• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.25-29
• /
• 2002

Single ion exchange process was used, and the ion exchange behavior and mechanical properties were investigated in substrate glass for flat panel display. In order to study the effects of ion exchange, ion exchange behavior with ion penetration depth, amount of ion exchange, density and thermal expansion was measured according to the time and temperature. The mechanical properties were evaluated by the three point bending test and curvature change, and then the fracture patterns were investigated by optical microscope.

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.2
• /
• pp.55-62
• /
• 1997

P2O3-PbO-SiO2-Al2O3계 조성을 이용하여 저온에서 소결이 가증하며 열팽창계수와 유전율이 낮은 회로기판용 glass ceramics를 제조하고자 하였다. 155$0^{\circ}C$에서 2시간 동안 용 융하여 제조한 모유리의열팽창 거동을 확인하기 위하여 TMA로 열분석을 실시하였으며 이 유리를 분말화하여 80$0^{\circ}C$에서 열처리 하였다. 이때 cristobalite 형성억제제로 Ga2O3를 사용 하였으며 Ga2O3 첨가량에 따른 억제 영향을 XRD를 통행 확인하였다. Ga2O3를 첨가한 유리 분말로 pellet을 제조하여 열처리를 하였고 소결시편의 표면을 SEM을 통해 관찰하였다. 열 처리한 pellet에 silver paste를 screen printing하여 유전율을 측정하였으며 조성에 따른 유 전율의 변화를 확인하였다.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.46-55
• /
• 1989

Zirconia coatings are performed by the plasma spraying on the substrate of Al-Si alloy. In case of plasma sprayed ceramic coatings, it is important to control properly residual stress occurred during cooling process. Residual stress in coating layer varies with sprayed conditions and is influenced greatly by the coating layer thickness. Surface residual stress due to coating layer thickness is measured by X-ray diffraction method and the residual stress in coating layer is estimated by the deflection of coating layer when the restraint force in substrate was removed. When zirconia was coated on the substrate, tensile residual stress remains on zirconia coated surface layer. The tensile stress is increased to 0.35mm thickness and after 0.45mm thickness it is decreased abrouptly. A thick bond and composite coating reduce the zirconia surface stress and composite coating controls effectively the thick zirconia surface stress.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.176-184
• /
• 1993

The glasses, which the $\beta$-spodumene as the principal crystalline phase could be precipitated, were melted by adding >, $P_2O_5, TiO_2, ZrO_2 in the Li_2O-Al_2O_3-SiO_2$ system. In order to achieve the glass-ceramic body of near-theoritical density by sintering method, the optimum condition of heat treatment, the effect of glass powder size and the properties were investigated by DTA, XRD, bulk density, thermal expansion and SEM. Addition of $P_20_5$ imProved the tendency of sintering and the sample with 9wt% $P_20_5$ content was the most dense OOdy by sintering method. The optimum condition of heat treatmemt was sintered for densitification at $740^{\circ}C$ and crystallized at $950^{\circ}C$. In the optimum condition, the relative density was above 90% and the thermal expansion was negative about $-1{\times}10^{-7}/^{\circ}C$.

• Composites Research
• /
• v.28 no.4
• /
• pp.226-231
• /
• 2015

Various characteristics(thermal expansion, microstructure, etc.) and mechanical properties of CNT-aluminum nano composites manufactured by volume production system were evaluated. Also, formability and durability were evaluated for potential applications in automotive parts, via compared with high-elasticity material (A390) and the current commercial product. As a result, this composite has excellent mechanical properties and formability, therefore, to verity its potential for application as light and high strength materials in automobile part.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.89-93
• /
• 2020

Complex warpage behavior of the electronic packages causes internal stress so many kinds of mechanical failure occur such as delamination or crack. Efforts to predict the warpage behavior accurately in order to prevent the decrease in yield have been approached from various aspects. For warpage prediction, silicon is generally treated as a homogeneous material, therefore it is described as showing no warpage behavior due to thermal loading. However, it was reported that warpage is actually caused by residual stress accumulated during grinding and polishing in order to make silicon wafer thinner, which make silicon wafer inhomogeneous through thickness direction. In this paper, warpage behavior of the single-side polished wafer at solder reflow temperature, the highest temperature in packaging processes, was measured using 3D digital image correlation (DIC) method. Mechanism was verified by measuring coefficient of thermal expansion (CTE) of both mirror-polished surface and rough surface.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.667-671
• /
• 2003

Tape cast laminar composites with alumina/zircon(reaction-bonded mullite/zirconia) as an inner layer and alumina/zirconia or mullite/zirconia as an outer layer have been fabricated by hot-pressing. The mechanical properties(hardness and Young's modulus) and microstructure of laminar composites were examined using a nanoindentation technique and Scanning Electron Microscopy (SEM), respectively. The indentation load-displacement curve revealed the existence of residual stress in laminar composites.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1125-1131
• /
• 1996

Ca or Sr-doped $PrMnO_3$ were prepared for cathode material of solid oxide fuel cell. The characteristics such as the electrical conductivity and the cathodic overpotential were investigated as to doping contents. Also the reactivity with yttria stabilized zirconia of electrolyte, and the thermal expansion coefficient were studied. The prepared perovskite powder had the mean particle size of $2{\sim}5{\mu}m$, and the particle size and the surface area was out of relation to the doping content. When Ca doping amount of electrode material was 30mol%, the electrical conductivity was the highest value of $266S{\cdot}cm^{-1}$ at $1000^{\circ}C$, and also the polarization characteristics showed the best property. The reactivity between YSZ and Ca-doped $PrMnO_3$ at $1200^{\circ}C$ for 100hours was lower than that between YSZ and Sr-doped $PrMnO_3$. The thermal expansion coefficient of $Pr_{0.7}Ca_{0.3}MnO_3$ was $1.19{\times}10^{-5}K^{-1}$ in the temperature range of $300{\sim}1000^{\circ}C$, and this value was similar to that of YSZ, $1.15{\times}10^{-5}K^{-1}$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1257-1262
• /
• 2008

A long-distance remote sensing of temperature and current based on a fiber Bragg grating (FBG) is proposed and demonstrated. The thermal expanding effect of the epoxy and the Er-doped fiber ring laser (EFRL) are applied to the sensor system to enhance the temperature and current sensitivity. An EFRL with a 5 km-single-mode fiber and a FBG shows a high extinction ratio of more than 60 dB and a low power fluctuation of less than 1 dB. The metal wires are used to supply the current to the sensors. When the NOA65 puts on the FBG as a thermal expanding material, the temperature and current sensitivity of the lasing wavelength shift are about $30\;pm/^{\circ}C$ and 3pm/mA, respectively. The proposed sensing scheme is useful for measurement of current or temperature at a distant object of more than several km.

• 한국전기화학회:학술대회논문집
• /
• 2002.07a
• /
• pp.117-122
• /
• 2002

고체산화물 연료전지의 구성요소인 양극(공기극)을 GNP와 Pechini 법을 이용하여 $(La{1-x}Sr_x)MnO_3$ 양극을 합성하여 합성한 분말의 특성과 단위전지로 사용하기 위한 조건에서의 특성을 측정하였다. GNP로 합성한 분말의 경우 직접 $(LaSr)MnO_3$ 단일 결정상을 얻을 수 있었으나, Pechini 법으로 합성한 분말의 경우는 비정질이었다. 또한 각각의 방법으로 합성한 분말의 입자형태는 구형이었고 1차상 입자크기는 GNP가 40nm, Pechini, 법으로 합성한 경우 20nm 정도의 크기를 갖고 있었다. GNP로 합성한 분말의 입자크기와 비표면적의 경우 glycine의 첨가량이 증가함에 따라 입자크기는 감소하였으나 최적 glycine 첨가량은 2.0mole 였고, 이 때 평균2차상의 입자크기는 $13.24{\mu}m$로 agglomeration 되어있었다. 최적 cathode조성은 GNP법으로 합성한 $(La_{0.9}Sr_{0.1}MnO_3$로서 가능하였고, 이 조성에서의 열팽창계수는 $9.89\times10^{-6}/^{\circ}C$이고, 전기전도도($1200^{\circ}C$에서 2시간소결)는 110 S/cm을 나타내었다.