• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.247-254
• /
• 2014

Strain properties of concrete member which acts as an important factor in the stability of the concrete structure in the event of fire, significantly affected the characteristics of the coarse aggregate, which accounts for most of the volume. For this reason, there are many studies on concrete using artificial lightweight aggregate which has smaller thermal expansion deformation than granite coarse aggregate. But the research is mostly limited on concrete using clay-based lightweight aggregate. Therefore, in this study, the high temperature compressive strength and elastic modulus, thermal strain and total strain, high temperature creep strain of concrete was evaluated. As a result, remaining rate of high-temperature strength of concrete using lightweight aggregate is higher than concrete with general aggregate and it is determined to be advantageous in terms of structural safety and ensuring high-temperature strength from the result of the total strain by loading and strain of thermal expansion. In addition, in the case of high-temperature creep, concrete shrinkage is increased by rising loading and temperature regardless of the type of aggregate, and concrete using lightweight aggregate shows bigger shrinkage than concrete with a granite-based aggregate. From this result, it is determined to require additional consideration on a high temperature creep strain in case of maintaining high temperature like as duration of a fire although concrete using light weight aggregate is an advantage in reducing the thermal expansion strain of the fire.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.334-339
• /
• 2004

Microstructures and mechanical properties of SPSed monolithic HAp, HAp-Ag, and HAp-ZrO$_2$sintered bodies were investigated by the XRD, SEM, and TEM techniques. The nano-sized HAp powders were successfully synthesized by precipitation of Ca(NO$_3$)$_2$4$H_2O$ and (NH$_4$)HPO$_4$solution. In the HAp-Ag composite, the shrinkage cavities were observed at the interfaces between HAp and large sized Ag particles due to the mismatch of their thermal expansion coefficients. However, no found the defect at the interfaces between HAp and fine-sized Ag particles. In the HAp-ZrO$_2$composite. nano-sized ZrO$_2$particles were almost dispersed at the grain boundaries of HAp phase. The fracture toughness of HAp-Ag and HAp-ZrO$_2$ composites were increased due to the plastic deformation and phase transformation mechanisms of the dispersed fine Ag and ZrO$_2$phase in the HAp matrix, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.1074-1079
• /
• 1996

Physicochemical characteristics of pigment separated from cockle shell were studied. Pigment on the cockle shell was peeled with distilled water, and soaked in 4% TCA solution for 30 minutes and filtered. Filtrate was washed 3 times with distilled water and Iyophilized. Dried pigment was dissolved with 2N NaOH solution and preparative TLC with 2N NaOH : acetone(1 : 1). UV/vis spectrum of pigment separated from cockle shell and melanin as standard was same one peak at UV area and λ$_{max}$was 226nm. Dissolved property of pigment was same as that of melanin. Pigment was not ommochrome but like melanin, because it was insoluble in formic acid, whitening in $H_2O_2, $ and pattern of UV-spectrum was same as melanin. Pigment separated from cockle shell was stable at high temperatures. In thermal treatment at $70^{\circ}C, $ $80^{\circ}C, $ $90^{\circ}C$ and $100^{\circ}C$ for 8 hours, retention ratio of pigment separated from cockle shell were 95.0%, 93.3%, 90.8% and 87.6%, respectively.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.769-777
• /
• 2003

The strengthening of concrete structures in situ with externally bonded carbon fiber is increasingly being used for repair and rehabilitation of existing structures. Because carbon fiber is attractive for this application due to its good tensile strength, resistances to corrosion, and low weight. Generally bond strength and behavior between concrete and carbon fiber mesh(CFM) is very important, because of enhancing bond of CFM. Therefore if bond strength is sufficient, it will be expect to enhance reinforcement effect. Unless sufficient, expect not to enhance reinforcement effect, because of occuring bond failure between concrete and CFM. In this study, the bond strength and load-displacement response of CFM to the concrete by the direct pull-out test(the tensile-shear test method) were investigated using the experiment and the finite element method analysis with ABAQUS. The key variables of the experiment are the location of clip, number of clips and thickness of cover mortar. The general results indicate that the clip anchorage technique for increasing bond strength with CFM appear to be effective to maintain the good post-failure behavior.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.2
• /
• pp.55-61
• /
• 2010

The device with tantalum silicide heater were bonded by Ag paste and Au SBB(Stud Bump Bonding) onto the Au coated substrate. The shear test after Au ABB and the thermal performance under current stressing were measured. The optimum condition of Au SBB was determined by fractured surface after die shear test and $350^{\circ}C$ for substrate, $250^{\circ}C$ for die during flip chip bonding with bonding load of about 300 g/bump. With applying 5W through heater on the device, the maximum temperature with Ag paste bonding was about $50^{\circ}C$. That with Au SBB on Au coated Si substrate showed $64^{\circ}C$. The difference of maximum temperatures is only $14^{\circ}C$, even though the difference of contact area between Ag paste bonding and Au SBB is by about 300 times and the simulation showed that the contact resistance might be one of the reasons.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.70-81
• /
• 2009

Statement of problem: The position and length of cantilever influence on the stress distribution of implants, superstructure and bone. In edentulous mandible, implant-supported cantilever prostheses that based 4 or 6 implants between mental foramens has been attempted. Excessive bite force loaded at cantilever prosthesis causes bone resorption and breakage of superstructure prosthesis around posterior implants. To complement the cantilever length of conventional prosthesis, In 1992, (McCartney) introduced "cantilever-rest-implant" and Malo reported "All-on-Four" in 2003. Purpose: Analyze and compare the stress distribution of conventional cantilever prostheses with rest implant and All-on-$Four^{TM}$ implant prostheses. Material and method: The external loads(300 N vertically, 75 N horizontally) are applied to first molar area. The stress value, stress distribution and aspect of stress dispersion are analyzed by three-dimensional finite element analysis program, ANSYS ver. 10.0. Results: 1. The rest implant and "All-on-Four" implant system are superior to conventional cantilever prostheses to reduce stress on the bone and the superstructure around implants. 2. The rest implant was of the greatest advantage to stress distribution on bone, implant and superstructure. 3. With same number of implants, distally tilted implants are preferred to conventional cantilever prostheses for reducing the length of cantilever.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.448-452
• /
• 2004

Trauma from occlusion(TFO) is injury to the periodontal tissue as a result of occlusal forces. Mobility is a common clinical sign of occlusal trauma. In acute occlusal trauma, this may be accomanied by pain, tenderness to percussion, thermal sensitivity, and pathologic tooth migration. Chronic occlusal trauma may be marked by excessive wear and gingival recession. Radiographic finding include a widened periodontal ligament space, radiolucence and condensation of the alveolar bone and root resorption. TFO is related to the pathogenesis of periodontal disease. It can cause increased tooth mobility TFO itself does not initate or aggravate marginal gingivitis or initiate periodontal pockets. Active trauma can accelerate bone loss, pocket formation and gingival recession depending on the presence of local irritants and inflammation. Gingival recession associated with occlusal forces includes traumatic crescent, McCall's festoon and Stillman's cleft. TFO plays a minor role in the pathogenesis of early to moderate periodontitis. A 5-year-old male visited Yonsei University Pedodontics clinic with a chief complaint about gingival recession. Mobility, excessive wear, gingival recession were detected by clinical exam on the both mandibular deciduous ca nine. On the radiographic view, vertical alveolar bone loss was observed on both mandibular deciduous canine.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.93-99
• /
• 2016

In this paper, we investigated the mechanical and electrical reliability of silver nanowire (AgNW) films. In particular, the durability and reliability of AgNW films were studied when the AgNW film was subjected to the bending deformation under current flow. The electrical durability of AgNW was evaluated by observing changes in heat generation and current density occurring in AgNW through voltage and current tests. The AgNW film showed a constant resistance change up to a bending radius of 2 mm and 200,000 cycles in the bending fatigue tests. The over-coating layer has an effect of improving the durability of the AgNW film. In the case of AgNW with the over-coating layer, heat was uniformly dissipated on the surface of AgNW film, whereas in the case of AgNW film without the over-coating layer, heat was generated locally. In the bending test under the current flow, the current density of the AgNW film was continuously decreased up to 52.4%. During bending, the AgNW was deformed due to mechanical deformation such as tensile, bending and sliding of the AgNW, consequently contact resistance of the AgNW was increased, leading to a electrical breakdown of AgNW by Joule heating. It was found that the application of the over-coating layer can improve the electrical and mechanical reliability of the AgNW film.

• Journal of the Korean Ceramic Society
• /
• v.41 no.3
• /
• pp.221-228
• /
• 2004

Basic properties of artificial lightweight aggregate by using waste dusts and strength properties of LWA concrete were studied. Bulk specific gravity and water absorption of artificial lightweight aggregates varied from 1.4 to 1.7 and 13 to 16%, respectively. Crushing ratio of artificial lightweight aggregate was above 10% higher than that of crushed stone or gravel. As a result of TCLP leaching test, the leaching amount of tested heavy metal element was below the leaching standard of hazardous material. Slump, compressive strength and stress-strain properties of LWA concrete made of artificial lightweight aggregate were tested. Concrete samples derived from LWA substitution ratio of 30 vol% and W/C ratio of 45 wt% showed the best properties overall. Thermal insulation and sound insulation characteristics of light weight concrete panel with the optimum concrete proportion were tested. Average overall heat transmission of 3.293W/㎡$^{\circ}C$ was observed. It was higher by about 15% than those of normal concrete made by crushed stone. Sound transmission loss of 50.9 ㏈ in frequency of 500 ㎐ was observed. It was higher by about 13% than standard transmission loss.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.4
• /
• pp.376-383
• /
• 1988

The effect of dietary methionine level on lipid peroxidation of rats was studied. Rats were fed vitamin E- selenium- deficient diet or diet supplemented with various levels (0.3, 0.6, 0.9%) of methionine. In rat fed MF diet, body weight gain and feed efficiency ratio were decreased compared with those of control rats, but reversed by supplementation with 0.3 and 0.6% methionine. Lipid peroxide levels in plasma and hepatic mitochondrial fraction of MF group rats were significantly higher than those of control rats. However, supplementation with 0.6% methionine modified this increment. GSH-Px activity was decrased to varying degrees in erythrocyte and hepatic mitochondrial fraction from rats fed MF diet. Methionine supplementation did not affect induction of this enzyme activity. Examination of hepatocytes by electronmicroscopy showed that Influence of vitamin E, selenium, and methionine deficiency was mainly characterized by lipid droplets, swollen mitochondria and microvilli destruction. Supplementation with various levels of dietary methionine modified these changes to some extent. The results of this experiment indicated that MF diet causes significant change in lipid peroxide level, GSH-Px activity and morphology of rats which these changes may lessen by supplementation with 0.6% methionine.