• Journal of Life Science
• /
• v.20 no.9
• /
• pp.1339-1344
• /
• 2010

In order to produce environmental-friendly fermented compost, a cattle manure-sawdust compost (antifungal compost) was developed by inoculation of B. licheniformis KJ-9 to cattle manure-sawdust. The thermal stability of the antifungal substance produced by B. licheniformis KJ-9 maintained more than 60% antifungal activity with heat treatment at $100^{\circ}C$ for 10 min, and the optimum pH of antifungal activity of the substance was 7.0. In a pot experiment with red pepper, the antifungal compost increased 1.5~2 times in leaf number and stem and root growth rate compared to those of commercial compost. Also, the diameter of stems increased 1.5-3 times in the antifungal compost treated group. The amount of microbes increased markedly in soil supplemented with antifungal compost compared to the control. In the field experiment for cultivation of garlic and Perilla japonica, the growth of both crops was significantly enhanced in the field treated with antifungal compost as compared to the commercial compost.

• Korean Journal of Food Science and Technology
• /
• v.24 no.1
• /
• pp.42-48
• /
• 1992

The rate and extent of coagulation of milk using fast acidification with 0.1 N HCl were monitored by changes in viscosity and turbidity at various temperatures and pH. Also the gelation rate of milk using slow acidification with D-glucono-${\delta}$-lactone was measured in a small strain rheological scanner. Coagulation of milk casein occurred in a specific pH range and was accompanied by an abrupt increase in viscosity at pH 5.0. Acid coagulation rate was enhanced by increasing temperature from $20^{\circ}C{\sim}50^{\circ}C$, and the maximum rate was shown around pH 5.0. The addition of salt ($CaCl_{2}$) reduced the maximum coagulation rate at all temperature ranges and shifted the pH ranges for maximum coagulation rate and the onset pH of coagulation. The onset of gelation and the rate of network formation during slow acidification were facilitated by Cl ion, but suppressed by SCN-ion, as indicated by the rate of rigidity development. The susceptibility to syneresis was greater in the gel made at lower temperature and around pH 4.6, while preheated milk at $90^{\circ}C$ for 5 min prior to acidification showed the same syneresis profile at all heating temperatures ($60{\sim}90^{\circ}C$).

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.314-319
• /
• 2013

In this study, nitrogen doped $TiO_2$ ($N-TiO_2$) coated on an activated carbon pellet (ACP) was prepared using sol-gel and the solid state heat treatment of urea to improve the removal property of volatile organic compounds (VOCs). To explore the visible light photocatalytic activity of the ACP under the light emitting diods (LED), the removal property of benzene gas was characterized by gas chromatography. The SEM and BET results show that the increment of titanium tetra isopropoxide contents leads to the increased $TiO_2$ coating amount of ACP surface and decreased specific surface area. From the results of benzene gas removal, the breakthrough time of ACP10 increased about 2 times compared to that of the ACP. The improved performance was attributed to the $N-TiO_2$ coating on ACP surface, which could be more effective to remove benzene gas under the condition of LED lamp.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1382-1388
• /
• 2008

Antimicrobial activities of green tea extracts used for coarse tea were investigated by disc diffusion method using eight different bacteria. Among the green tea extracts, the 70% ethanol extract demonstrated the strongest antimicrobial activities against Vibrio parahemolyticus (V. parahemolyticus) and Staphylococcus aureus (S. aureus) and thus was further fractionated. Among these fractions, the ethyl acetate fraction showed the strongest antimicrobial activities against V. parahemolyticus, S. aureus, Bacillus subtilis (B. subtilis), and Streptococcus mutans (S. mutans). These activities exceeded that of all extracts and fractions tested in this study. Interestingly, although green tea extracts showed significant antimicrobial activity against Micrococcus luteus (M. luteus), once fractionated, the ethyl acetate fraction did not show any antimicrobial activity against M. luteus. MICs of the ethyl acetate fraction were $5\;\;{\mu}L$/disc against B. subtilis and $3\;{\mu}L$/disc against S. aureus, S. mutans and V. parahaemolyticus. 90% inhibition of B. subtilis was observed with 0.05% ethyl acetate fraction but S. mutans needed over 0.1% ethyl acetate fraction to exhibit the same inhibition as B. subtilis. Antimicrobial activities of ethyl acetate fractions were reduced around 10% by thermal treatment at $121^{\circ}C$ for 20 min. All the results suggest that the 70% ethanol extract as well as the ethyl acetate fraction from green tea used for coarse tea could be further developed into a natural antimicrobial agent.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.137-143
• /
• 2005

Oriental melons hold at $38^{\circ}C$ for 48 hours before storage increased their soluble solid, titratable acidity, vitamin C contents and ${\alpha}$-tocopherol activity. These heat treated oriental melons maintained lower production of carbon dioxide, ethylene and acetaldehyde and loss of fresh weight than untreated them, called control, during $3^{\circ}C$ MA storage. After 39 days in storage, the last day of storage, visual quality and internal quality, such as firmness, soluble solid, titratable acidity, vitamin C and ${\alpha}$-tocopherol activity, showed higher in heat treated oriental melons. Especially, Ion leakage of flesh, index of chilling injury, increased remarkably in control, so that heat treatment had to alleviate chilling injury in oriental melon. Moreover, while Alternaria rot was shown in control plot after 25 days in $3^{\circ}C$ MA storage, oriental melons treated heat were not appeared any decomposition after 39 days in $3^{\circ}C$ MA storage. As storage life of oriental melon was calculated by regression equation between visual quality and days in storage, that was longer 8 days in heat treated than control. Consequently, heat treatment that was mild, $38^{\circ}C$ and long period, 48 hours, executed before storage, sterilized surface alleviated chilling injury and lengthened storage life in oriental melons.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.737-743
• /
• 2000

Polyquinonediimines (PQDI) which have stable structure on heat and contains mono-azobenzene in the side chain were synthesized by means of condensation polymerization under TiCl$_4$. The synthesized monomers and polymers were identified by FT-IR, $^1$H-NMR, and elementary analysis. Especially, PQDI was comfirmed by the double-bonding peak of >C=N appeared near 1625 $cm^{-1}$ / by means of FT-IR spectrum. PQDI containing mono-azobenzene group in both side chains wat not soluble in non-polar solvents at all but partially soluble in the polar solvents having small dielectric constant, and dissolved in the strong acid such as sulfuric acid and $CH_3$SO$_3$H. Molecular weight distribution of PQDI measured by GPC showed 1.74. It was confirmed through X-ray diffraction analysis that the polymer was partially crystalline at the low angle region, but amorphous after heat treatment at 1$25^{\circ}C$. The glass transition temperature (T$_{g}$ ) of synthesized polymer was measured as 1$25^{\circ}C$ by differential scanning calorimetry. The SHG value for $\chi$$^{(2)}$ after poling at 1$25^{\circ}C$ was 8.6 pm/V (λ=1.542 ${\mu}{\textrm}{m}$). The SHG value slowly decreased with time from the start but appeared temporal stability after 100 hours.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.103-111
• /
• 2016

Li-bearing hectorite, one member of trioctahedral smectite, occurred large in quantity and confirmed in Turkey western sedimentary boron deposit. Li-bearing hectorite attracted a particular attention because it is one of potential lithium resources. There have been no consensus for the change of hectorite due to heat and acid treatment although it is very important to use in industrial application. In this study, we examined changes of hectorite after heat and acid treatment as well as acid treatement followed by heating. We used clay ores collected in Bigadic deposit, which contained the highest $Li_2O$ content in Turkey boron deposits. Hectorite showed a strong endothermic reaction at $84^{\circ}C$ due to dehydration of absorbed water and interlayer water and a weak endothermic reaction above $600^{\circ}C$ owing to dehydration of crystallization water. The first endothermic reaction accompanied a large weight loss about 6%. Hectorite decomposed into enstatite, cristobalite and amorphous Fe material at $762^{\circ}C$ with exothermic reaction. When hectorite reacted with 3 kinds of 0.1 M acid during 1 hours, it had a good dissolution efficiency with $H_2SO_4{\geq}HCl$ > $HNO_3$ in order.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.290-293
• /
• 2001

The SrBi$_2$Nb$_2$O$_{9}$ (SBN) thin films were deposited on p-type(100) Si substrates by rf magnetron sputtering to confirm the Possibility of Pt/SBN/Si structure for the application of nondestructive read out ferroelectric random access memory (NDRO- FRAM). The SBN thin films were deposited by co-sputtering method with Sr$_2$Nb$_2$O$_{7}$ (SNO) and Bi$_2$O$_3$ ceramic targets. The SBN thin films deposited at room temperature were annealed at $700^{\circ}C$ for 1hr in $O_2$ ambient. The structural and electrical properties of SBN with different power ratios of targets were measured by x-ray diffraction(XRD), scanning electron microscopy(SEM), capacitance-voltage(C-V), and current-voltage(I-V). The C-V curves of the SBN films showed hysteresis curves of a clockwise rotation showing ferroelectricity. When the Power ratio of the SNO/Bi$_2$O$_3$ targets was 120 W/100 W, the SBN thin films had excellent electrical properties. The memory window of SBN thin film was 1.8 V-6.3 V at applied voltage of 3 V-9 V and the leakage current density was 1.5 $\times$ 10$^{-7}$ A/$\textrm{cm}^2$ at applied voltage of 5 V The composition of SBN thin films was analysed by electron probe X-ray micro analyzer(EPMA) and the atomic ratio of Sr:Bi:Nb with pawer ratio of 120 W/100 W was 1:3:2.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.835-841
• /
• 1995

The deposition properties of Si$_3$N$_4$ deposited by low pressure chemical vapor deposition were studied to evaluate Si$_3$N$_4$as part of multi-layer coatings for anti-oxidation and anti-wear coating of graphite in the propellant-burning environment. Si$_3$N$_4$was deposited on the pack-SiC coated graphite and the tendencies of deposition rate and surface morphology changes with temperatures and reaction gas ratios were investigated. In low deposition temperatures the deposition rate increased tilth increasing temperature but in high temperatures the deposition rate decreased with increasing temperature. The grain size of Si$_3$N$_4$decreased with increasing temperature. In condition that the range of reaction gas ratios is 20$\leq$NH$_3$/SiH$_4$$\leq$40, the deposition rate and surface morphology did not change. The Si$_3$N$_4$deposited at 800~130$0^{\circ}C$ was amorphous, and by post-annealing at 130$0^{\circ}C$ in a $N_2$ambient, the Si$_3$N$_4$crystalized.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.133-137
• /
• 2001

The method to make glass is tried first thing in domestic study for glasses lens. Tg of glass KzFSl was measured by DSC experiment and press method of glass of meniscus shape was studied for minimize the cost. Tg was increased $483^{\circ}C$ to $501^{\circ}C$ with increasing heating rate $2^{\circ}C/min$ to $20^{\circ}C/min$. It shows Arrhenius temperature dependence and the activation energy of Tg is ${\Delta}E$=409 kJ/mole(4.25eV) by using Ozawa method and Tg is near $480^{\circ}C$. The melt of KzFSl powder was poured to concave cast stainless and pressed convex cast stainless. The quenched glass was slow cooled with cooling rate $0.25^{\circ}C/min$ in temperature range $520{\sim}430^{\circ}C$. The glass was made without strain. It has meniscus shape and same size to commercial glasses lens.