• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.160-165
• /
• 1996

중수로형 원전에서 일차측 냉각수를 순환시키는 주연수송펌프가 정상운전중 갑자기 정지하는 사고를 강제순환 상실사고라 한다. 강제순환 상실사고는 주열수송계통을 과도압력상태로 만들며, 일반적으로 펌프에 공급되는 IV등급전원 상실사고와 기계적 손상에 의한 주열수송펌프 고착사고로 분류할 수 있다. 본 논문에서는 강제순환 상실사고에 대하여 중수로계통설계의 열수력 해석코드인 SOPHT를 이용하여 주열수송계통의 과도압력상태를 해석하였다. 카나다 원자력 규제위원회(AECB)의 과압 방지조건인 R-77 요구조건에 적절한 유효트립변수를 결정하기 위한 해석이 수행되었으며, 증기발생기 오염상태와 액체방출밸브 작동여부가 고도압력상태에 미치는 영향을 고찰하여 보수적 조건을 제시하였다. 또한 위와같이 결정된 보수적 조건을 근거로 ASME 코드에 명시된 과압 한계치에 대한 만족여부와 과도압력상태에 따른 주열수송계통의 열수력학적 거동을 고찰하여 보았다. 해석결과, 강제순환상실사고시 주열수송계통은 R-77 요구조건에 적합한 원자로트립변수에 따라 안정화되었으며, 계통의 최대압력은 ASME 코드가 규정한 한계치내에 있음을 알 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.124-132
• /
• 1987

In this paper, a new Open and Closed Loop Alternation(OCLA) frequency synthesizer is developed to eliminate a frequency error occurring in the transition state of a frequency hopping. This frequency synthesizer consists of a phase comparator(PC), two low pass filters(LPF), two voltage controlled oscillators(VCO), switching elements, a programmable divider and frequency hopping controller, and the stabilized output frequency can be obtained by switching performance. In addigion, it can be found that the characteristic of its circuit construction makes it easy to attach an external circuitry to the open loop.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1190-1197
• /
• 2006

We have evaluated the structural stability of a platform screen door due to train wind pressure. The platform screen door was installed at the ground and underground station and had 65 meters in length. Also, the platform screen door was a safety device because it was placed between the train and the platform. The finite element analysis was used to calculate the stresses and deflections of platform screen door caused by wind pressure using ANSYS 10.0. Quasi-static analysis was introduced to save calculating time and check quickly structural performances when compared to those of transient analysis. The results show that structural stability of the platform screen door under train wind pressure is proven and quasi-static analysis can quickly check the structural integrity of platform screen door.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.14 no.2
• /
• pp.87-97
• /
• 1985

Experimental measurements of the heat flux to a upward impinging water jet on high heated test surface were obtained in the transition and film boiling regimes. Test variables were nozzle outlet velocity, subcooled water temperature and height of supplementary water. Boiling curve of this investigation is similar to a pool boiling curve, but it has one or two cap-shaped peaks in the transition regime. In the film boiling regime, the heat transfer rates are increased along with the increment of nozzle outlet velocity and subcooled temperature. There is optimum height of supplementary water for the augmentation of heat transfer Generalized correlations of boiling heat transfer are presented for maximum heat flux, minimum heat flux and $q_c$ at each supplementary height.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.701-706
• /
• 2015

In this study, experimental and computer simulation results are compared and analyzed. Three-dimensional (3D) fabricated matrices from an MJM 3D printer were joined with poly-acetate thermoplastic polymers using a diode laser. A power range of 5-7 W was used to irradiate the boundary of two polymers. The heated polymers flowed into the matrices of the 3D fabricated structure, and reliable mechanical joining was achieved. Computer simulation showed the temperature distribution in the polymers, and flow direction was estimated based on the flux and temperature information. It was found that the more than the minimum energy threshold was required to effectively join the polymers and that two scans at low-speed were more effective than four scans at high speed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.62-73
• /
• 2016

The variation of groundwater by wave, tide and precipitation conditions is closely related to the vegetation environment at the natural vegetation and sandy based beach, and it has a significant impact on the vegetation development and ground stabilization. In this study, the water temperature, electrical conductivity, and pressure were monitored at five observational stations normal to the Jinu-do(Island) shoreline of Nakdong river estuary from March 2012 to September 2014 (approximately 799 days) with the aim of measuring the variation in groundwater-table characteristics. The purpose of the study was to identify factors (tide, wave etc.) affecting groundwater-table variation using time series and correlation analysis, and to record spatial variations in the groundwater level and electrical conductivity as a result of storm events. The observational station in the intertidal zone was strongly affected by wave period and tide level. During the storm period, the groundwater-table and electrical conductivity were stabilized at the edge of sand dunes, vegetation, and areas of transition between freshwater and seawater.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.27-35
• /
• 2014

The existing flow regime map on mixed convection in vertical cylinders was investigated through an analysis of original literatures and its re-formation. The original literatures related to the existing map were reviewed. Using the investigated data and heat transfer correlations, the map was redrawn independently, and compared with the existing map. The redrawn map showed that mixed convection regime was not curved lines but straight lines and the transition regime was unable to be reproduced. Unlike the existing map with a little data, there are lots of data in the redrawn map. The reviews revealed that the existing map used the data selectively among the experimental and theoretical results, and a detailed description for lines forming mixed convection and transition regime was not provided. While considerable studies on mixed convection have been performed since that of Metais and Eckert, the existing map has still been used as the best method to distinguish natural, forced and mixed convection regime.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.1
• /
• pp.13-20
• /
• 2005

Since High Tensile Steel has been widely used to thin plate on the steel structure and marine structure, It has increased possibility of buckling. Especially, initial deflection of ship structure is mainly caused by heat processing of welding or cutting etc. This initial deflection has negative effect to thin plate, which would incur a complicated nonlinear behavior accompanied with secondary buckling. If idealized initial deflection is considered in early marine structure design of secondary buckling, accuracy and reliability will be improved considerably. The measurement data of initial deflection from experiment is applied to finite element series analysis. For FEA(ANSYS), Applied nonlinear buckling analysis is used by Newton-Raphson method & Arc-length method included in this program.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.49-59
• /
• 2005

An adaptive hybrid beamformer is proposed to improve the reception performance of the advanced television system committee (ATSC) digital television (DTV) in a mobile environment. Dynamic multipaths and Doppler shifts severely degrade the reception performance of the ATSC DTV receiver. Accordingly, a hybrid beamformer, called a Capon and least mean square (CLMS) beamformer, is presented that uses direction of arrival (DOA) information and the least mean square (LMS) beamforming algorithm. The proposed CLMS algerian efficiently removes dynamic multipaths and compensates for the phase distortion caused by Doppler shifts in mobile receivers. After the CLMS beamformer is operated, the subsequent use of an equalizer removes any residual multipath effects, thereby significantly improving the performance of DTV receivers. The performances of the proposed CLMS, Capon, and LMS beamformersare compared based on computer simulations. In addition, the overall performance of the CLMS beamformer followed by an equalizer is also considered.

• The Korean Journal of Mycology
• /
• v.23 no.2 s.73
• /
• pp.161-175
• /
• 1995

Meju is a raw material used to make Korean soy sauce (Kanjang) and soybean paste (Doenjang), both of them rich in plant protein. The twenty-nine fungal and a bacterial species were identified from twenty-three traditionally homemade meju cakes. Out of them, only a few species were found to be involved in the actual fermentation process of meju; The other species were contaminants during the improper subprocesses of meju fermentation. The fungal floral successions were observed to be related to two physical and biochemical changes of meju cakes during meju fermentation: drying and heat releasing processes. The zygomycetous fungi were first observed to exist mainly during the first stage. Scopulariopsis brevicaulis was observed to grow on the surface of meju cakes and then to coexist with Bacillus megatrium in the inner part of meju cakes during the second stage. Based on the biochemical tests, the proteases secreted by the different microorganisms were involved in the degradation of soybean proteins with a mutual relationship. Also, zygomycetous fungi were speculated to be important microorganisms for inducing the second stage in the traditional Korean homemade meju.