• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.124-124
• /
• 2000

다이아몬드에 버금가는 높은 경도뿐만 아니라 높은 화학적 안정성 및 열전도성 등 우수한 물리화학적 특성을 가진 입방정 질화붕소(cubic boron nitride)는 마찰.마모, 전자, 광학 등의 여러 분야에서의 산업적 응용이 크게 기대되는 재료이다. 특히 탄화물형성원소에 대해 안정하여 철계금속의 가공을 위한 공구재료로의 응용 또한 크게 기대된다. 이 때문에 각종의 PVD, CVD 공정을 이용하여 c-BN 박막의 합성에 대한 연구가 광범위하게 진행되어 많은 성공사례들이 보고되고 있다. 그러나 c-BN 박막의 유용성에도 불구하고 아직 실제적인 응용이 이루어지지 못한 것은 c-BN 박막의 증착직후 급격한 박리현상 때문이다. 본 연구에서는 평행자기장을 부가한 ME-ARE(Magnetically Enhanced Activated Reactive Evaporation)법을 이용한 c-BN 박막의 합성에서 적용한 증착공정 인자들의 변화에 따른 박리특성 고찰과 함께 다층박막화 및 제 3원소 혼입 방법을 적용하여 박리특성 향상 정도를 조사하였다. BN 박막합성은 전자총에 의해 증발된 보론과 (질소+아르곤) 플라즈마의 활성화반응증착(Activated Reactive Evaporation)에 의해 이루어졌다. 기존의 ARE 장치와 달리 열음극(got cathode)과 양극(anode) 사이에 평행자기장을 부가하여 플라즈마의 증대시켜 반응효율을 높였다. 합성실험용 모재로는 p-type으로 도핑된 (100) Si웨이퍼를 30$\times$40mmzmrl로 절단 후, 10%로 희석된 완충불산용액에 10분간 침적하여 표면의 산화층을 제거한 후 사용하였다. 박막실험실에서의 주요공정변수는 기판바이어스 전압, discharge 전류, Ar/N2가스유량비이었다. 합성된 박막의 결정성 분석을 FTIR을 이용하였으며, BN 박막의상 및 미세구조관찰을 위해 투과전자현미경(TEM;Philips EM400T) 분석을 병행하였고, 박막의 기계적 물성 평가를 위해 미소경도를 측정하였다. 박리특성의 고찰은 대기중에서의 자발적 박리가 일어나 90%이상의 박리가 진행된 시점까지의 시간을 측정하였고, 증착직후 박막의 잔류응력 변화와 연관하여 고찰해 보았다.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.1-8
• /
• 2008

The study is to perform numerical analysis of train fire characteristics in an underground subway tunnel, depending the different locations of ventilation facility. To study the characteristics of train fire, two kinds of worst-case scenarios are selected, based on escape distance, escape time, and fire zone, and trends and thermal environments of tunnel are analyzed by changing the locations of ventilation facility for times. Fire characteristics is calculated by using FLUENT v.6.3.26, and turbulent flow is calculated by using the standard k-${\varepsilon}$ model. The numerical results show distribution of carbon monoxide concentration, temperature, and velocity. The results of this study will contribute to building the most suitable ventilation systems when designing subway stations and tunnels.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.82-91
• /
• 1998

액정고분자/폴리카보네이트 혼합계로 구성된 분자복합계를 쉬트상으로 가공할 때 취 약해지기 쉬운 횡단면 방향의 물성을 향상시키기 위하여 미세섬유상의 배향을 in-situ 상태 로 적절히 제어할수 있는 Simultaneous Convergent-Divergent(SCD) 다이를 설계·제작하 고 압출실험을 수행하여 얻은 압출 쉬트를 대상으로 구조-물성-가공의 상관관계를 조사하 였다. 액정고분자의 첨가 함량에 따른 토오크와 토출량의 변화는 액정고분자를 10wt% 소량 첨가하였음에도 현저한 감소 효과를 보였으며 약 30wt%일 때 최소로되었다. 이는 액정고분 자가 보강 기능외에 가공특성의 개선에도 큰 효과가 있어 가공조제로서의 가능성을 보이는 결과로 혼합계의 유변학적 특성 결과에서도 확인할수 있었다. 또 DSC와 DMA를 이용한 열 분석 결과 액정고분자의 함량이 증가함에 따라 PC의 유리전이온도가 다소 감소하는 현상을 보임에 미루어 이 혼합계는 부분적으로 상용성을 갖는 것으로 볼수 있으며 모폴로지 분석을 통해서도 이를 확인할수 있었다. TLCP/PC 혼합계로 구성되는 분자복합재를 SCD 다이를 사용하여 제조한 압출 쉬트의 방향성에 따른 기계적 물성은 기존의 쉬트 다이보다 흐름방향 으로는 다소 낮은 물성치를 보이지만 횡단면 방향으로는 물성이 현저히 향상됨을 관찰할수 있었다. 모폴로지 분석결과 기존의 쉬트 다이의 경우 벽면 부근에서는 액정고분자가 미세섬 유상으로 형성되어 흐름방향으로 배향되어 있지만 중심부에서는 액정 상태로 존재하는 반 면, SCD 다이의 경우 미세섬유상으로 형성된 액정고분자가 벽면에서부터 중심부로 갈수록 횡단면 방향으로 서서히 배향되어 있음을 확인할수 있었다.

• Journal of Korea Technology Innovation Society
• /
• v.9 no.1
• /
• pp.1-25
• /
• 2006

Technological innovation is being recognized as a core capability of competitive advantage for sustainable growth of a company. In this regard, lots of research activities have been conducted on technological innovation and performance at firm level. Ihis study empirically investigates those relationship with cross-sectional and time-series data according to firm-specific characteristics along industry. Patent intensity, R&D intensity, and intangible asset intensity smoothing by firm size are used as proxy measures for explanation of performance with net income per employee. As a result with 162 high-tech firms for 11 years, it was found that high performances were positively related to patent and R&D intensity. Also, firms classified into 8 categories based on firm-specific technological innovation characteristics show difference upon performances. To sum up, firms that have high patent and R&D intensity demonstrate high performance compared to other firms.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.266-274
• /
• 2014

To extend the understanding of the pyrolysis mechanism of wood, we have investigated wood dust charcoal and condensate of volatile organic compounds (VOC) obtained during the pyrolysis of red pine (Pinus densiflora Sieb. et Zucc.) at $180{\sim}450^{\circ}C$ using elemental analysis, IR and GC/Mass. The effect of activation process on the charcoal structure also has been studied by comparing elemental analysis and IR data of charcoal carbonated at $600^{\circ}C$ and charcoals activated at $750^{\circ}C$. The results show that pyrolysis of wood has mainly started near at $240^{\circ}C$ and its chemical components did not changed much up to $270^{\circ}C$. However, the element contents and IR spectra drastically changed at $300^{\circ}C$. The fact that IR peaks related to the aromatic ring of lignin are observed in the charcoal pyrolized at $450^{\circ}C$ indicates that a small part of lignin still remains at this temperature. The chemical structure of the activated charcoal seems almost unaffected by the activation time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.220-230
• /
• 1992

Soil temperature is one of the important environmental factors which control all the physical, chemical and biological processes in soil including germination and root growth of plants and other organisms living in the soil ecosystem. Soil water and nutrient availability and mobility are temperature dependent. Soil temperature change is depended primarily upon energy exchange in soil surface, meteorological variance and physical properties of the soils which are closely related to heat transfer mechanism. In this study physical properties including bulk density, soil texture and organic matter content were measured and thermal diffusivity on the soils was calculated. Soil samples from the 66 meteorological stations under the Korea Meteorology were collected and the physical parameters were measured. To obtain relationship between thermal diffusivity and soil water content a heat probe thermal diffusivity measurement apparatus was designed and used in this experiment. According to the survey on soil physicsal properties on the 66 meteorological stations, the 52% of the surface soil texture were sandy loam and laomy sand or sand, 38% were loam and silty loam, and 10% were clay loam and silty clay loam. The bulk density which was closely related with thermal properties showed average of $1.41g/cm^3$ for sandy soils, $1.33g/cm^3$ for loam and silty loam soils, and $1.21g/cm^3$ for clay loam and silty clay loam soils. The apparent thermal diffusivity of the upper layer from 0 to 30cm ranged from 1.16 to $8.40{\times}10^{-3}cm^3/sec$ with average of $3.53{\times}10^{-3}cm^3/sec$. The apparent thermal diffusivities of the Jeju soils of which organic matter contents were high and the bulk densities were low were near $2{\times}10^{-3}cm^3/sec$. The thermal diffusivity of snow measured in Chuncheon ranged from 0.822 to $2.237{\times}10^{-3}cm^3/sec$. The damping depth calculated from the thermal diffusivity ranged from 5.92 to 13.65cm for daily basis and 124 to 342cm for yearly basis. The significant regression equation to estimate thermal diffusivity with bulk density and soil water content was obtained by the heat probe in laboratory.

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.304-311
• /
• 2010

Near Infrared Spectroscopy (NIRs) has been applied for rapid and nondestructive paper measurement by replacing the current destructive method to the property of paper. Current standard methods for the property of paper were pH, moisture, breaking length, and folding endurance, which data were compared with spectrum of FT-NIR spectrometer. Various paper products such as copy, envelope, white, newspaper, as well as old paper produced around 1960~1980 were used as the sample. The correlation ($R^2$) and standard error of prediction (SEP) results for breaking length, folding endurance, moisture and pH are $R^2$=0.914, SEP=0.508, $R^2$=0.926, SEP=0.281, $R^2$=0.941, SEP=0.931, pH $R^2$=0.949, SEP= -0.0631, respectively. This result show that NIRs can be applied to practical application for nondestructive analysis of paper records materials.

• Journal of the Korean Society for Library and Information Science
• /
• v.44 no.4
• /
• pp.353-371
• /
• 2010

Library anxiety has been recognized as one of the representative fields that concerns user's affectivity in library and information study. Considerable library users have been discovered to experience library anxiety according to researches. Although digital libraries are becoming more popular changing drastically from traditional libraries, few studies have addressed the measurement of digital library anxiety(DLA). The purpose of this study is to develop and validate a multidimensional digital library anxiety scale(DLAS) based on previous research in library anxiety and digital libraries. It will become possible to define the construct of DLAS, provide its underlying dimensionalities, and find out how much they explain the construct. Through the exploratory factor analysis, DLAS has been developed with 39 items representing seven distinct factors which were interpreted as affect, resources, know-how, security, language, technology, and task explaining 51.165% of DLA. Also, DLAS' characteristics about demographic variables and use pattern were found through the T-test and ANOVA analysis for each factor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.43-48
• /
• 2010

The heat sink system for a main board in a network server computer is built on printed circuit board by an anchor structure, mounted by eutectic SnPb solder. The solder creeping is caused by a constant high temperature condition in the computer and it eventually makes fatal failures. The FE model is used to calculate the stress and predict the life of soldered anchor in the computer. In the model, Anand constitutive equation is employed to simulate creep characteristics of solder. The creep test is conducted to verify and calibrate the solder model. A special jig is designed to mitigate the flexure of printed circuit board and to get the creep deformation of solder only in the test. Test results are compared with analysis and calibration is conducted on Anand model's constants. Precise life prediction of soldered anchor in creep condition can be performed by this model.

• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.23-30
• /
• 2008

In this paper, when the silk fabric was modified by ethylene cyanohydrine, the reaction mechanism between both was studied at various treatment conditions such as curing temperatures and times, ethylene cyanohydrin concentrations and $ZnCl_2$ concentrations. Through the FT-IR and DSC analyses of the treated silk fabrics, we found the results as follows : It was observed in FT-IR analysis of the treated silk fabrics that the -OH characteristic peak($3,450cm^{-1}$)position and shape were all changed when drying and curing treatment conditions were at $80^{\circ}C$ for 3 minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the $ZnCl_2$ was 0.1%. It indicated that the -OH group of the silk participated in the reaction between the silk fabric and ethylene cyanohydrin. From the DSC analysis, it was found that the pyrolysis temperatures of the treated silk fabrics by ethylene cyanohydrin which was processed in the same condition, were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$. From the FT-IR analyses of the silk fabrics treated by ethylene cyanohydrin at the various concentrations of $ZnCl_2$, it was found that the -OH characteristic peaks($3,450cm^{-1}$) were similar to the nontreated one except that of the fabric treated at the $ZnCl_2$ conconcentration of 0.8% when drying and curing treatment conditions were at $80^{\circ}C$ for 3minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the ethylene cyanohydrin was 5%. In the case of the $ZnCl_2$ concentration of 0.8% solution, a lot of change were observed in peak. From the DSC analysis of the treated silk fabrics which was processed in the same condition, it was showed that the pyrolysis temperatures of treated silk fabric were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$, which was no relation with the concentration of $ZnCl_2$.