• Journal of Korea Water Resources Association
• /
• v.43 no.10
• /
• pp.911-920
• /
• 2010

The closed water bodies, such as reservoirs and lakes, could be contaminated by an inflow of pollutants in the upstream as well as a stratification caused by seasonal natural phenomena. The vertical circulation particularly plays an important role in reduction of environmental pollutants. The factors of the vertical circulation are the temperature, wind, thermal diffusivity and sunlight. The wind is probably the most significant factor among them. Thus, it is necessary to describe the validation and application of a three-dimensional numerical model of wind-induced circulation in a thermally stratified flow. In this paper, a three-dimensional numerical model for the thermally stratified flows is presented. The model is conducted in three steps to calculate the velocity components from the momentum equations in x- and y- axis directions, the elevations from the free surface equation and the temperature from the scalar transport equation. Numerical predictions are compared with available analytical solutions for the sloshing free surface movement in a rectangular basin. The numerical results generally show a reasonable agreement with analytical solutions. And the model is applied to the circulation for the wind induced flow in a thermally stratification. Consequently, the developed model is validated by two verifications and phenomena of the internal flow.

• Journal of Korea Water Resources Association
• /
• v.47 no.10
• /
• pp.945-958
• /
• 2014

Soil temperature is one of the most important environmental factors that govern hydrological and biogeochemical processes related to diffuse pollution. In this study, considering the snowmelting and the soil freezing-thawing processes, a set of computer codes to estimate winter soil temperature has been developed for CAMEL (Chemicals, Agricultural Management and Erosion Losses), a distributed watershed model. The model was calibrated and validated against the field measurements for three months at 4 sites across the study catchment in a rural area of Yeoju, Korea. The degree of agreement between the simulated and the observed soil temperature is good for the soil surface ($R^2$ 0.71~0.95, RMSE $0.89{\sim}1.49^{\circ}C$). As for the subsurface soils, however, the simulation results are not as good as for the soil surface ($R^2$ 0.51~0.97, RMSE $0.51{\sim}5.08^{\circ}C$) which is considered resulting from vertically-homogeneous soil textures assumed in the model. The model well simulates the blanket effect of snowpack and the latent heat flux in the soil freezing-thawing processes. Although there is some discrepancy between the simulated and the observed soil temperature due to limitations of the model structure and the lack of data, the model reasonably well simulates the temporal and spatial distributions of the soil temperature and the snow water equivalent in accordance with the land uses and the topography of the study catchment.

• Journal of Korea Water Resources Association
• /
• v.47 no.8
• /
• pp.729-742
• /
• 2014

This study predicted long-term sediment distribution for 76 years by using RMA-2 which is two-dimensional numerical model and SED2D which is the sediment transport model to quantitatively analyze sediment distribution in the reservoir based on sediment intrusion and efficiently manage the reservoir. For water level-discharge-sediment data required in boundary conditions of the model, real-time data measured by the Korea Water Resources Corporation were used. The sediment input data was calculated using K-DRUM model. Sedimentation depth was compared with results of model by collecting cross-section core in the reservoir during the dry season. As the result of validation, the sediment depth in the reservoir was similar to actually measured value. For prediction of long-term sediment distribution, terrain data measured in 2012 was used as starting crosssection and simulations for 76 years until 2088 were made. As the results of simulations, sediment distributions of 1.63~1.26 m and 1.45~0.007 m were shown in upstream and downstream of Hapcheon Dam, respectively.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.473-480
• /
• 2009

The 180 minutes fire test based on the standard curve of ISO-834 were conducted on three RC column specimens with different constant axial loading ratios to evaluate the fire performance of fiber cocktail (polypropylene+steel fiber) reinforced high strength concrete column. The columns were tested under three loading levels as 40%, 50%, and 61% of the design load. No explosive spalling has been observed and the original color of specimen surface has been changed to light pinkish grey. The maximum axial displacements of three specimens were 1.5~2.2 mm. There was no reduction in load bearing capacity of each specimen exposed to fire and no effect were observed on the fire performance within 61% of the design load. The tendencies of the results with loading, such as the temperature distribution of in concrete and the changes in temperature rise due to the water vaporization in concrete, are very similar to those without loading. The final temperatures of steel rebar after 180 minutes of fire test resulted in 491.4${^{\circ}C}$ for corner rebar, 329.0${^{\circ}C}$ for center rebar, and 409.8${^{\circ}C}$ for total mean of steel rebar. The difference of mean temperature between corner and center rebar was 153.7${^{\circ}C}$ㅍ. The tendency of temperature rise in concrete and steel rebar changed after 30~50 minutes from the starting time of the fire test because the heat energy influx into corner rebar is larger than that into center rebar. The cause of decrease in temperature rise was due to the water vaporization in concrete, the lower temperature gradient of the concrete with steel and polypropylene fiber cocktails, the moisture movement toward steel rebars and the moisture clogging.

• International Commerce and Information Review
• /
• v.14 no.1
• /
• pp.87-114
• /
• 2012

The purpose of this paper is to analyze the economic effects of Foreign Direct Investment(FDI) and human capital using VECM in Korea from 1970 to 2009. Empirical results through VECM show that the coefficients of GDP, GFO(gross fixed capital), LAB(total labor), EXO(export), PCDB(public and commercial loan) and FDI have had a positive impact on Korean economic growth. In contrast, the effects of PCDB and FDI were not as significant as the other variables. In particular, the interaction effect, $FDI^*EDU$(the college graduation variable), was more important than that of the FDI alone. However, the coefficient of $FDI^*EDU$ was not so big. Korean government needs to attract more FDI to enhance Korean economic growth rate by the improvement of investment environment. There are a big amount gap between notification FDI and arrival FDI in Korea. So Korean government and companies should actively persuade foreign investors to invest after their investment notification. Also the Korean college authorities should emphasize more on curriculum which adapts to company skill in the field work.

• Journal of the Korean Geographical Society
• /
• v.51 no.1
• /
• pp.23-40
• /
• 2016

In this study, long-term changes in means and extreme events of precipitation during summer rainy period called Changma (late June~early September) are examined based on rainfall data observed by Chukwooki during Joseon Dynasty (1777~1907) and by modern rain-gauge onward (1908~2015) in Seoul, Korea. Also, characterizations of the relevant changes in synoptic climate fields in East Asia are made by the examination of the NCEP-NCAR reanalysis I data. Analyses of 239-year time series of precipitation data demonstrate that the total precipitation as well as their inter-annual variability during the entire Changma period (late June~early September) has increased in the late 20th century and onward. Notably, since the early 1990s the means and extreme events during the summer Changma period (late June~mid-July) and Changma break period (late July~early August) has significantly increased, resulting in less clear demarcations of sub-Changma periods. In this regard, comparisons of synoptic climate fields before and after the early 1990s reveal that in recent decades the subtropical high pressure has expanded in the warmer Pacific as the advection of high-latitude air masses toward East Asia was enhanced due to more active northerly wind vector around the high pressure departure core over Mongolia. Consequently, it is suggested that the enhancement of rising motions due to more active confluence of the two different air masses along the northwestern borders of the Pacific might lead to the increases of the means and extreme events of Changma precipitation in Seoul in recent decades.

• Journal of the Korean earth science society
• /
• v.41 no.1
• /
• pp.31-39
• /
• 2020

Cheonji, the largest caldera lake in Asia, is located at the summit of Baekdu Mountain. Cheonji is covered with snow and ice for about six months of the year due to its high altitude and its surrounding environment. Since most of the sources of water are from groundwater, the water temperature is closely related to the volcanic activity. However, in the 2000s, many volcanic activities have been monitored on the mountain. In this study, we analyzed the dimension of ice produced during winter in Baekdu Mountain using Sentinel-1 satellite image data provided by the European Space Agency (ESA). In order to calculate the dimension of ice from the backscatter image of the Sentinel-1 satellite, 20 Gray-Level Co-occurrence Matrix (GLCM) layers were generated from two polarization images using texture analysis. The method used in calculating the area was utilized with the Support Vector Machine (SVM) algorithm to classify the GLCM layer which is to calculate the dimension of ice in the image. Also, the calculated area was correlated with temperature data obtained from Samjiyeon weather station. This study could be used as a basis for suggesting an alternative to the new method of calculating the area of ice before using a long-term time series analysis on a full scale.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.1
• /
• pp.11-18
• /
• 2020

High-pressure synchrotron X-ray powder diffraction experiments were performed on natural illite (K_0.65Al₂(Al_0.65Si_3.35)O₁₀(OH)₂) using diamond anvil cell (DAC) under two different pressure transmitting media (PTM), i.e., water and ME41 (methanol:ethanol = 4:1 by volume). When using water as PTM, occasional heating was applied up to about 250℃ while reaching pressure up to 2.7 GPa in order to promote both hydrostatic conditions and intercalation of water molecules into the layer. When using ME41, pressure was reached up to 6.9 GPa at room temperature. Under these conditions, illite did not show any expansion of interlayer distance or phase transitions. Pressure-volume data were used to derive bulk moduli (K₀) of 45(3) GPa under water and 51(3) GPa under ME41 PTM. indicating no difference in compressibility within the analytical error. Linear compressibilities were then calculated to be β^a = 0.0025, β^b = 0.0029, β^c = 0.0144 under ME41 PTM showing the c-axis is ca. six times more compressible than a- and b-axes. These elastic behaviors of illite were compared to muscovite, one of its structural analogues.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2011

In this study, we have measured the charring rate of solid sawn timber as a preceding step for develop performance based fire safety design method of wood framed building structures. The follows are the summary of fire test results carried out with $400{\times}400$ mm cross-section Douglas-fir in varied of thickness and grain directions. I) When the timber thickness increase under same dimension, the charring rate decreases gradually. It is seemed the charring layer up on a thickness roles as a insulation, gives combustion delaying time to specimen. 2) The charring rates measured at different depths (10, 20, 30, 40 mm) in timber which varying thickness (20, 40, 80, 120 mm) when exposed maximum 1 hour standard fire increase by 30 mm depth, but decrease at 40 mm. It is seemed the minimum charr layer should be 30 mm for having role of insulation. 3) The charring rate of cross section surface (direction of perpendicular to grain) was more high than that of grain direction. It can be explained by the cracks and gaps from greater charr contraction made more heat flux incident into timber.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.169-177
• /
• 2017

Rather than causing damage from heat, blast, and radiation of a regular nuclear weapon, recently, it is predicted that North Korea has been inventing high altitude electromagnetic pulse (HEMP) missile in order to incapacitate electronic equipment. HEMP shielding facility is used for military purpose today. Despite the electromagnetic shielding effects from high quality compression plates, problems may include such as the possibility of electromagnetic influx resulting in the welding of the compression plates, and difficulties and high cost of construction. Therefore, in this study, a high electrical conducting material was added to the concrete experimental subject to ensure the shielding effect through electromagnetic waves to for the concrete structure, instead of building a shielding facility separately for the structure. Also, among the experimental subjects, 100 ${\mu}m$ of Iron-Aluminum alloy metal spraying coat was applied to two types with the highest shielding effect, and to two types with the lowest shielding effect. The result of the experiment indicates that experimental subjects added with a high electrical conductivity material did not meet the minimum shielding criteria of MIL-STD-118-125-1 standard, but all the experimental material applied to the metal spraying coating satisfied the minimum shielding criteria. In conclusion, it is considered that 100 µm of Iron-Aluminum alloy metal spraying coat contains high efficiency in the HEMP shielding.