• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.1
• /
• pp.41-48
• /
• 1999

The heat transportation from a complex of industry to a rural area needs more efficient method because the distance between them is usually more than 10km. Conventional heat transportation using steam or hot water via pipe line has limits in transportation distance (about 3-5 km) because of the heat loss and frictional loss in the pipe line. Metal hydride can absorb or discharge hydrogen through exothermic and endothermic reaction. After releasing hydrogen from metal hydride with heatings by waste heat from industry we can transport this hydrogen to the rural area via pipe line. In the urban areas other metal hydride reacts with this hydrogen and produces heat for heating. Cool heat is also obtained if it is possible to use metal hydride with low reaction temperature. So metal hydride can be used as a media for transportation, storage of heat. Some problems of the heat transportation using metal hydrides, and the example of heat transportation system were discussed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.268-273
• /
• 1997

사용후핵연료는 장기간 강한 방사선과 붕괴열이 방출된다. 따라서 사용후핵연료를 안전하게 운반하기 위하여 수송용기는 방사선차폐의 건전성, 격납경계의 유지 및 내부 붕괴열의 적절한 제거 등의 설계기준을 만족하도록 설계되어야 한다. 본 연구에서는 28개의 PWR 사용후핵연료집합체를 운반할 수 있는 KSC-28 수송용기의 적절한 열전달 특성을 갖는 copper 냉각핀 및 aluminum 전열판을 설정하였다. 또한, 정상수송조건 및 화재사고조건에 대한 열전달해석을 수행하여 수송용기의 열적 건전성을 평가하였고 여기에서 얻어진 온도를 열하중으로 고려하여 열응력해석을 수행함으로써 수송용기의 온도변화에 따른 구조적 건전성을 평가하였다.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.932-937
• /
• 1995

1990년 12월 카나다의 Darlington 2호기에서 발생한 핵연료 다발의 양쪽 지지판에 있는 지지 금속판의 파손은 펌프 날개 통과 압력 충격파가 Acoustic 성격으로 중폭되어 연료봉지지판의 파손을 일으킨 것으로 추정되었고 이에 따른 주열수송계통에 대한 ABAQUS를 이용한 Acoustic 해석과 수많은 실험을 거쳐 Acoustic 압력 충격파가 핵연료 다발의 연료봉 지지판 파손 원인임이 입증되었다. 이러한 Acoustic 해석과 실험의 결과로써 Darlington 발전소의 열수송 펌프를 5 날개 펌프에서 7 날개 펌프로 교체시키게 되었으며 그 결과 핵연료 스트링의 축방향 진동을 감소시켜 연료봉 지지판의 파손을 방지하게 되었다. 이러한 사례로 인하여 최근 CANDU형 원자로 열수송 계통의 Acoustic 해석에 대한 연구가 AECL의 Chalk River Laboratory와 COG(CANDU Owners Group)에서 활발하게 진행되고 있다. 이 기고문에서는 매우 새로운 분야로써 현재 이루어지고 있는 CANDU형 원자로 열수송 계통의 Acoustic 해석을 위한 해석 이론과 해석 방법을 간단히 요약 정리하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.447-452
• /
• 1996

본 연구에서는 7개의 PWR 사용후핵연료집합체를 운반할 수 있는 KSC-7 수송용기의 건식수송조건에 대한 열적 건전성을 평가하였다. 수송용기 축소모델을 제작하여 열시험을 수행하였고 또한, 시험조건과 동일한 조건으로 열전달해석을 수행하여 두가지 결과를 비교 분석함으로써 시험 및 해석결과에 대한 신뢰성을 검증하였다. 신뢰성이 검증된 해석방법을 이용하여 수송용기 본체 및 핵연료집합체에 대한 열전달해석을 수행함으로써 방사선차폐체 및 핵연료봉에 대한 열적 건전성을 입증하였다. 또한, 수송용기의 온도상승에 따른 구조적 건전성을 평가하기 위한 열응력해석을 수행하였다.

• Journal of Energy Engineering
• /
• v.13 no.4
• /
• pp.267-274
• /
• 2004

Theoretical analysis for predicting the heat transport limitations of screen mesh wick and sintered wick heat pipes was performed. The heat pipe diameter was 8mm and water was used for working fluid. For the 250 mesh, each capillary pressures and heat transport limitations, thermal resistances were analyzed according to the operating temperatures, wick thicknesses and inclination angles, based on the effective capillary radius (r$\_$c/), porosity ($\varepsilon$) and permeability (K). The wick capillary limitation was increased as the operating temperature and the wick thickness were increased, and generally the sintered wick showed higher heat transport limitations than that of the screen wick. The thermal resistance of the screen wick was higher than that of the sintered wick and both thermal resistances were linearly increased as the wick thickness was increased.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.3
• /
• pp.17-26
• /
• 2022

Domestic district heating system needs safety management guidelines using the change of surface temperature to detect damages to buried heat pipes. This paper performed numerical analyses on the temperature change of ground surface due to the burial and leakage of heat pipes. Temperature difference between the ground surface above the buried heat pipes and the surrounding surface rises to a crescendo between 3 am and 8 am. It is more significant in winter rather than in summer. Low groundwater level magnifies the temperature increase of the ground surface by the heat pipe, which is smaller in the asphalt pavement than in the bare soil. Without leakage of the buried heat pipe, the temperature increment on the ground surface by the heat pipe is within 3.0℃ in the bare soil and 3.5℃ in the asphalt pavement. Leakage of the supply heat pipe in the bare soil increases the temperature on the ground surface gradually in the summer but rapidly in the winter. Asphalt pavement shows a lower increment and increasing rate of the temperature on the ground surface due to pipe leakage than bare soil surface. And leakage on both sides of the supply pipe takes 1-2 days for the temperature difference from the surrounding soil surface to reach 10℃.

• Journal of Energy Engineering
• /
• v.19 no.3
• /
• pp.195-202
• /
• 2010

A third of primary energy is lost as a waste heat. To improve this inefficient use of energy, systems using chemical reaction have been suggested and studied. In this study, methanol decomposition/synthesis reaction as a chemical reaction was selected for long time heat storage and long distance heat transport system because of safe, cheap and gaseous product. The purpose of this study is to find the optimal conditions in the methanol decomposition and synthesis reactions for long distance heat transport. Several parameters such as reaction temperature, pressure, $H_2$/CO ratio, space velocity, catalyst particle size were tested to find the effects on the reaction rates for the methanol synthesis. And the reaction temperature, space velocity, catalyst particle size were tested to find the effects on the production concentration for the methanol decomposition.

• Transactions of the Korean hydrogen and new energy society
• /
• v.11 no.1
• /
• pp.43-49
• /
• 2000

The heat transportation from a complex of industry to a rural area needs more efficient method because the distance between them is usually more than 10km. Conventional heat transportation using steam or hot water via pipe line has limits in transportation distance (about 3~5 km) because of the heat loss and frictional loss in the pipe line. Metal hydride can absorb or discharge hydrogen through exothermic or endothermic reaction. After releasing hydrogen from metal hydride by means of the waste heat from industry, we can transport this hydrogen to urban area via pipe line. In urban areas, other metal alloy reacts with this hydrogen to form metal hydride and produces heat for heating. Cool heat is also obtained if it is possible to use metal hydride with low reaction temperature. Therefore, metal hydride can be used as a media for transportation and storage of heat. $MmNi_{4.5}Al_{0.5}Zr_{0.003}$, $LaNi_5$, $Zr_{0.9}Ti_{0.1}Cr_{0.6}Fe_{1.4}$, $MmNi_{4.7}Al_{0.1}Fe_{0.1}V_{0.1}$ alloys were selected for this purpose and the properties of those metal hydrides were discussed. The design and control techniques were proposed and discussed for this heat transportation system using metal hydride.

• Journal of the KSME
• /
• v.22 no.5
• /
• pp.364-370
• /
• 1982

메탄화-재생반응을 화학열파이프사이클에 이용할 때 장애요인의 하나인 탄소 석출 문제는 주어진 온도에 따라 초기 주입가스 몰비를 적절히 택함으로써 피할 수 있으며 초기 주입가스 CO량에 비해 $CO_{2}$량을 줄이고 $H_{2}$량을 과잉 공급하면 넓은 온도범위에서 탄소 석출을 막을 수 있다. 메탄화-재생반응을 이용한 열수송효율은 송전효율보다 다소 떨어지나 최종으로 필요한 에너지 형태가 열인 경우, 화학열파이프 시스템을 이용하는 것이 더 유리하다고 생각한다.

• Solar Energy
• /
• v.18 no.3
• /
• pp.169-175
• /
• 1998

Metal hydrides can be used for the purpose of heat storage and transportation from the industrial complex which own recoverable waste heats to the neighboring cities by the medium of hydrogen. The properties of metal hydrides, some problems of heat transportation using metal hydrides, and the example of heat transportation system were discussed.