• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.484-488
• /
• 2011

Technologically advanced railway countries had a unique ability to design, test and evaluation systems for development of High-speed train system. To evaluate the performance of the train system in Korea for the development of advanced measurement technology and systems are needed. In this study, the Overall Measuring System(OMS) is going to be established to efficiently verify the performance, stability and reliability of the train system and the components, and verify of the maximum speed though an on-line test. OMS consist of vehicle measuring system, pantograph measuring system, video monitoring system and monitoring room was constructed for the overall measuring system and monitoring system. The results of this study were expected to contribute to technical improvement for evaluation of train system.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.138-141
• /
• 2010

본 논문에서는 고안전성 연산제어 장치의 열차제어시스템에 대한 적용성을 평가하여 그 결과를 분석하였다. 고안전성 연산제어 장치의 적용대상으로 열차제어시스템에서 가장 대표적인 지상 ATP 시스템을 선정하였다. 지상 ATP(Automatic Train Protection) 시스템은 다수의 차상 ATP 시스템과 통신하여 각 열차의 위치를 확인하고, 각 열차마다 안전 운행에 필요한 정보이동허가, 제한 속도 등의 열차정보를 전송하는 열차제어시스템의 하나이다. 적용대상 열차제어시스템(지상 ATP)의 고안전성 연산처리 장치의 평가항목으로 입력처리시간, 보팅 성공률, 보팅 용량, 최대 입력처리 개수를 정하였으며, DSV보드 LVDS 전송성능, DSV 메모리 공유 및 보팅성능, 최대 입력처리성능 및 보팅성공률을 시험하여 고안전성 연산처리장치의 적용성을 평가였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2206-2207
• /
• 2011

컴퓨터 통신기술 발달에 따라 철도의 열차제어에 대한 기술도 기존의 궤도회로기반에서 무선통신기반으로 변화되고 있다. 국내에서도 도시철도용 무선통신기반 열차제어시스템의 개발이 진행됨에 따른 개발품의 성능평가에 대한 관심이 높아지고 있다. 따라서 본 논문에서는 새롭게 개발되는 무선통신기반 열차제어시스템의 성능평가를 위해 성능시험 항목의 선정과 현장에서의 시험을 위한 시험선로 지상 및 차상인프라 구축에 대한 기본적인 검토를 기반으로 시험 및 성능평가 시행의 종합기본계획을 수립하는 검토를 수행하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.545-551
• /
• 2016

In this study, we evaluate the braking performance of an urban railway vehicle to verify its basic safety condition. The braking performance evaluation methods, deceleration measurement and braked weight percentage, were compared for trains with different numbers of cars, in order to assess the advantages of each method and their compatibility. With a probabilistic braking model, the effect of the adhesion coefficient distribution was analyzed in accordance with the train composition. A train with many cars has a narrower deceleration distribution width than one with few cars. The braked weight percentage method is expected to be useful in the design of train signal systems, because it allows the braking distance to be calculated for various initial brake velocities. The deceleration distribution model and its results are expected to be useful as a basis for precise train signal design.

• Journal of the Korean Society for Railway
• /
• v.7 no.2
• /
• pp.120-124
• /
• 2004

Computer aided simulation is an essential part in planning, design, and operation of railway systems. To determine the adequate performance and specification of railway system, it is necessary to calculate train performances such as distance, speed, power during train's running. This paper presents result of train performance simulation using the program that developed for Korea high speed train. To verify result of simulation, we have compared that with experiment data.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.279-281
• /
• 2004

고속열차는 세계철도협회(UIC)에서 정의하기를 "시속 250km 이상으로 상업운행하는 열차" 라고 한다 새로이 건설된 고속선로에서 고속열차가 운행하는 국가는 일본(64년) 프랑스(81년) 독일(91년) 스페인(92년)과 지난 4월 1일 고속철도가 개통된 우리나라이다. (중략)

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1454-1460
• /
• 2006

This paper assesses communication performance using a roaming simulator when roaming occurs between onboard and ground wireless communication devices for communication based train control system (CBTC). Generally, CBTC is defined as the system regularly collecting location and speed data from each train, transmitting distance information to a train, and optimizing train speed according to train performance. When a train is moving, roaming is also performed to continuously transmit and receive train control information between the ground controller and the train. To operate CBTC, packet loss rate should be less than 1%, roaming time less than 100ms during roaming. We developed a roaming simulator to check communication performance before installing ground and onboard equipments on actual wireless sections. The roaming simulator to be introduced in this paper is for roaming simulation before conducting CBTC field test, which is the project to develop Urban Rail Signaling System Standards, being conducted in KRRI. The simulation consists of one onboard wireless communication device and three ground wireless communication devices, and the roaming simulator estimate packet loss rate occurring during roaming process of the two devices. Therefore, if you use the roaming simulator before the field test, you can predict various problems to occur in actual environment and reduce time, cost and people necessary to resolve these problems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6949-6958
• /
• 2015

Radio based train control system performs train safe interval control by receiving in realtime the position information of trains driving in the control area of the wayside system and providing onboard system in each train with updated movement authority. The performance of the train control system is evaluated to calculate the minimum operation headway, which reflects the operation characteristics and the characteristics of the train as well as the interval control performance of the train control system. In this paper, we propose the operation headway calculation for radio based train control system and a new train interval control algorithm to improve the operation headway. The proposed headway calculation defines line headway and station headway by the estimation the safety margin distance reflecting the performance of the train control system. Furthermore the proposed Enhanced Train Interval Control(ETIC) algorithm defines a new movement authority including both distance and speed, and improves the train operation headway by using braking distance occurring inevitably in the preceding train. The proposed operation headway calculation is simulated with Korean Radio-based Train Control System(KRTCS) and the simulated result is compared to improved train interval control algorithm. According to the simulated results, the proposed operation headway calculation can be used as performance indicator for radio based train control system, and the improved train control algorithm can improve the line and station headway of the conventional radio based train control system.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.217-219
• /
• 2007

본 논문에서는 열차의 실제 노선 운행을 모의하여 구동 장치의 특성을 평가하고 에너지 절약에 대한 연구를 하였다. 이에 대하여 열차의 구동 에너지를 절약하기 위한 모터의 제어 방식과 제너레이터의 회생 에너지에 관한 연구를 선택하였다. 실제 대전 지하철의 노선 데이터를 이용하여 열차 주행 결과를 시뮬레이션 하였다. SVM (Space Vector Modulation) - DTC (Direct Torque Control)로 구현된 M-G Set으로 열차가 주행 시 모터에서 소비되는 에너지와 제동 시 제너레이터에서 발생되는 회생 에너지를 Simplorer 프로그램을 이용하여 시뮬레이션 하였다. 시뮬레이션 결과를 통해 열차의 소비 에너지와 회생 에너지를 연구한다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1254-1255
• /
• 2011

최근 무선통신기반 열차제어시스템의 국산화 개발이 진행 중에 있으며, 이동폐색 및 열차간격의 효율적인 제어를 위해서는 열차에 서 직접 열차의 이동위치와 속도를 정확하게 실시간으로 파악할 수 있어야 한다. 하지만 기존 철도시스템에서는 열차의 위치 및 속도확인을 위해 궤도회로와 타코메터를 이용하고 있으며, 효율적인 열차제어를 위해 지상설비의 도움없이 안전하고 정확한 열차위치정보의 확보가 필요하다. 따라서 본 논문에서는 위성항법수신기, 관성센서, 도플러레이더센서, 타코메터와 같이 열차에 탑재 가능한 위치 및 속도센서를 통합 적용하여 단독으로 열차 위치 및 속도파악이 가능한 차상기반 열차위치검지 장치를 구성하고, 한국형 틸팅열차 탑재시험을 통해 위치정확성을 평가하고 철도운영 환경에서의 적용성을 확인한다.