• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.488-491
• /
• 2011

The thermo-structural analysis of the solid-fuel propulsion Nozzle is studied to estimate the thermo-structural safety of the metal nozzle. The thermal load is determined to be significantly large, Because the metal nozzle in a short combustion time is directly exposed to high pressure and temperature of combustion gas. Through a analysis result, the influence of a thermal load is estimated and henceforward a design data of thruster is used.

• Laser Solutions
• /
• v.16 no.2
• /
• pp.7-11
• /
• 2013

Recently advanced laser processing is widely introduced to improve the efficiency of micro part production and to reduce the rate of inferior goods. In this paper the trend of delamination of single layer with both thin copper and polyimide according to the variation of copper thickness was investigated using the coupled thermal-structural analysis of ANSYS. From these analyses results, some conclusions were obtained. Firstly, the maximum temperature was increasing with respect to decrease of copper thickness. Secondly the maximum strain which was in general estimation the main effect of the delamination was observed in case of the copper thickness of $5{\mu}m$. Finally the trend of the delamination was decreasing with increasing the thickness of copper layer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.197-198
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.741-742
• /
• 2008

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.290-291
• /
• 2011

본 논문에서는 열-전기-기계 하중 하의 지능형 복합재료 보 모델을 전산점근해석기법에 기초하여 개발하였다. 열-전기-기계 하중 하의 구조물은 지난 십년간 많은 연구가 있어왔으나, 주로 고전적 보 모델에 기반을 두어 진행되어져 왔다. 멀티피직스 환경하의 구조물은 여러 가지 하중의 조합과 이에 따른 연성효과의 고려가 필수적이다. 따라서 공학적인 가정이 없는 점근해석기법은 보다 정확한 등가 보 모델을 개발하는데 있어 기반요소가 될 수 있다. 본 연구에서는 3차원 멀티피직스 구성방정식으로부터 출발하여 점근기법을 적용 체계적으로 등가 보 모델을 유도하고 그 해석 결과를 고찰하고자 한다.

• Journal of Navigation and Port Research
• /
• v.45 no.4
• /
• pp.212-223
• /
• 2021

The objective of this study was to evaluate structural safety according to environmental conditions acting on the piping of offshore structure and the motion of the structure. As for conditions acting on the piping, the maximum and minimum temperature conditions were used to analyze the design conditions of N2 generator. The motion of the structure was calculated and applied according to the DNV(Det Norske Veritas) rule. Each condition was combined and a total of 26 load combinations were constructed according to thermal load, motion load, and presence or absence of pipe support. Analysis was performed using a commercial program MSC Patran/Nastran. Thermal analysis was performed by applying the steady-state method, Sol 153. Thermal-structural coupled analysis was performed using Sol 101, a linear-static method. As a result of the analysis, the stress tended to increase when temperature inside the pipe was lower in Set 1 and Set 2, when temperature was higher in Set 3, and when the temperature difference between the inside and outside of the pipe in Set 4 was increased. However, the sum of stresses in the condition with only temperature load and the condition with only the kinetic load did not show the same value as the stress in the composite load condition of two loads. That is, the influence of the motion load varied depending on the direction of motion, the arrangement of pipes, and the position of the support. Therefore, it is necessary to comprehensively consider the size and direction of the motion load acting on the piping, the arrangement of the piping, and the location of the pipe supports during the design of piping.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.727-739
• /
• 2002

Based on a generalized variational principle for magneto-thermo-elasticity, a theoretical model is proposed to describe the coupled magneto-thermo-elastic interaction in soft ferromagnetic plates. Using the linearized theory of magneto-elasticity and perturbation technique, we analyze the magneto-elastic and magneto-thermo-elastic instability of simply supported ferromagnetic plates subjected to thermal and magnetic fields. A nonlinear finite element procedure is developed next to simulate the magneto-thermo-elastic behavior of a finite-size ferromagnetic plates. The effects of thermal and magnetic fields on the magneto-thermo-elastic bending and buckling is investigated in some detail.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1233-1234
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1235-1236
• /
• 2010

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.347-354
• /
• 2004

Using an efficient adjoint variable method, we develop a unified design sensitivity analysis (DSA) method considering both steady state nonlinear heat conduction and geometrical nonlinear elasticity problems. Design sensitivity expressions with respect to thermal conductivity and Young's modulus are derived. Beside the temperature and displacement adjoint equations, another coupled one is defined regarding the obtained adjoint displacement field as the adjoint load in temperature field. The developed DSA method is shown to be very efficient and further extended to a topology design optimization method for the nonlinear weakly coupled thermo-elasticity problems using a density approach.