identified and thermal properties were confirmed by FT-IR, XRD and TGA. The yields of the final carbon fabrics were also compared through the pyrolysis and graphitization process. The graphitized yield increased to 8.1% with increasing citric acid to 16 wt% added.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.4
• /
• pp.233-243
• /
• 1994

Constitutive relation of thermoelasto-plastic material undergoing phase transformation during quenching process were developed on the basic of continuum thermodynamics. The metallic structure, temperature and residual stresses distributions were numerically calculated by the finite element technique. The metallic structure were defined by transformation from austenite to pearlite and characterized as a fuction of thermal history and mixture rule of phase. On the distribution of thermal stress along the radial direction, axial and tangential stresses are compressive in the surface, and tential in the inner part. Radial stress is tensile in the whole body. The reversion of residual stress takes plase at 11.5~15.5mm from the center.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.119-119
• /
• 2003

탄화규소나 열분해 탄소는 고온 특성 및 화학적인 안정성 이 우수하여 단미 혹은 코팅재로로 소재의 성능을 향상시키기 위하여 에너지 관련 분야, 반도체 치구 분야, 방위산업 및 항공우주 분야와 원자력 분야에서 다양하게 사용된다. 특히 원자력 분야에서는 고온형 원자로의 노심 요소 부품으로 적용 및 개발을 고려하고 있으며, 대표적인 예로 수소생산용 초고온 가스냉각로의 코팅 핵연료 입자를 들 수 있다. 일반적으로 TRISO라 불리는 가스냉각로 핵연료는 구형 $UO_2$ kemel의 주변을 PyC-SiC -PyC의 삼중 코팅층으로 둘러싸는 구조를 하고 있으며, 이 코팅층들은 kernel물질이 분열하는 동안 발생되는 내부 기체 압력을 견디는 압력용기 역할과 기체나 금속 핵분열 생성물들을 가두는 확산 장벽 역할을 하게 된다. 본 연구에서는 구형의 $UO_2$대신 선행연구를 위하여 구형 ZrO$_2$를 이용하여 증착온도나 시간 및 입력기체비 등의 화학증착 변수로 조절하여 SiC 및 PyC을 코팅하고, 각 변수들에 의한 증착층의 거동을 고찰하고자 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1065-1073
• /
• 2009

In this paper, the estimation method of C(t)-integral for combined mechanical and thermal loads is proposed for elastic-plastic-creep material via 3-dimensional FE analyses. Plasticity induced by initial loading makes relaxation rate different from those produced elastically. Moreover, the interactions between mechanical and thermal loads make the relaxation rate different from those produced under mechanical load alone. To quantify C(t)-integral for combined mechanical and thermal loads, the simplified formula are developed by modifying redistribution time in existing work done by Ainsworth et al..

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.453-456
• /
• 2007

감압 증류 후 생성되는 중질유의 고도화를 위하여 코킹 공정을 거친 후 정유 부산물로 생성되는 열적으로 매우 안정하고, 높은 발열량을 갖는 반면 황, 바나듐 함량이 높은 석유코크스의 효과적인 이용을 위하여 본 연구에서는 가스화 공정을 적용하였다. 1T/D 용량의 분류층 가스화기를 이용하여 유연탄(drayton coal), 석유코크스, 또는 혼합한 경우의 가스화 성능을 알아보았으며, 각각의 경우에 대하여 비교하여 보았다. 높은 열 안정성을 갖는 석유코크스의 효과적인 가스화를 위하여 반응기 내 체류시간 및 버너 노즐 변경에 따른 가스화 성능 개선을 시도하였으며, 이때의 온도, 산소/원료 공급량 조건에 따른 생성가스 성분 및 탄소전환율, 냉가스효율 변화 특성을 알아보았다. 버너 노즐 구경 변경으로 인한 슬러리의 미립화를 통하여 향상된 탄소전환율 및 냉가스효율을 얻을 수 있었다.

• Journal of Korea Foundry Society
• /
• v.13 no.1
• /
• pp.81-93
• /
• 1993

It is well-known that the analysis of elasto-plastic thermal stress and deformation are substantially important in optimal design of metal casting mould. The unsteady state thermal stress and deformation generated during the solidification process of ingot and mould have been analyzed by two dimensional thermal elasto-plastic theories. Distributions of temperature, stress and relative displacement of the mould are calculated by the finite element method and compared with experimental results. In the elasto-plastic thermal stress analysis, compressive stress occurred at the inside wall of the mould whereas tensile stress occurred at outside wall. A coincidence between the analytical and experimental results is found to be fairly good, showing that the proposed analytical method is reliable.

• Journal of Welding and Joining
• /
• v.9 no.2
• /
• pp.37-43
• /
• 1991

In order to analyze the mechanical phenomena of three dimensional elato-plastic behavior caused by welding of thick plate, it is necessary to solve exactly the three dimensional unstationary heat conduction problem considering the moving effect of heat source and the temperature-dependence of material properties. In this paper, the three-dimensional unstationary heat conduction problem is formulated by using an isoparametric finite element method. Thereafter, the transient temperature distributions, according to time, of thick plate during welding are defined from the results calculated by the developed computer program.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.1
• /
• pp.12-23
• /
• 1995

In this a set of constitutive equation relevant to the analysis of thermo-elasto-plastic materials with phase transformation during quenching process was presented on the basis of continuum thermo-dynamic. In calculating the transient thermal stresses, temperature between coolant and specimen(SM45C) surface was determined from the heat transfer coefficient. A calculation was made for specimen with 40mm in diameter quenched in coolant from $820^{\circ}C$ and the results are as follow. Stresses at starting point of transformation always show the maximum tensile value. Reverse of stresses takes place after completion of transformation of inner part at specimen.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.52-57
• /
• 1997

국제 열 핵융합로 (International Thermonuclear Experimental Reactor) 의 중앙 솔레노이드(solenoid) 초전도 전자석의 피복관 (conduit) 으로서 가장 유력한 후보 재료인 니켈-철 기저 초합금에 대한 개선된 파괴역학적 거동 예측 모형을 개발하기 위하여 피로균열 성장과 파괴 인성 치의 측정이 사용되었다. 유한 요소법을 사용하는 상용 구조해석 코드인 ANSYS 제 5.2판에 의해 초전도 전자석 피복관 재료에 대한 탄소성 파괴역학적 거동을 살펴보았다. 정확한 파괴 기준을 개발하기 위하여 삼차원 J 적분 인자에 의한 결과를 사용하였다. 얇은 피복관재의 경우에 절대온도 4도에서의 적합한 파괴 인성치는 실제 단면효과를 고려한 표면균열 인장시험 결과를 토대로 J 적분으로 도출한 150 MPaㆍm$^{1}$2/ 로 제시되었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.769-774
• /
• 2013

Turbine blades and disc, which are one of the most important rotating parts of a gas turbine engine, are required to have highly efficient performance in order to minimize the total life cycle costs. Owing to these requirements, these components are exposed to severe conditions such as extreme turbine inlet temperatures, high compression ratios, and high speeds. To evaluate the structural integrity of a turbine disc under these conditions, material modeling and finite element analysis techniques are essential; furthermore, shape optimization is necessary for determining the optimal solution. This study aims to generate 2D finite element models of an axisymmetry model and a sector one and to perform thermal-structural coupled-field analysis and contact analysis. Structurally vulnerable areas such as the disc bore and disc-blade interface region are analyzed by a parametric study. Finally, an improved design is provided based on the results, and the necessity of elaborate shape optimization is confirmed.