• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.227.2-227.2
• /
• 2012

대구경 고해상도 광학탑재체의 광구조부는 주반사경과 부반사경 등을 포함한 주요 광학부품들과 검출기를 포함한 초점면 조립부 등을 고정 지지해주는 부분으로, 발사시 전달되는 진동 및 우주 열환경하에서의 길이 안정성을 광학성능 범위내로 유지하여야 한다. 광학탑재체의 성능에 가장 큰 영향을 미치는 것은 주반사경과 부반사경의 광축방향의 길이 안정성으로, 광학탑재체의 작동 온도범위 내에서 수 마이크로미터 내외로 안정성이 요구된다. 이를 실현하기 위하여 주반사경과 부반사경의 간격은 열 및 흡습에 둔감한 탄소섬유 강화수지 복합재로 되어 있는 경통 구조물로 설계, 제작된다. 제작된 경통구조물의 길이 안정성을 검증하기 위해서는 별도의 정밀 측정장치가 필요하게 된다. 본 논문에서는 이러한 길이 안정성 측정장치에 대해 기술한다. 온도에 대해 변화가 거의 없는 (CTE<0.1ppm/K) Zerodur 소재의 막대 구조물을 기준 스케일로 삼았고, 이를 지지하기 위해 Invar 소재의 구조물을 사용 하였다. 주반사경의 베젤부위와 부반사경의 접속부위의 변위 변화를 세점에서 측정하여 길이 안정성을 측정할 수 있게 하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.488-491
• /
• 2011

The thermo-structural analysis of the solid-fuel propulsion Nozzle is studied to estimate the thermo-structural safety of the metal nozzle. The thermal load is determined to be significantly large, Because the metal nozzle in a short combustion time is directly exposed to high pressure and temperature of combustion gas. Through a analysis result, the influence of a thermal load is estimated and henceforward a design data of thruster is used.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.291-295
• /
• 2011

Thermo-structural analysis was performed for a radiation-cooled nozzle extension of thrust chamber. A Niobium alloy that is known to be a high-performance refractory alloy was used. Since area ratio of the nozzle extension is larger than that of nozzle divergence part, its size also becomes larger. For this reason, it is important to minimize the thickness of nozzle extension to reduce its weight. For the purpose of weight minimization, the thickness of nozzle extension was varied from 1.0 mm to 0.4 mm and structural stability was evaluated for each case. Analysis results showed that nozzle extension with thickness of 0.4 mm is structurally stable for the operation condition. The effect of combustion-included vibration will be additionally considered in the future.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.09a
• /
• pp.23-38
• /
• 1995

고분자막에 의한 기체분리는 심냉분리법, 흡수법, 흡착법등에 비하여 에너지가 절약되며 장치가 간결하고 운전비용이 낮은 이점 때문에 여러가지 기체혼합물에 대하여 여러가지 목적으로 응용되기에 이르렀다. O$_{2}$/N$_{2}$ 분리막으로 요구되는 기본특성은 1) 높은 O$_{2}$ 투과성 2) 높은 O$_{2}$ 선택성 3) 막 형성에 충분한 기계적 강도 4) 열, 화학적으로 안정성이 있어야 한다. 그런데 투과계수 P$_{O_(2)}$와 투과선택도 P$_{O_(2)}$/P$_{N_(2)}$ 관계 Fig.2 에서 보는 바와 샅이 대체로 투과선택성은 상반관계에 있어서 polyimide는 높은 선택성을 나타내고 기계적 강도가 좋고 높은 열에 대하여 안정하기 때문에 일단 막재료로 양호한 조건을 갖추고 있으나 투과계수가 크지 않아 선택도를 크게 감소시키지 않으면서 투과계수를 향성시키려는 노력이 경주되고 있다. 따라서 polyimide의 화학구조와 투과계수, 투과선택도의 관계를 고찰하는 것은 대단히 중요하다. 특히 최근에는 polyimide의 화학구조를 계통적으로 변화 시켜가면서 구조와 투과특성을 고찰한 연구가 많으며, 이러한 연구를 총망라하여 화학구조와 투과특성을 고찰한 훌륭한 총설들이 발표되어왔다. Fig.3에는 지금까지 연구된 중요한 polyimide를 형성하는 dianhydride와 diamine의 구조식을 표시하였으며 이들 구조의 변화에 의하여 기체투과계수와 투과선택도가 어떤 영향을 받는지 고찰하고자 한다.

• Composites Research
• /
• v.15 no.3
• /
• pp.18-29
• /
• 2002

The bending vibration and thermal flutter instability of spacecraft booms modeled as circular thin-walled beams of closed cross-section and subjected to thermal radiation loading is investigated in this paper. The thin-walled beam model incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constituent materials. Thermally induced vibration response characteristics of a composite thin walled beam exhibiting the circumferantially uniform system(CUS) configuration are exploited in connection with the structural flapwise bending-lagwise bending coupling resulting from directional properties of fiber reinforced composite materials and from ply stacking sequence. The numerical simulations display deflection time-history as a function of the ply-angle of fibers of the composite materials, damping factor, incident angle of solar heat flux, as well as the boundary of the thermal flutter instability domain. The adaptive control are provided by a system of piezoelectric devices whose sensing and actuating functions are combined and that are bonded or embedded into the host structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1119-1127
• /
• 2010

In this paper, the design and nonlinear simulation of a multistable electromagnetic microactuator, which provides four stable equilibrium positions within its operating range, have been discussed. Quadstable actuator motion has been made possible by using both X- and Y-directional bistable structures with snapping curved beams. Two pairs of the curved beams are attached to an inner frame in both X- and Y-directions to realize independent bistable behavior in each direction. For the actuation of the actuator at the micrometer scale, an electromagnetic actuation method in which Lorentz force is taken into consideration was used. By using this method, micrometer-stroke quadstability in a plane parallel to a substrate was possible. The feasibility of designing an actuator that can realize quadstable motion by using the electromagnetic actuation method has been thoroughly clarified by performing nonlinear static and dynamic analyses and electrothermal coupled-field analysis of the multistable microactuator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.99-104
• /
• 2005

The major role of a spacecraft structure is to keep and support the spacecraft safely in all the launch environment, on-orbit condition and during ground-transportation and handling. In a satellite development, a structural and thermal model (STM) is developed for two goals ; demonstration of a structural and a thermal stability. In the structure point of view, STM is used to verify the static/dynamic characteristics of structure in the initial stage of development. In this paper, the structure design/analysis of high resolution LEO earth observation satellite STM is described. Also, a low level sine vibration test is performed and compared to the results of finite element analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.1
• /
• pp.56-64
• /
• 2002

Thermally induced vibration response of composite thin-walled beams is investigated in this paper. The flexible spacecraft appendages modeled as thin-walled beam incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constitute materials. Thermally induced vibration responds characteristics of a composite thin walled beam exhibiting the circumferantially uniform system(CUS) configuration are exploited in connection with the structural flapwise bending lagwise bending coupling resulting from directioal properties of fiber reinforced composite materials and ply stacking sequence. A coupled thermal structure gradient is investigated.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1999.03a
• /
• pp.59-64
• /
• 1999

지하암반은 계절적 대기온도 변화의 영향을 거의 받지 않는 온도조건 및 뛰어난 단열성으로 인해 물류의 저온냉동저장이나 액화연료의 저장 등을 위한 좋은 대상으로 인식되고 있다. 이러한 분야에 있어서 암반의 열물성 및 열유동 특성은 매우 중요한 요소로서, 이는 장기적인 에너지절약 및 지하구조물의 열역학적 안정성의 정확한 평가와 직접적 연관이 된다. (중략)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.100-107
• /
• 2020

As demand for high value-added products with hard materials increases, the line center is used for producing high value-added products in many industries such as aerospace, automobile fields. The line center is a key device for smart factory automation that can improve the production efficiency and the productivity. Therefore, the development of a mill-turn line center is necessary to produce high value-added products with complex shapes flexibly. In the mill-turn process, a milling process and a turning process are combined. In particular, the turning process needs to increase the rigidity of the spindle. The purpose of this study is to analyze the thermal-structural stability through thermo-structural coupled analysis for a mill-turn spindle with a curvic coupling. The maximum temperature and thermal stability of the spindle were analyzed by thermal distribution. In addition, the thermal deformation and thermal-structural stability of the spindle were analyzed through thermo-structural coupled analysis.