• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.1
• /
• pp.134-142
• /
• 2007

In this study the physico-chemical characteristics of solid waste and the thermagravimetric analysis of waste investigated. It was found that the combustible component, water and ash were 61%, 32%, 7% respectively. The amount of combustible component was much higher than those of others. It was shown that the total carbon and hydrogen of the waste 94% and the high heating value was 2897,883(Kcal/kg). The thermagravimetric analysis showed that the weight loss of wastes occurred as temperature increased, and the rate was higher in the temperature range of $300^{\circ}C$ to $500^{\circ}C$.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.341-342
• /
• 2008

• Resources Recycling
• /
• v.32 no.6
• /
• pp.25-33
• /
• 2023

With the growth of the battery industry, a rapid increase in the production and usage of lithium-ion batteries is expected, and in line with this, much interest and effort is being paid to recycle waste batteries, including production scrap. Although much effort has been made to recycle cathode material, much attention has begun to recycle anode material to secure the supply chain of critical minerals and improve recycling rates. The proximate analysis that measures the content of coal can be used to analyze graphite in anode material, but it cannot accurately analyze due to the interaction between the components of the black mass. Therefore, in this study, thermogravimetric analysis of each component of black mass was measured as the temperature increased up to 950℃ in an oxygen atmosphere. As a result, in the case of cathode material, no change in mass was measured other than a mass reduction of about 5% due to oxidation of the binder and conductive material. In the case of anode material, except for a mass reduction of about 2% due to the binder, all mass reduction were due to the graphite(fixed carbon). In addition, metal conductors (Al, Cu) were oxidized and their mass increased as the temperature increased. Thermal analysis results of mixed samples of cathode/anode show similar results to the predictive values that can be calculated through each cathode and anode analysis results.

• Rubber Technology
• /
• v.21 no.4
• /
• pp.189-195
• /
• 2020

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.116-119
• /
• 1993

고체연료의 연료특성을 완전히 파악하기는 어렵다. 하지만 기존의 알고있는 자료를 이용해서 고체연료의 연소특성을 예측할 수 있을 것이다. 그래서, 이미 어느 정도 알려져 있는 미분탄의 연소특성을 이용하여 폐기물의 연소특성을 예측하기 위해서 새로운 열중량 분석장치를 개발하게 되었으며, 여기에서는 그 개발절차 및 기초실험 결과를 실었다. 기초실험 결과 미소질량일 경우와 약간의 차이가 발견되었다. 그러나 그 개형은 기존의 자료들과 큰 차이가 없는 것으로 보여진다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.207-212
• /
• 2009

In this study, a thermal behavior of $PrCl_3$ as one of the lanthanide chlorides in LiCl-KCl molten salts was investigated in an oxidizing condition. First, a thermo-gravimetric analysis (TGA) of $PrCl_3$ was carried out by an injection of $O_2$ gas. Based on the results, an oxidation of $PrCl_3$ in the molten salts was performed by sparging $O_2$ gas with changing temperatures. According to the TGA data of $PrCl_3$, a dissociation of $PrCl_3$ occurred rapidly by about $380^{\circ}C$ and a conversion of $PrCl_3$ to $PrCl_3$ was completed at about $600^{\circ}C$. The thermal behavior of $PrCl_3$ in LiCl-KCl molten salts by sparging $O_2$ gas was similar to that of $PrCl_3$ in the TGA test, and PrOCl as a insoluble compound in the molten salts was precipitated into the bottom of the molten salts. A conversion of $PrCl_3$ to PrOCl in the molten salts occurred actively at a higher temperature than $650^{\circ}C$. And it would be possible to estimate a conversion status of $PrCl_3$ to PrOCl by measuring a $Cl_2$ concentration in a flue gas generated from an oxidation test of $PrCl_3$ in LiCl-KCl molten salts.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.421-424
• /
• 2011

Thermal Analyses are conducted to measure various factors of a liquid fuel required for numerical analysis. Thermal Analyses are divided into two different methods of TGA (Thermo Gravimetric Analysis) and DSC (Differential Scanning Calorimetry). Non-isothermal experimental results are analyzed using by TGA. The results are filtered by a Freeman Carroll method. At the same time, chemical parameters of unknown liquid fuel, activation temperature and reaction order are measured to 6128.2 K and 1.4, respectively. Furthermore, the parameters can be obtained by various mathematical methods. It is found that tha parameters depend on the processing method.

• Korean Journal of Materials Research
• /
• v.7 no.9
• /
• pp.738-743
• /
• 1997

PVC핏치의 제조 조건에 따른 물성 변화 및 산화 안정화에 영향을 미치는 공정 변수를 연구하기 위하여 열중량 분석을 하였다. 산소 분위기를 사용하여 안정화온도, 승온속도 및 가스의 유량을 변화시켜 조사하였다. 안정화 온도가 높아짐에 따라 무게증가를 나타내는 시간구간이 짧아지고 결합되는 산소의 양은 감소하는 경향을 나타내며, 29$0^{\circ}C$정도로 안정화 온도가 높은 경우에는 결합되는 산소의양이 최대점에 도달한 후 다시 감소하는 경향을 나타냈다. 승온속도가 빨라짐에 따라 결합되는 산소의양은 감소하는 경향을 나타내었으나, 가스의 유량은 본 연구에서 설정한 범위 내에서는 영향이 관찰되지 않았다. 핏치 입자 직경이 커짐에 따라 최대 무게증가 값은 감소하고 최대 무게증가를 나타내는 온도는 증가함을 알았다. 그리고, 안정화에 의한 무게증가가 클수록 PVC핏치의 탄소수율은 감소하는 경향이 나타났다.

• Journal of the Korean Society of Tobacco Science
• /
• v.3 no.2
• /
• pp.89-93
• /
• 1981

Some or the parameters affecting the thermal analysis of different types of ground tobacco have been discussed. The sample, Korean flue- cured and burley and Greek orient tobacco leaves were run in air at heating rate of $10^{\circ}$ and 20^{\circ}C$ per minute. The thermograms obtained were divided into four temperature zones. The effect of different heating rates on thermal degradation has been discussed At the lower heating rate the maxima of DTA curves in zone 3 and 4 were 25-$40^{\circ}C$ lower than that of the higher heating rate.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.296-300
• /
• 2011

In this work, various wood biomasses were used to determine the combustion characteristics for the fuel of cogeneration plant. Combustion characteristics of four types, i.e., (i) forest products, (ii) recycled wood, (iii) empty fruit bunch, and (iv) palm kernel shell, were examined via thermal gravimetric analyzer (TGA) in air atmosphere and coal was used as a comparison group. From the TGA results, the combustion of the wood biomass was occurred in the range of 280 to $420^{\circ}C$, which was lower than that of coal. Forest product showed the lowest activation energy (0.4 kJ/mol) compared to that of other wood biomasses (about 6 to 14 kJ/mol) and coal (64 kJ/mol). In addition, the reaction rate constant of the wood biomass was lower than that of coal. These results indicate the higher combustion initiation rate of wood biomass due to the high content of volatile matter, which had a low boiling point.