• 설비공학논문집
• /
• 제15권3호
• /
• pp.230-238
• /
• 2003

R407C is considered as alternative refrigerant of R22 for air conditioners. Experimental investigation is made to study the condensation heat transfer characteristics of slit fin-tube heat exchanger using alternative refrigerant, R407C. Experiments are carried out at condensation pressure of 2110 kPa and 1943 kPa with the degree of superheat of 1$0^{\circ}C$ and mass flux varying from 150 to 250 kg/$m^2$s for refrigerant side. The inlet air condition is dry bulb temperature of 35$^{\circ}C$, relative humidity of 50% and air velocity varying from 0.8 to 1.6 m/s. Experiments show that pressure drop gets smaller at a higher condensation pressure especially when condensation pressure is raised from 1943 to 2110 kPa. Heat transfer rate gets smaller at a lower condensation pressure in the range of experimental condition.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.59-69
• /
• 1996

냉동.공조 및 각종 화학공업에 널리 사용되는 열교환기인 응축기의 고성능화 및 합리적인 설계를 위해서는 냉매의 정확한 응축열전달률 예측과 그 메카니즘 규명이 필수 요건이다. 본 연구에서는 내경 9.7mm, 외경 12.7mm, 길이 1200mm의 수직 이중관 응축기의 압력강하 및 응축열전달특성을 실험적으로 밝혔다. 실험으로부터 Lockart-Martinelli의 상관 관계식을 이용한 수직 응축관내 압력강하 특성을 종래의 실험식들과 비교.검토하고 새로운 압력강하식을 제안하였다. 그리고 종래의 해석방법과는 달리 비환상류 모델을 가정한 해석결과로부터 전 유동양식에 걸쳐 적용할 수 있는 새로운 응축열전달 예측식을 제안하였다.

• 한국광학회지
• /
• 제1권2호
• /
• pp.204-209
• /
• 1990

Nd:YAG 레이저봉을 이용한 간단한 간섭장치를 구성하여 단일펄스 및 고반복률 펌핑 후 레이저봉의 간섭효과에 의한 간섭무늬의 이동갯수를 이용하여 레이저봉의 온도를 측정하였으며, 간섭무늬의 시간적인 변화와 열확산 방정식을 풀어서 얻은 레이저봉의 온도와 비교하였다. 아울러 레이저봉에 누적된 열에너지의 공간분포와 정도를 측정하여 본 연구에서 사용된 금도금된 섬광관 펌핑 반사체에 의한 레이저봉의 펌핑 균일도 및 열전달률을 평가하였다.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.20-25
• /
• 2007

The performance of air-to-air heat exchanger has been investigated with rotating porous plates newly developed in this study. With an equal interval of 18 mm, the rotating porous plates are installed inside the heat exchanger where the hot and cold airs enter at opposite ends. When flowing in opposite directions by the separating plate installed in the center of the rotating porous plates, the airs give and receive the heat each other. Dry bulb temperature is set by adjusting heat supply at heater. In order to measure the temperature distribution of the hot air side inside heat exchanger, the thermocouples are inserted between the plates. The first location of thermocouple is 10mm downstream from the inlet of heat exchanger, and succeeding ten locations are aligned at an equal interval of 18mm. From the experiment of air-to-air heat exchanger with the rotating porous plates, the heat transfer rate increased as both air flow rate and RPM of the rotating porous plate increased. It was found that the overall heat transfer coefficient increased with the increase in RPM of porous plate at the conditions of the same air flow rate.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1147-1152
• /
• 2009

The objectives of this paper are to study the characteristics of heat transfer and pressure drop of the zigzag channel PCHE using diffusion bonding technology by numerical analysis. PCHE of five types are designed, which are zigzag channel angle $180^{\circ}$, $160^{\circ}$, $140^{\circ}$, $120^{\circ}$ and $100^{\circ}$. The zigzag PCHE was numerically investigated for Reynolds number in a range of $150{\sim}800$. The temperatures of the hot side were performed at $80^{\circ}C$ while that of the cold side was conducted at $20^{\circ}C$. The results show that the performance of heat transfer rate for zigzag channel $100^{\circ}$ increases about 11.5% compared to that of zigzag channel $180^{\circ}$. On the other hand, the performance of pressure drop for zigzag channel $100^{\circ}$ is remarkably higher than that of zigzag channel $180^{\circ}$, about 1.4 times.

• 에너지공학
• /
• 제25권4호
• /
• pp.7-12
• /
• 2016

본 연구는 냉각효과를 높이기 위해 냉각채널 형상에 대한 변수를 다루고 있다. 냉각효과가 증가하면 제조현장에 있는 공장에 의해 발생되는 배출가스량은 감소하게 된다. 이러한 문제를 해결하기 위해 효율적인 냉각시스템에 대한 설계가 필요하다. 따라서, 본 연구에서는 냉각채널을 냉각성능을 향상시키기 위해 수치분석을 수행하였다. 배플과 핀의 길이에 영향을 받는 열전달률은 수치해석에 의해 계산이 된다. 3차원 레이놀즈 평균 나비아스토크 방정식이 유동과 냉각채녈의 열전달을 계산하는데 사용되며 난류영역은 $k-{\varepsilon}$ 모델이 사용되었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.317-322
• /
• 2005

This study is aimed to analyze the effects of heat pipe shape on the heat transfer in solar collector with a axial grooved heat pipe. In the design of a heat pipe. two of the most important criteria to be met are the operating temperature range and the maximum heat transport capacity, When the operating temperature range is known and the working fluid has been selected, the maximum heat transport capacity depends strongly on capillary pressure and liquid flow. The heat transport capacity of the heat pipe will depend on the geometry of the heat pipe, the wick structure. the vapor channel shape. groove number. cooling temperature. condenser length and pipe diameter. So various shapes are used for mathematical models of two-phase flow in grooved heat pipe. From the results. the adequate groove shape and scale are presented by considering the heat transport and capillary limitation.

• 설비공학논문집
• /
• 제11권6호
• /
• pp.855-860
• /
• 1999

An experimental study of jet impingement on the surface with linear temperature gradient is conducted with the presentation of the turbulent characteristics and the heat transfer rates measured when this jet impinges normally to a flat plate. The jet Reynolds number ranges from 30,000 to 90,000, the temperature gradient of the plate is 2~$4.2^{\circ}C$/cm and the dimensionless nozzle to plate distance(H/D) is from 6 to 10. The results show that the peak of heat transfer rate occurs at the stagnation point, and the heat transfer rate decreases as the radial distance from the stagnation point increases. A remarkable feature of the heat transfer rate is the existence of the second peak. This is due to the turbulent development of the wall jet. Maximum heat transfer rate occurs when the axial distance from the nozzle to nozzle diameter(H/D) is 8. The heat transfer rate can be correlated as a power function of Prandtl number, Reynolds number and the dimensionless nozzle to plate distance(H/D). It has been found that the heat transfer rate increases with increasing turbulent intensity.

• 설비공학논문집
• /
• 제21권9호
• /
• pp.475-482
• /
• 2009

The objectives of this paper are to study the characteristics of heat transfer and pressure drop of the zigzag channel PCHE using diffusion bonding technology by numerical analysis. PCHE of five types are designed, which are zigzag channel angle 180$^{\circ}$, 160$^{\circ}$, 140$^{\circ}$, 120$^{\circ}$ and 100$^{\circ}$. The zigzag PCHE was numerically investigated for Reynolds number in a range of 150$\sim$800. The temperatures of the hot side were performed at 80$^{\circ}$ while that of the cold side was conducted at 20$^{\circ}C$. The results show that the performance of heat transfer rate for zigzag channel 100$^{\circ}$ increases about 11.5% compared to that of zigzag channel 180$^{\circ}$. On the other hand, the performance of pressure drop for zigzag channel 100$^{\circ}$ is remarkably higher than that of zigzag channel 180$^{\circ}$, about 2.4 times.

• 대한기계학회논문집B
• /
• 제37권4호
• /
• pp.367-375
• /
• 2013

본 연구는 타원형 핀-튜브 열교환기에 대해 AR, 피치, 와류발생기의 위치, 튜브 표면의 돌기형상에 따른 열전달계수 및 압력강하 특성을 수치해석으로 분석하였다. CFD해석시 경계조건으로는 튜브표면의 온도는 348 K이고, 입구공기속도는 1~5 m/s 범위로 가정하였고, 수치해석시 사용된 모델로는 민감도를 고려하여 RSM 7차 난류모델을 하였다. 해석결과로는 AR 및 세로피치가 작을수록 열전달률이 향상되는 것으로 나타났으며 가로피치에 대한 영향은 근소한 차이를 나타냈으며, 와류발생기의 설치는 튜브 전방에 위치할수록 열전달특성상 양호한 것으로 나타났다. 또한 튜브표면의 돌기형상은 톱니형보다 원형이 압력강하나 열전달특성이 유리한 것으로 나타났다.