• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.1-7
• /
• 2004

Roads, like bikeways, parkways and walks, are to be just capable of supporting light traffic and traveling public, but they are required to be human friendly and environmental-oriented. Lately soil-solidifier mixture, a kind of soil-cement, has developed and has been applied to the recycling and environment-oriented pavement as the surfacing material. Soil-solidifier pavement structure has been designed by only experience. To design this pavement mechanically, it is necessary to find out basic engineering properties of soil-solidifier mixture. This study focuses on finding out mechanical characteristics of the mixture according to mixture proportions and aging. Test molds with various mixture proportions are made, and then unconfined strength tests are performed for test molds with aging of the mixture. As the result of this study, it is found that the strength of the mixture increases with amount of cement and that maximum strength is achieved at 6%$\sim$8% of the ratio of solidifier and water. The strength increase rapidly until 14 days, after then slowly. After 28 days the strength of the mixture approaches to the constant value. The heat of hydration during curing of the mixture is measured no significantly. It also shows that temperature characteristics of the mixture is similar to that of soil. Since this mixture is mixed with soil and is able to improve engineering problems in pavement due to temperature, this mixture is expected to use effectively in the environment-oriented pavement for light traffic.

• Composites Research
• /
• v.16 no.1
• /
• pp.1-12
• /
• 2003

This study developed SiC$_{p}$/A1$_2$O$_3$$_{f}$/Al composites for electronic packaging to which reinforcements were added with the volume fractions of 49%, 56% and 63% by the squeeze casting method. 0.8 wt. % of the inorganic binder as well as the A1$_2$O$_3$ fiber and SiC Particles with the volume fraction of 1:10 were added to the composites, which were produced in the newly designed mold. For the produced SiC/Al composites, the CTEs (coefficients of thermal expansion) were measured from 30 to 300 and compared with the FEM numerical simulation to analyze the temperature dependent properties. The experiment showed the CTEs of SiC$_{p}$/A1$_2$O$_3$$_{f}$/Al composites that were intermediate values of those of Rule of Mixture and Turner's Model. The CTEs were close to Turner's Model in the room temperature and approached the Rule of Mixture as the temperature increases. These properties analyzed from the difference of the average stress acting between the matrix and the reinforcements proposed in this study.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.565-577
• /
• 2016

The objective of this study is to propose a method for computing the Natural Drought Index (NDI) that does not consider man-made drought facilities. Principal Component Analysis (PCA) was used to estimate the NDI. Three monthly moving cumulative runoff, soil moisture and precipitation were selected as input data of the NDI during 1977~2012. Observed precipitation data was collected from KMA ASOS (Korea Meteorological Association Automatic Synoptic Observation System), while model-driven runoff and soil moisture from Variable Infiltration Capacity Model (VIC Model) were used. Time series analysis, drought characteristic analysis and spatial analysis were used to assess the utilization of NDI and compare with existing SPI, SRI and SSI. The NDI precisely reflected onset and termination of past drought events with mean absolute error of 0.85 in time series analysis. It explained well duration and inter-arrival time with 1.3 and 1.0 respectively in drought characteristic analysis. Also, the NDI reflected regional drought condition well in spatial analysis. The accuracy rank of drought onset, termination, duration and inter-arrival time was calculated by using NDI, SPI, SRI and SSI. The result showed that NDI is more precise than the others. The NDI overcomes the limitation of univariate drought indices and can be useful for drought analysis as representative measure of different types of drought such as meteorological, hydrological and agricultural droughts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.49-49
• /
• 1999

리튬 이차 전지를 박막화함으로써 개발된 고상의 마이크로 박막전지는 임의의 크기 및 형태로의 제작이 가능하며 액체전해질을 사용하지 않기 때문에 작동 중 열 또는 기체 생성물이 생기지 않아 높은 안정성을 갖으며 광범위한 사용 온도 범위를 가진다. 위와 같은 장점으로 인하여 충전 가능한 고상의 박막형 리튬 이차 전지는 점진적으로 그 사용 범위가 크게 확대될 것으로 판단된다. 즉, 초소형 전자, 전기 소자는 물론이며 조만간 실현될 스마트 카드, 셀루러폰 및 PCS와 같은 개인용 휴대 통신장비의 전력 공급계로의 응용이 가능할 것이다. 특히 장수명, 고에너지 밀도를 갖는 초소형의 전지를 필요로 하는 microelectronics, MEMS등에 이용될 수 있는 이차전지에 대한 요구가 점점 가시화 됨에 따라 박막공정을 이용한 이차전지개발기술이 요구되고 있으며, 박막제조기술을 이용한 고상의 박막형 및 전지에 관한 연구가 증가하고 있다. 본 연구에서는 박막형 리튬 이차전지의 Cathode 물질로써 비정질의 산화바나듐 박막을 반응성 스퍼터링에 의하여 상온에서 증착하였다. 박막형 이차전지의 여러 가지 Cathode 물질중 산화바나듐은 다른 물질들과는 달리 비정질 형태로 매우 우수한 충방전 특성을 나타낸다. 이런 특성으로 인해 다소 전지자체의 성능은 낮지만 저전력 저전압을 필요로 하는 초소형 전자 소자와 혼성되어 이용할 수 있는 잠재성이 매우 높은 물질이다. 바나듐 타겟의 경우 타겟 표면의 ageing에 따라 증착되는 박막의 특성이 매우 달라지게 되므로 presputtering의 시간을 변화시키면서 실험하였다. 또한 스퍼터링 중의 산소의 분압도 타겟의 ageing에 많은 영향을 주므로 실험 변수로 산소분압을 변화시키면서 실험하였다. 증착된 산화바나듐 박막의 표면은 scanning electron microscopy로 분석하였으며 구조 분석은 X-선 회절분석, X-ray photoelectron spectroscopy 그리고Auger electron spectroscope로 하였다. 증착된 산화바나듐 박막의 전기화학적 특성을 분석하기 위하여 리튬 메탈을 anode로 하고 EC:DMC=1:1, 1M LiPF6 액체 전해질을 사용한 Half-Cell를 구성하여 200회 이상의 정전류 충 방전 시험을 행하였다. Half-Cell test 결과 박막의 결정성과 표면상태에 따라 매우 다른 전지 특성을 나타내었다.

• Analytical Science and Technology
• /
• v.10 no.3
• /
• pp.209-215
• /
• 1997

Li-AGICs as a anode of secondary battery were synthesized by high-pressure method as a function of the Li-contents. The characteristics of these prepared compounds were determined from the studies with X-ray diffraction method, UV/VIS spectrophotometric and differential scanning calorimeter(DSC) analysis. From the results of X-ray diffraction, it was found that the lower stage intercalation compounds were formed with increase of Li-contents. The mixed stages in these compounds were also observed. In the case of the $Li_{30wt%}$-AGIC, the compounds in the stage 1 structure were formed predominantly, but the structure of only pure stage 1 for structural defect of artificial graphite is not observed. According to UV/VIS spectrophotometric analysis, $Li_{30wt%}$-AGIC shows distinguishable energy state spectrum with the position of $R(%)_{min}$ values, but the characteristic spectra of almost all Li-AGICs are not observed. The enthalpy and entropy changes of the compounds can be obtained from the differential scanning calorimetric analysis results. From the results, it was found that exothermic and endothermic reactions of Li-AGICs are related to thermal stability of lithium between artificial graphite layers.

• Journal of Korea Water Resources Association
• /
• v.38 no.2
• /
• pp.111-119
• /
• 2005

The climatological characteristics of the area averaged monthly precipitation over the Han- and Nakdong-river basins were investigated. The data used for this study is monthly precipitation data from 51 meteorological stations for the period of 1954 to 2002. The magnitude of area averaged precipitation in the Han-river basin was about 10% larger than that in the Nakdong-river basin. However, the variability of two monthly precipitation time series exhibited similar characteristics: April precipitation tends to decrease and August precipitation increase significantly, while there was no significant trend for the other months. There were some indications of abrupt change around the 1970's in the periodicity of precipitation and relationship with El Nino index. September precipitation showed negative correlation with NINO3 index but November precipitation, positive correlation with NINO3 index, indicating a possible connection with the global-scale phenomena.

• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.125-133
• /
• 2022

This study attempted to find out whether learning time has a mediating effect according to the gender, region, and grade of middle school students in the relationship between academic engagement and self-esteem. To this end, a survey of 1,045 middle school students in Gyeongsangnam-do was conducted on academic engagement, learning time, and self-esteem. Difference verification was conducted to determine the difference in academic engagement, learning time, and self-esteem according to the general characteristics of the study subjects, correlation analysis was conducted to determine the correlation between major variables, and regression analysis was conducted to verify the mediating effect of learning time. As a result of the analysis, first, there was no difference in the academic engagement of middle school students by group. In the learning time, middle school students in the city area were significantly higher than those in the township area, male students had higher self-esteem than female students, and students in the city area had significantly higher self-esteem as the grade went up. Second, as a result of correlation analysis, learning time, academic engagement, and self-esteem showed a positive correlation. Third, in the entire group not divided by group, both the direct path through which academic engagement reaches self-esteem and the partial mediating model from learning time to self-esteem showed significant effects. In the analysis by gender, only female students excluding male students showed a partial mediating effect, and the analysis results by region showed a partial mediating effect only on students in the city. The analysis results by grade showed a partial mediating effect only for second-year middle school students. In order to improve the self-esteem of middle school students, education and counseling should be conducted in consideration of not only individual differences by gender and grade, but also the region in which they live.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.377-382
• /
• 2014

Analysis techniques of the data over time from the mobile environment and IoT, is mainly used for extracting patterns from the collected data, to find meaningful information. However, analytical methods existing, is based to be analyzed in a state where the data collection is complete, to reflect changes in time series data associated with the passage of time is difficult. In this paper, we introduce a method for analyzing multi-block streaming data(AM-MBSD: Analysis Method for Multi-Block Stream Data) for the analysis of the data stream with multiple properties, such as variability of pattern and large capacitive and continuity of data. The multi-block streaming data, define a plurality of blocks of data to be continuously generated, each block, by using the analysis method of the proposed method of analysis to extract meaningful patterns. The patterns that are extracted, generation time, frequency, were collected and consideration of such errors. Through analysis experiments using time series data.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.1
• /
• pp.5-14
• /
• 2018

All kinds of monitoring data in construction site could have outlier created from diverse cause. In this study generation technique of synthesis value, its regression, final outlier detection and assessment are conducted to distinct outlier data included in extensive time series dataset. Synthesis value having weight factor of correlation between a number of datasets consist of many monitoring data enable to detect outlier by increasing its correlation. Standard artificial dataset in which intentional outliers are inserted has been used for assessment of synthesis value technique. These results showed increase of detection accuracy for outlier and general tendency in case of having different time series models in common. Accuracy of outlier detection increased in case of using more dataset and showing similar time series pattern.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.4
• /
• pp.343-349
• /
• 2007

The reduced scale fire test provides basic data but it is not enough to analysis real fire problem directly because there is no exact analogy theory between a real fire and the reduced scale model. Therefore we have developed the large scale calorimeter in order to the real scale fire test. This advanced large scale calorimeter used for physical properties such as a heat release rate, based upon consumption of $O_2$ method. Using this large scale calorimeter, we cameo out the real scale vehicle fire test in order to evaluation for heat release rate. We obtained the calculated result for HRR $2.3{\sim}3.4\;MW$ and this result is very similar to the PIARC candidate HRR. It is approve that this facility has the reliability and it is capable of applying to the advance fire research in the future.