• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.77-81
• /
• 2013

The objective of this study is experimentally to investigate natural convective heat transfer characteristics of the ferrofluid for a concentric annuli under rotating magnetic field with variations of the revolution and the magnetic field strength. The rotating magnetic field was provided by induction motor with 6 poles and 3 phases and the revolution and the magnetic field strength were controlled by an inverter driver and a voltage meter, respectively. Temperatures of the inner pipe and the outer pipe in the tested concentric annuli were maintained at $30^{\circ}C$ and $25^{\circ}C$, respectively, during the test and the direction of the rotating magnetic field was a counterclockwise. As a result, the natural convective heat transfer characteristics of the ferrofluid for a concentric annuli were increased with the rise of the revolution and magnetic field strength due to the increased heat dissipation between hot side and cold side of the concentric annuli.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.13.1-13.1
• /
• 2009

에어로젤은 인류가 개발한 소재 중에서 가장 가벼운 고체로, 기공률이 90%이상이고 비표면적은 ~1000m2/g, 기공의 크기는 10nm 크기로 이루어진 나노기공 물질이다. 1931년에 Kisley가 물유리로부터 실리카 에어로젤을 합성한 이래로 실리카 에어로젤에 대한 연구가 가장 많이 이루어져왔으며, 단열소재, 흡음재, 체렌코프우주선 디텍터, 반도체의 초저유전소재, 유출된 석유의 정제, 촉매 등에 대한 응용에 대해서도 연구가 많이 이루어져 왔다. 그리고TiO2와 같은 광촉매 에어로젤 소재, 카본 에어로젤 소재등 다양한 나노기공 소재에 대해서도 연구가 이루어지고 있으며, 카본 에어로젤의 경우 나노기공과 비표면적을이용한 전기이중층 커패시터 (EDLC)에 대한 연구도 이루어지고 이다. 본 연구에서는 첫째로, 실리카 에어로젤에 대한 연구결과를 소개하고 이의 단열소재로서의 응용가능성에대하여 언급하고자 한다. 실리카 에어로젤 나노기공 소재의 경우, 기공크기가 10nm크기로 매우 작고 공기의 자유이동길이와 거의 비슷하여서 대류에 의한 열전달을 낮출 수 있으며, 낮은 고체함량으로 인하여 포논에 의한 열전달을 낮출 수 있기 때문에 단열소재로서 최고의 성능을 나타낸다. 하지만, 문제는 높은 기공률로 인한 기계적인 취약성이 문제이다. 따라서 이를 보완하기 위항 섬유로 에어로젤을 보강할 수 있는데, 이를통하여 에어로젤 나노기공소재와 섬유보강에 의한 복합화에 대하여 말하고자 한다. 또 다른 하나의 연구방법은유기-무기 하이브리드 나노기공 소재를 합성하는 것이다. 여기서는하나의 방법으로 MTEOS-TEOS의 하이브리드화와 초임계 건조공정에 의한 나노기공 소재에 대한 연구결과를소개하고자 한다. 마지막으로 카본 에어로젤 나노기공소재의 합성과 나노기공 구조의 제어 및 물성평가에 대한 것을 말하고자하는데, 본 발표에서는 레소시놀과 포름알데히드를 촉매에 의한 중합반응을 통하여 유기 에어로젤 소재를 합성하고 분위기에서탄소화 공정을 통하여 카본에어로젤을 합성하였다. 또한 금속 니켈을 도입하는 것에 의하여 탄소/니켈 복합 하이브리드 에어로젤 소재를 합성하고 슈퍼커패시터 전기화학 특성에 대한 연구결과를 발표하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.459-465
• /
• 2013

In the manufacturing process of steel plates, materials at high temperatures above $800^{\circ}C$ are rapidly cooled by using a circular impinging water jet to determine their strength and toughness. In this study, the basic heat and fluid flow is solved by using the existing numerical model for boiling heat transfer. Actually, steel undergoes a phase change from austenite to ferrite or bainite during the cooling process. The phase change induces changes in its thermal properties. Instead of directly solving the phase change and the material cooling together, we solve the heat transfer only by applying the thermal properties that vary with temperature, which is already known from other studies. The effects of the changes in the thermal properties on the cooling of steel and the necessity of calculating the phase change are discussed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.933-938
• /
• 2011

In this study, the heat transfer characteristics and NOx and CO emissions of a heat exchanger were investigated using a premixed burner. The experiments involved changing the distance between the burner and heat exchanger to 30, 40, and 50 mm with various equivalence ratios. The results showed that the NOx and CO emissions increased as the equivalence ratio was increased because the flame temperature increased, regardless of the distance between the burner and heat exchanger. In particular, the CO emission increased significantly as the distance between the burner and heat exchanger was decreased. The optimal equivalence ratio for the A-type heat exchanger (distance between the burner and heat exchanger: 30 cm) was 0.7 in the experimental range. In this case, the CO and NOx emissions were 94.5 ppm and 11.2 ppm, respectively, and the efficiency was 84.1%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7773-7780
• /
• 2015

Analysis of existing kettle and its heating system has been the topic for localization technology development. Test pieces are made, polished and etched for existing kettle analysis. Surface of test pieces is observed using SEM, the kettle is verified to be made by deep drawing process from Ferrite-Perlite material. The kettle is also identified to be plated $16{\sim}49{\mu}m$ of thickness with Nickel(16%). Also heat transfer characteristics based on hot wire arrangement is investigated and optimal hot wire system is developed. Developed control system detects overheating and stops the whole system on the long operating time. Developed kettle takes the performance evaluation test for volume expansion and satisfied for standard 'KS G3602'.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.27-37
• /
• 2021

The use of additive manufacturing processes for the repair and remanufacturing of mechanical parts has attracted considerable attention because of strict environmental regulations. Directed energy deposition (DED) is widely used to retrofit mechanical parts. In this study, finite element analyses (FEAs) were performed to investigate the influence of the substrate phase and inclination angle on the heat transfer characteristics in the vicinity of Hastelloy X regions deposited via DED. FE models that consider the bead size and hatch distance were designed. A volumetric heat source model with a Gaussian distribution in a plane was adopted as the heat flux model for DED. The substrate and the deposited powder were S45C structural steel and Hastelloy X, respectively. Temperature-dependent thermal properties were considered while performing the FEAs. The effects of the substrate phase and inclination angle on the temperature distributions and depth of the heat-affected zone (HAZ) in the vicinity of the deposited regions were examined. Furthermore, the influence of deposition paths on depths of the HAZ were investigated. The results of the analyses were used to determine the suitable phase and inclination angle of the substrate as well as the appropriate deposition path.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.4
• /
• pp.243-250
• /
• 2017

A fire phenomenon of a solid such as wood involves a phenomenon in which solid is heated from the outside and the gas generated through the thermal pyrolysis process of the material is burnt. The thermal pyrolysis phenomenon of the solid is a phenomenon in which the amount of energy incident from the outside, the amount of heat dissipation of the solid material, the heat transfer between the solid material and the surroundings including the amount of heat transfer to the air adjacent to the solid surface, and the fraction of oxygen in the air. In this paper, we calculate the required ignition temperature to simulate the fire phenomenon as simple as possible. By using cone calorimeter, the ignition time was measured by variously controlling the heat flux flowing into the wood specimen by using various wood specimens. The user friendly program is developed for calculation of the ignition temperature. Five different woods such as low density MDF, high density MDF, plywood, douglas fir and PB with various thickness are considered. The ignition temperatures suggested in this paper can be used for fire propagation analysis for woods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5202-5207
• /
• 2011

A temperature control system is very important part in many industrial applications. Typical development procedures for temperature control system consist of several stages such as conceptual system design, construction of physical system, controller design based on the mathematical model for the system, and performance test. Since the mathematical model is usually obtained with the aid of system identification technique based on repeated experiments after construction of the physical system, the above procedures require very large amount of time and cost. It takes also large amount of time in the controller design and performance test procedures. In this paper, a virtual development scheme, which can predict the performance of the temperature control system prior to construction of physical system, for rapid validation of the initial system design is proposed. The effectiveness of the proposed scheme is shown by using SISO (Single Input Single Output) example.

• Journal of Korea Foundry Society
• /
• v.17 no.6
• /
• pp.552-559
• /
• 1997

주조방안설계를 위한 pre-processor, main-solver 그리고 post-processor로 구성된 통합 응고해석 시스템을 개발하였다. Pre-processor는 퍼스널 컴퓨터에서 사용되는 상용 CAD 프로그램인 AutoCAD를 사용하였다. Main-solver는 주조과정중의 충진거동을 해석한 유동해석 프로그램과 3차원 열전달 응고해석을 통합하여 냉각수 시스템으로 제어되는 금형 반복주조법에서의 응고양상을 해석할 수 있다. Post-processor는 cavity내의 용탕충진거동, 주형내의 온도분포, 응고시간등을 3차원 그래픽으로 처리할 수 있게 설계하였다. 개발된 시스템의 현장적용 가능성을 검증하기 위하여 대형주강 밀하우징, 자동차휠 주조용품, 밸브블럭등의 시제품의 열유동해석에 적용하였다. 본 연구에서 개발된 CastDesigner는 중소기업형 주조현장에서 PC용 CAD/CAE system 구축을 통한 최적주조방안 설계용 열유동해석 프로그램으로 사료된다.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.483-488
• /
• 2001

In the present study a numerical simulation is performed on a natural convection inside a square cavity with a vibrating wall. The study has been conducted varying the heat transfer rate, wall excitation frequency and also the orientation of the cavity. The temperature and velocities inside the cavity was observed and also, the heat transfer coefficients on the heating wall was seen. From the results, it can be seen that the temperature inside the cavity decreases when excited with the proper frequency and the heat transfer coefficient increased with cavity inclination angle, ${\theta}$. It is also found from the results that flow resonance is occurred near the inclination angle ${\theta}=90^{\circ}$.