• Journal of Korean Society of Steel Construction
• /
• v.13 no.5
• /
• pp.525-533
• /
• 2001

The wind resistant design of long-span bridges has urged a special attention to the prevention of the flutter occurrence Therefore calculation of flutter derivatives is indispensable to this prediction. A used system identification method must identify all the flutter derivatives from noisy experimental data In this paper MITD(Modified Ibrahim Tim Domain) method and AKF (Adaptive Kalman Filter) method are applied to extract flutter derivatives from section-model tests. The robustness and reliability of proposal SI methods under a high signal-to-noise ratio is demonstrated through numerical simulation for windtunnel test.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.107-114
• /
• 1996

Monte carlo method is especially a useful method for the analysis of thermal noise of semiconductor devices since the time dependence of microscopic details is simulated directly. Recently, a mthod for the calculation of the instantaneous currents of 2-dimensional devices, which is numerically more accurate than the conventional method, has been proposed using the generalized ramo-shockley theorem. Using this mehtod we investage the validity of the existing thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise using ramo-shockley theorem is shown to be applicable to 2 dimensional devices if the frequency of interest is low enough. The correlation between electrons in different regions of th echannel is shown not to be negligible. And we also obtian the spatial map of the noise in the channel region. By doing so, we show that the steady state nyquist theorem is the correct theory rather than the theory by van der ziel et.al.

• Convergence Security Journal
• /
• v.2 no.2
• /
• pp.99-108
• /
• 2002

In this paper, I propose a reference image updating algorithm for Intruder Detection System using a difference image method that can reliably separate moving objects from noisy background in the image sequence received from a camera at the fixed position. The proposed algorithm consists of four process determines threshold value and quantization, segmentation of a moving object area, generation of adaptive temporary image that removes a moving object area, and updates reference image using median filtering. The test results show that the proposed algorithm can generate reference image very effectively in the noisy environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.71-74
• /
• 2012

We have manufactured a close range Dicke type radiometer which consists of two stage low noise amplifier and diode detector. Frequency range of this system is 35 GHz. And this is used for studying temperature calibration on specific objects. We have present millimeter-wave radiometer's thermal calibration method and its characteristics. From absolute temperature 299K to 309K, in proportion to increase temperature, output voltages are linearly increased. In this case, undefined objects can be measured thermal noise temperature relatively. Overall from absolute temperature 214K to 309K, we have obtained relation of temperature and output voltage;V= 0.03601K - 10.70517.

• Tribology and Lubricants
• /
• v.28 no.6
• /
• pp.289-296
• /
• 2012

Atomic force microscopy (AFM) has been used for imaging surfaces and measuring surface forces at the nano-scale. Force calibration is important for the quantitative measurement of forces at the nano-scale using AFM. Normal force calibration is relatively straightforward, whereas the lateral force calibration is more complicated since the lateral stiffness of the cantilever is often comparable to the contact stiffness. In this work, the lateral force calibrations of the rectangular cantilever were performed using torsional Sader's method, thermal noise method, and wedge calibration method. The lateral optical lever sensitivity for the thermal noise method was determined from the friction loop under various normal forces as well. Experimental results showed that the discrepancies among the results of the different methods were as large as 30% due to the effect of the contact stiffness on the lateral force calibration of the cantilever used in this work. After correction for the effect of contact stiffness, all the calibration results agreed with each other, within experimental uncertainties.

• Journal of Digital Contents Society
• /
• v.5 no.3
• /
• pp.219-224
• /
• 2004

In This paper, we have analyzed the power spectrum of DS-TH Ulhawideband (Direct Sequence-Time Hopping UWB) system which used pseudo-noise (PN) code. The DS-TH UWB system proposed in this paper multiplies the information signal with PN code to construct pulse train with random pattern and then the chips in pulse train are bundled into several groups to map to the particular value. The (+)/(-) pulse is tented in the time slot of frame by comparing a particular value with timing information that was stored in the lookup table. Thus, the energy spark (Comb Line) which is generated certainly in convantional system can be suppressed efficiently by PN code. And we knew that the proposed DS-TH UWB System even could have very smoothing power spectrum ctaracteristic without applying high speed Time-Hopping code.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.78-85
• /
• 1998

In this paper, we analyzed the performances for FH/CPFSK system with limiter - discriminator detection and integrate-and-dump post-detection filtering under thermal noise and partial-band jamming noise. And, we considered intersymbol interference - related SNR and differential phase parameters for all eight of the possible adjacent bit data patterns, FM noise clicks for evaluating FH/CPFSK and CPFSK systems. In result, the optimum modulation index h was 0.7 and the optimum value of bandwidth-time product D was 1.0. Next, when we considered the thermal noise under the partial-band jamming, the thermal noise significantly influenced the error probability of system below 20dB approximately but could ignore above 20dB.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.857-864
• /
• 2002

Channel coding is one of the most important things to improve digital communications. In this paper, we analyze the performance of turbo code with block interleaver using hopping algorithm (i. e., non-linear interleaver) for high speed multi-media service. The input and output of conventional block interleaver is achieved by the order of column and row, but hoping algorithm is achieved by hopping the column and row that increase the minimum distance and average distance between the nearest data dually. To verify and compare the performance of an proposed method the computer simulation have been performed using turbo code in gaussian channel environment.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.133-138
• /
• 2003

가변길이 부호는 정보원(source)의 통계적인 특성을 이용하여 부호화 효율을 높이지만. 잡음이 심한 전송환경에선 비트에 대한 오류가 발생하면 심각하게 손상되는 단점을 가진다. 이러한 가변길이 부호의 문제를 해결하기 위해 양방향 가변길이 부호가 제안되었다. 양방향 가변길이 부호는 순방향과 역방향으로 복호가 가능하여 전송 오류로 인해 손상된 비디오 비트열에서 데이터를 복구할 수 있다. 부호의 자유거리(free distance)는 부호자체가 전송 오류에 얼마나 강인한지를 보여주는 척도로 사용된다. 양방향 가변길이 부호의 자유거리(free distance)의 최소 값은 1이므로 비디오 비트열 손상 자체를 방지할 수는 없다 본 논문에서는 자유거리(free distancs)의 최소 값을 증가시켜 전송오류에 더욱 강인한 새로운 양방향 가변길이 부호의 선계 기법을 제안한다. 제안된 알고리즘은 주어진 Huffman 부호와 평균부호길이 함수의 특성을 이용하여 자유거리의 조건을 만족하면서 동시에 부호화 효율을 높여 기존의 알고리즘보다 향상된 성능을 보여준다.

• Tribology and Lubricants
• /
• v.28 no.5
• /
• pp.203-211
• /
• 2012

Atomic force microscopy (AFM) has been used as a tool, not only for imaging surfaces, but also for measuring surface forces and mechanical properties at the nano-scale. Force calibration is crucial for quantitatively measuring the forces that act between the AFM probe of a force sensing cantilever and a sample. In this work, the lateral force calibrations of a V-shaped cantilever were performed using the finite element method, multiple pivot loading, and thermal noise methods. As a result, it was shown that the multiple pivot loading method was appropriate for the lateral force calibration of a V-shaped cantilever. Further, through crosschecking of the abovementioned methods, it was concluded that the thermal noise method could be used for determining the lateral spring constants as long as the lateral deflection sensitivity was accurately determined. To obtain the lateral deflection sensitivity from the sticking portion of the friction loop, the contact stiffness should be taken into account.