• Journal of the Microelectronics and Packaging Society
• /
• 제13권3호
• /
• pp.39-45
• /
• 2006

This study was investigated the thermal properties of underfill with various epoxy resins using thermal analysis methods such as differential scanning calorimetry (DSC), thermo gravimetry analysis (TGA), dynamic mechanical analysis (DMA) and thermo-mechanical analysis (TMA). And, the adhesion strength of the underfills/FR-4 substrate was evaluated. The glass transition temperature (Tg) of underfill which was composed the cycolaliphatic epoxy resin was lower than that of underfill which was not composed the cycolaliphatic epoxy resin. The thermal degradation of underfill was composed of two processes, which involved chemical reactions between the degrading polymer and oxygen from the air atmosphere. The coefficient of thermal expansion (CTE) of underfill which was composed the cycolaliphatic epoxy resin was higher than that of underfill which was not composed the cycolaliphatic epoxy resin. The excessive curing temperatures caused a weak boundary layer of epoxy resin, which resulted in a deterioration of mechanical properties in the epoxy resin and thus led to poor adhesion property between the underfill/FR-4 substrate.

• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.663-666
• /
• 2009

본 논문에서는 폭발법에 의해 합성된 나노다이아몬드의 열분해 및 연소특성에 대해 조사하였다. 나노 다이아몬드의 열분해 및 연소는 열중량 분석장치를 이용하여 측정하였으며, 소성된 나노다이아몬드의 표면 및 결합구조는 XRD, FT-IR, SEM-EDAX를 이용하여 측정하였다. 열분해 조건에서 나노다이아몬드는 $105{\sim}210^{\circ}C$와 $400^{\circ}C$ 부근에서 2중 피크가 나타난다. 또한 연소분위기하에서는 $420^{\circ}C$와 $490^{\circ}C$에서 2중 피크가 나타난다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.229-229
• /
• 2013

저온작동형($500{\sim}700^{\circ}$) 고체산화물 연료전지의 전해질 재료의 응용이 기대되는 Gd doped ceria를 고주파 유도결합 열플라즈마 법으로 합성하고 그 특성을 조사하였다. 본 연구에서는 나노 ㄴCeO2 10~100 um의 CeO2와 1~20 um의 Gd2O3를 Ce：Gd이 9:1 mol%와 8:2 mol%의 비율로 혼합한 선구체를 140 kVA의 RF plate power와 O2/Ar 플라즈마 생성 가스 조건에서 형성된 고주파 유도결합 열 플라즈마에 주입하여 ~50 nm 이하의 입도와 fluorite 구조의 결정화된 CeO2 구조를 갖는 Gd doped ceria 나노 분말을 합성하였다. FE-SEM, TEM, XRD, ICP-OES, EDS, BET분석법을 이용하여, 합성된 분말의 입도, 미세구조, 결정 구조, 조성, 표면 등의 특성을 관찰하였다.

• Journal of the Korean Chemical Society
• /
• 제41권10호
• /
• pp.524-534
• /
• 1997

Analysis of additives in cured rubber is often a difficult task for analytical chemists because of a wide variety of complex components. Conventional analyses of additives and rubbers have been done in multistep, off-line processes with large sample size and extensive sample preparations. The coumarone-indene resin, resorcinol-formaldehyde resin, and prevulcanization inhibitor have been characterized by their pyrolysis pathways and mass spectra of characteristic pyrolyzates. Pyrolysis Gas Chromatography/Mass Spectrometry (Py-GC/MS) was used in the identification of additives without any sample pretreatment. This result shows that several organic additives in cured rubber can be directly analyzed.

• The KIPS Transactions:PartD
• /
• 제17D권6호
• /
• pp.463-470
• /
• 2010

We presented a very fast and robust method of text line segmentation based on the DCT blocks of color image without decompression and binary transformation processes. Using DC and another three primary AC coefficients from block DCT we created a gray-scale image having reduced size by 8x8. In order to detect and locate white strips between text lines we analyzed horizontal and vertical projection profiles of the image and we applied a direct markov model to recover the missing white strips by estimating hidden periodicity. We presented performance results. The results showed that our method was 40 - 100 times faster than traditional method.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권5호
• /
• pp.323-329
• /
• 2003

The present study was carried out to evaluate the postoperative results of Millard rotation-advancement repair (MR) and lip adhesion followed by Millard rotation-advancement repair (LAMR) in unilateral complete cleft lip. Twenty patients with unilateral complete cleft lip underwent MR or LAMR at the Department of Oral and Maxillofacial Surgery of Chonnam University Hospital over a period of 6 years (January 1994 to December 1999) were analyzed. The surgical results following the operation were assessed on the basis of scoring, vertical lip length, and scar hypertrophy. The mean score was better in LAMR group ($74.74{\pm}1.09$, n=13) than in MR group ($66.50{\pm}1.14$, n=7) for both lip and nose segments. Scar hypertrophy developed in MR group with 28.6% and in LAMR group with 23.1%. No significant difference was noted in the ratio of lip length between LAMR and MR groups ($0.84{\pm}0.08\;and\;0.73{\pm}0.10$). These results suggest that LAMR is better than MR in repairing the unilateral complete cleft lip.

• Transactions of the Korean hydrogen and new energy society
• /
• 제29권1호
• /
• pp.25-31
• /
• 2018

To apply Sievert's type apparatus to thermal analysis of hydrogen absorption materials, the dehydrogenation of $LaNi_5$ system was investigated. As the initial wt% of hydrogen was increased from 0.44 to 1.24 wt%, the peak temperature of evolution rate shifted to higher temperature. However, with the initial wt% of hydrogen higher than 0.95 wt%, the peak temperature of evolution rate did not change. As the heating rate was increased, the peak temperature increased; the peak temperatures for heating rates 0.5, 1.0 and 1.5 K/min were 262.2, 264.1, and 265.9 K respectively. The Sievert's type automatic apparatus can be successively applied to the thermal analysis of $LaNi_5$ hydride.

• Korean Journal of Materials Research
• /
• 제5권6호
• /
• pp.709-709
• /
• 1995

원거리 플라즈마 화학증착법을 이용하여 저온에서 이산화규소박막을 제조하였다. 본 연구 에서는 공정변수인 기판의 온도, 반응기체의 조성 및 분압과 플라즈마 전력에 따른 산화막의 재료적인 물성을 평가하였다. XPS결과에서 산화막은 양론비(O/Si=2)보다 약간 적어 실리콘이 많이 함유된 막으로 나타났다. 이 경우 굴절율과 ESR분석에 의해 미결합된 실리콘의 양이 증가함을 알 수 있었다. SIMS분석에 의해 미량의 질소성분이 계면에 존재하는 것과 실리콘 미결함을 관찰하였다. FT-IR로부터 막내 수소량을 정량화하였으며 결합각 분포는 200℃이상에서 열산화막과 비슷한 값을 얻었다. 하지만 열산화막에 비해 높은 식각율을 보여 계면 스트레스에 의해 막내의 결합력이 약해진 것으로 생각된다.

• Journal of the Korean earth science society
• /
• 제25권7호
• /
• pp.629-636
• /
• 2004

In order to study developments of the marine atmosphere boundary layer in cloud incoming, important parameters like heat advection, surface layer heat flux, and radiation energy were estimated using the rawinsonde, AWS data, satellite images, and buoy data which was installed at the East Sea. We explained the variation and the development of mixed layer in terms of surface layer heat flux and long wave radiation under the cloudy sky. The heat flux was obtained by means of the bulk method. Conservation of heat was analysed by heat budget equation, which was consist of buoy data in the East sea, and sounding data at Ulleungdo and at Pohang. During the inflow of cloud, radiative cooling at the surface after was suppressed and long wave radiation from cloud played a role of warming. The surface layer temperature was also remained warm by influence of warm advection from south-easterly direction. The air temperature in night was increased, as a result, mixed layer was not destroyed and The nocturnal boundary layer was composed of the mixed layer and the residual layer.

• Convergence Security Journal
• /
• 제11권3호
• /
• pp.19-24
• /
• 2011

Software failure time presented in the literature exhibit either constant monotonic increasing or monotonic decreasing, For data analysis of software reliability model, data scale tools of trend analysis are developed. The methods of trend analysis are arithmetic mean test and Laplace trend test. Trend analysis only offer information of outline content. In this paper, we discuss forecasting failure time case of failure time censoring. In this study, time series analys is used in the simple moving average and weighted moving averages, exponential smoothing method for predict the future failure times, Empirical analysis used interval failure time for the prediction of this model. Model selection using the mean square error was presented for effective comparison.