• Journal of Energy Engineering
• /
• v.15 no.2 s.46
• /
• pp.107-117
• /
• 2006

The status of water splitting thermochemical cycle for hydrogen production was reviewed in this article. Mass production of hydrogen could be possible using the thermochemical process which is similar to the concept of conventional chemical reaction system if the high temperature heat source is available. The mediators (chemicals and reagents) should be used to split chemically stable water, and should be recycled in a closed cycle in order to be environmentally acceptable. Though there is no process to reach commercial stage, IS cycle, two-step cycles based on metallic oxide such as ZnO/Zn, $Fe_3O_4/FeO$ and the associated cycles are attracted due to their possibilities of application. Development of materials for high temperature and/or corrosive conditions during thermochemical process is still important topic in some thermochemical processes.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.2
• /
• pp.132-138
• /
• 2008

금속산화물의 열화학싸이클에 의한 수소생산 소재중 안정성이 우수하고 물분해 수소생산능이 비교적 우수한 $NiFe_2O_4$를 합성하여 열화학수소생산공정 적용시 최적화의 조건에 대하여 검토하였다. 합성한 $NiFe_2O_4$는 격자상수가 $8.34\;{\AA}$이었고, 뫼스바우어에 의해 구조는 Ni이 페라이트 구조인 $AB_2O$의 B위치에 주로 위치하는, A 및 B의 상대적 흡수강도가 57.9:42.1인 역스피넬구조를 보이고 있다. 이러한 구조의 $NiFe_2O_4$의 열적환원은 $610^{\circ}C$부터 시작하여 $1200^{\circ}C$에 이르는 동안 약 1.1 wt%의 무게감소가 관찰된다. 물에 의한 산화과정에서 수소가 발생하게 되는데, $1200^{\circ}C$이하의 환원온도에서 가능한 수소생산량은 약 $0.45\;cm^3/g{\codt}cycle$ 이었다. 산화 환원의 반복과정에서 $NiFe_2O_4$의 XRD에 의한 구조변화는 관찰되지 않아 매우 안정한 구조를 갖는다는 것을 보여주었다. 수소생산을 위한 무게당 싸이클당 수소생산양은 산화 환원과정의 온도범위가 가장 중요하였고 물의 접촉시간은 중요한 요소가 되지 않았다. 열적 환원과정에서 많은 양의 수소생산성능을 보이기 위해서는 $1200^{\circ}C$이상의 고온을 필요로 하는 것을 보여주었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.2
• /
• pp.139-151
• /
• 2011

The sulfur-iodine (SI) thermochemical water splitting cycle is one of promising hydrogen production methods from water using high-temperature heat generated from a high temperature gas-cooled nuclear reactor (HTGR). The SI cycle consists of three main units, such as Bunsen reaction, HI decomposition, and $H_2SO_4$ decomposition. The feasibility of continuous operation of a series of subunits for $H_2SO_4$ decomposition was investigated with a bench-scale facility working at ambient pressure. It showed stable and reproducible $H_2SO_4$ decomposition by steadily producing $SO_2$ and $O_2$ corresponding to a capacity of 1 mol/h $H_2$ for 24 hrs.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.124.2-124
• /
• 2003

• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.110-115
• /
• 2024

Global sustainable energy needs and carbon neutrality goals make hydrogen a key future energy source. South Korea and Japan lead with proactive hydrogen policies, including South Korea's Hydrogen Law and Japan's strategy updates aiming for a hydrogen-centric society by 2050. A notable advance is the solar thermal chemical water-splitting cycle for green hydrogen production, spotlighted by Korea Institute of Energy Research (KIER) and Niigata University's joint initiative. This method uses solar energy to split water into hydrogen and oxygen, offering a carbon-neutral hydrogen production route. The study focuses on international collaboration in solar energy for thermochemical water-splitting and E-fuel production, highlighting breakthroughs in catalyst and reactor design to enhance solar thermal technology's commercial viability for sustainable fuel production. Collaborations, like ARENA in Australia, target global carbon emission reduction and energy system sustainability, contributing to a cleaner, sustainable energy future.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.1
• /
• pp.32-38
• /
• 2004

Thermal behaviors of $(Cu_{0.5}Mn_{0.5})Fe_2O_4$, prepared by a solid method, were investigated for $H_2$ production by a thermochemical cycle. The thermal reduction of $(Cu_{0.5}Mn_{0.5})Fe_2O_4$ started from $300^\circ{C}$ and the weight loss was 1.3 wt% up to 1200. XRD shows the prepared ferrite has the spinel structure with a lattice constant of $8.414{\AA}$ and changed to the oxygen deficient structure by thermal reduction. Oxygen and hydrogen can be separately produced by the cycles of thermal reduction and water oxidation of the oxygen deficient ferrite.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.198-204
• /
• 2013

Acoustic emission(AE) signal was detected during charge and discharge of lithium ion battery to investigate relationships among cumulative count, discharge capacity, and microdamages. AE signal was received during accelerated charge/discharge cycle test of a coin-type commercial battery. A number of AE signals were successfully detected during charge and discharge, respectively. With increasing number of cycle, discharge capacity was decreased and AE cumulative count was observed to increase. Microstructural observation of the decomposed battery after cycle test revealed mechanical damages such as interface delamination and microcracking of the electrodes. These damages were attributed to sources of the detected AE signals. Based on a linear correlation between discharge capacity and cumulative count, feasibility of AE technique for evaluation of battery degradation was suggested.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.1
• /
• pp.51-59
• /
• 2011

Sulfur-Iodine (SI) cycle, which thermochemically splits water to hydrogen and oxygen through three stages of Bunsen reaction, HI decomposition, and $H_2SO_4$ decomposition, seems a promising process to produce hydrogen massively. Among them, the decomposition of $H_2SO_4$ ($H_2SO_4=H_2O+SO_2+1/2O_2$) requires high temperature heat over $800^{\circ}C$ such as the heat from concentrated solar energy or a very high temperature gas-cooled nuclear reactor. Because of harsh reaction conditions of high temperature and pressure with extremely corrosive reactants and products, there have been scarce and limited number of data reported on the pressurized $H_2SO_4$ decomposition. This work focuses whether the $H_2SO_4$ decomposition can occur at high pressure in a noble-metal reactor, which possibly resists corrosive acidic chemicals and possesses catalytic activity for the reaction. Decomposition reactions were conducted in a Pt-lined tubular reactor without any other catalytic species at conditions of $800^{\circ}C$ to $900^{\circ}C$ and 0 bar (ambient pressure) to 10 bar with 95 wt% $H_2SO_4$. The Pt-lined reactor was found to endure the corrosive pressurized condition, and its inner surface successfully carried out a catalytic role in decomposing $H_2SO_4$ to $SO_2$ and $O_2$. This preliminary result has proposed the availability of noble metal-lined reactors for the high temperature, high pressure sulfuric acid decomposition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.945-952
• /
• 2020

In this study, the effects of Low Earth Orbit(LEO) environments on the degradation behavior of epoxy nano silica composite materials were investigated. The nanocomposite materials containing silica particles in different weight ratios of 10% and 18% were prepared and degraded in a LEO simulator to compare with the neat epoxy cases. Thermogravimetric analysis (TGA) was performed on the degraded nanocomposites and the activation energies were calculated by Friedman method, Flynn-Wall-Ozawa (FWO) method, Kissinger method, and DAEM (Distributed Activation Energy Method) based on the iso-conversional method. As the results, for the neat epoxy sample cases, it was found that the average activation energy was increased as the degradation was progressed. When the nano particles were mixed, however, the energy increased to the 15 environmental test cycles, and decreased afterwards, meaning that the particle mixture contributed adversely to the thermal degradation. Discussions on the results of the different calculation methods were also given.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.93-100
• /
• 2013

Two-step thermochemical cycle using ferrite-oxide($Fe_2O_4$) device was investigated. The $H_2O$(g) was converted into $H_2$ in the first experiment which was performed using a dish type solar thermal system. However the experiment was lasted only for 2 cycles because the metal oxide device was sintered and broken down. Another problem was that the reaction was taken place mainly on a side of the metal oxide device. The m-$ZrO_2$, which was widely known as a material preventing sintering, was applied on the metal oxide device. The ferrite loading rate and the thickness of the metal oxide device were increased from 10.67wt% to 20wt% and from 10mm to 15mm, respectively. The chemical reactor having two inlets was designed in order to supply the reactants uniformly to the metal oxide device. The second-experiment was lasted for 5 cycles, which was for 6 hours. The total amount of the $H_2$ production was 861.30ml. And cerium oxide($CeO_2$) device was used for increasing $H_2$ production rate. $CeO_2$ device had low thermal resistance, however, more $H_2$ production rate than $Fe_2O_4$ device.