• Title/Summary/Keyword: 열매체

Search Result 116, Processing Time 0.024 seconds

노니(Morinda citrifolia L.) 부정근의 효능평가와 지표물질 탐색

  • Kim, Myeong-Gi
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2018.04a
    • /
    • pp.7-7
    • /
    • 2018
  • Morinda 속 식물은 꼭두서니과(Rubiaceae)에 속하는 다년생 상록관목으로서 전세계 80여종이 분포하고 있다. 그중 노니는 2000년 전부터 동남아시아 지역에서 식품, 향신료, 음료, 자양강장제 등 다양한 분야에 사용되고 있으며 뿌리, 줄기, 잎, 열매의 식물체 전체 부위가 이용되고 있다. 특히 열매는 주스 등 다양한 제품으로 만들어지고 있다. 본 연구는 조직배양된 노니 부정근을 재료로 하여 항알러지의 효능평가를 수행하고 지표물질로 rubiadin을 선정하였으며 이물질에 대한 정제방법 및 구조분석을 통해 정성, 정량적 분석방법을 확립하였다. 항알러지 효능에 대한 측정 결과 노니 부정근 조추출물 $100{\mu}g{\cdot}mL^{-1}$에서 약 85%의 높은 발현 억제 효과를 보였고 이를 분획 추출한 후 분획물별로 histamine 및 $TNF-{\alpha}$ 발현 억제효과를 측정한 결과 헥산 및 메틸렌클로라이드층 분획물에서 효과가 우수하였다. 노니 부정근 조추출물이 함유한 유효성분들 중 항알러지 효과를 나타내는 지표물질을 선정하기 위하여 용매분획을 실시한 후 preparative LC로 분취하여 항알러지 효과가 높은 분획물을 얻었다. HPLC로 분취한 화합물을 GC/MS/MS, LC/MS-IT-TOF, UV/VIS spectrophotometer를 이용하여 최종적으로 rubiadin을 확인하고 이 화합물을 지표물질로 선정하였다. 이러한 결과는 노니 부정근의 고부가가치 기능성 소재로 이용되는데 도움이 될 것으로 기대한다.

  • PDF

Design of Large Capacity Clean Air Heater (대용량 청정 공기 가열 장치 설계)

  • Kim, Jeong-Woo;Jung, Kwang-Soo;Jeon, Min-Joon;Lee, Kyu-Joon
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.115-118
    • /
    • 2010
  • 2 Types of heater (Vitiated Type, Clean Air Type) in order to increase the temperature for a test are used for industry. In this report, large capacity clean air type heater was designed. Heater capacity and LNG consumption rate can be calculated by the air mass flow and heater inlet/outlet temperature. The heater is composed by Burner, Furnace, Heat Exchanger, and Stack. The hot air from the burner and cold air from the tube inlet exchange their heat indirectly in the heat exchanger, so the desired temperature can be achieved at the exit of the tube.

  • PDF

Experimental Study on the Heat Transfer Characteristics of the Solar Hot Water Storage Tank (태양열 축열조 열전달 특성에 관한 실험적 연구)

  • 엄태인;강용혁;유창균;곽희열;문승현;윤현식;조재광;나은수
    • Journal of Energy Engineering
    • /
    • v.10 no.1
    • /
    • pp.24-32
    • /
    • 2001
  • 본 축열탱크 열전달에 관한 실험적 연구는 국내에서 개발하고 있는 태양열 온수기용으로 현재 널리 이용되고 있는 탱크-코일 방식의 문제점을 해결하면서 열전달 효율이 높은 2중 축열탱크를 개발하기 위한 것이다. 2중 축열탱크의 용량은 100리터로서 수평 및 수직형으로 설치하여 실험이 가능하도록 설계.제작하였고 탱크내부의 온도는 길이방향 및 반지름 방향으로 각각 등간격으로 설치하여 측정하였고 집열매체의 입.출구온도를 동시에 측정하였다. 실험결과는 (1) 축열탱크의 형태에 관계없이 축열탱크와 열교환을 하는 열매체의 유량이 증가할수록 열전달량은 증가한다. (2) 축열탱크의 형태에 따른 탱크내부 물의 온도 상승속도는 수직형(b)인 경우가 가장 크고, 그 다음 수직형(a), 수평형의 순으로 나타났다. 따라서 이중탱크형의 축열탱크는 수평형 보다 수직형이 동일한 용량의 축열매체 온도를 신속히 상승시킬 수 있다. 아울러 열성층화에 의하여 고온의 축열매체를 이용할 경우 수직형 축열탱크가 더욱 우수한 결과를 나타낸다. (3) 축열탱크 열전달계수(UA) 값은 ( $T_{in}$ - $T_{out}$)/$\Delta$ $T_{m}$ 의 크기에 좌우되며, 열전달계수를 설치방법에 따라 비교하면 수직형(b)>수직형(a)>수평형의 순서로 나타났다.다.

  • PDF

Development of an Irradiation Device for High Temperature Materials in HANARO (하나로에서의 고온재료 조사장치 개발)

  • Cho, Man Soon;Choo, Kee Nam
    • Journal of the Korean Society of Mechanical Technology
    • /
    • v.13 no.2
    • /
    • pp.145-153
    • /
    • 2011
  • The irradiation tests of materials in HANARO have been performed usually at temperatures below $300^{\circ}C$ at which the RPV(Reactor Pressure Vessel) materials of the commercial reactors such as the light water reactor and CANDU are operated. As VHTR(Very High Temperature Reactor) and SFR(Sodium-cooled Fast Reactor) projects are being carried as a part of the present Gen-IV program in Korea, the requirements for irradiation of materials at temperatures higher than $500^{\circ}C$ are recently being gradually increased. To overcome the restriction in the use at high temperature of the existing Al thermal media, a new capsule with double thermal media composed of two kinds of materials such as Al-Ti and Al-graphite was designed and fabricated more advanced than the single thermal media capsule. At the irradiation test of the capsule, the temperature of the specimens successfully reached $700^{\circ}C$ and the integrity of Al, Ti and graphite material was maintained.

Utilization of Opuntia ficus-indica as a Substrate for the Growth of Mushroom Mycelia and the Functional Properties of its Culture Extracts (버섯균사체 배양기질로서의 손바닥선인장의 활용과 그 배양추출물의 기능적 특성)

  • Moon Sang-Wook;Park Soo-Yeong;Choi Soo-Youn;Hwang Joon-Ho;Jang Mi-Kyoung;Jin Yeong-Jun;Chung Wan-Seok;Kim Se-Jae
    • Journal of Life Science
    • /
    • v.16 no.3 s.76
    • /
    • pp.477-484
    • /
    • 2006
  • This study was performed to know the potentialities of the fruits of Opuntia ficus-indica, as a medium for mushroom mycelial culture. Five mushroom mycelial (Agrocus blazei, Grifola frondosa, Hericium erinaceum, Innonotus obliquus, Phellinus linteus) were frown on the malt extract broth (MEB) and the cactus broth medium (CB). The submerged culture mixtures were extracted using equal volume of ethyl acetate, and their extract yields, total polyphenol contents, and some physiological activities were compared with each other Each extract from mycelial culture grown on CB medium showed remarkable enhancement in physiological activities compared with each counterpart grown on MEB. Among five mycelial cultures grown on CB medium, the extract yield and polyphenyl content were highest in the extract from Grifola frondosa (extract yield, 0.4 g/L and polyphenol content, 22.7%). Also, the extracts from Grifola frondosa showed the highest physiological activities, such as DPPH radical scavenging ($IC_{50}=362.9{\mu}g/ml$), xanthine oxidase inhibition (about 80% at $500{\mu}g/ml$), and superoxide radical scavenging (about 80% at $500{\mu}g/ml$), and NO production inhibition ($IC_{50}=43.1{\mu}g/ml$) in LPS-stimulated RAW 264.7 cells. This result suggests that the fruit of Opuntia ficus-indica can be used as a culture medium for improving the functional properties of various mushroom mycelia.

Evaluation on Performance of Hybrid Heating System with Solar Collector of Thermosyphon Tube Type (열사이폰관형 태양열집열기를 주열원으로 하는 하이브리드 난방시스템 성능 평가)

  • Chun, Tae-Kyu;Yang, Young-Joon
    • Journal of Energy Engineering
    • /
    • v.21 no.4
    • /
    • pp.356-361
    • /
    • 2012
  • Recently, even though the researches on renewable energy like geothermal, wind, solar energy have been performed widely, its use-rate in total energy is still low. This study was carried out to investigate the performance of hybrid heating system, which consisted of solar collector of thermosyphon tube type and X-L pipe boiler. Especially, new type of solar collector was tried and compared with double tube type and, futhermore, performance and safety on X-L pipe boiler were investigated. As the results, efficiency of solar collector of thermosyphon tube type was higher 20.7% than that of double tube type, mainly due to its structural characteristics. It was also confirmed that temperature of special heat medium used X-L pipe boiler rose up about 20% rapidly in comparison with that of pure water.

Program for Process and System Design of Continuous Sterilizer (연속살균 공정 및 장치 설계 프로그램 개발)

  • 김형욱;홍지향;고학균
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.02a
    • /
    • pp.395-400
    • /
    • 2002
  • 지역농가, 농협 단위로 그 지역에서 생산되는 특산물을 직접 살균 가공할 수 있는 연속살균공정과 장치를 설계할 수 있는 프로그램을 웹프로그래밍 언어의 일종인 JSP와 자바를 이용하여 개발하였다. 식품의 산성도 및 물리적 특성과 미생물의 내열특성 등 공정을 설계하는 데 필요한 전문적인 정보를 데이터베이스로 구축하여 사용자가 식품의 특성에 대해 자세하게 모르더라도 쉽게 식품의 살균공정을 설계할 수 있었다. 연속살균장치를 구성하고 있는 부분은 크게 열교환기와 가열유지관, 펌프이며, 이에 대한 설계를 장치 설계 프로그램에서 하였다. 열교환기, 가열유지관등의 설계는 장치의 생산량 및 가격등을 결정하는 주요 요소이며, 살균장치의 성능을 결정짓는 주요한 인자가 된다. 연속살균공정을 설계하는 데 필요한 인자는 식품의 pH특성, 식품의 종류이며, 입력된 값을 이용하여 데이터베이스 내에서 살균할 미생물의 종류와 미생물의 내열특성을 찾아 살균공정을 계산하게 된다. 프로그램을 통해 살균가능한 온도와 시간을 출력한다. 연속살균장치 설계 프로그램의 입력인자는 식품의 살균온도, 식품의 생산량, 열교환기에 사용할 열매체의 종류이며, 프로그램 내에서 열교환기의 전열계수, 식품을 살균온도가지 가열하는 데 걸리는 시간등이 계산되며, 결과값으로 열교환기의 특성 및 파이프의 구경과 길이, 펌프의 용량, 단열관의 구경과 길이가 출력된다. 살균 장치 중 열교환기의 설계에 사용되는 스테인레스 파이프를 국내에서 사용되는 규격별로 데이터베이스화하였으며, 파이프 제작업체 48개 업체, 펌프 제작업체 54개(국내 15개 업체, 미국 39개 업체), 열교환기 제작업체 13개업체(국내 13개 업체)에 대해서 데이터베이스를 구축하여 프로그램을 사용해 설계된 장치를 사용자가 쉽게 제작할 수 있도록 하였다. 공정설계프로그램을 통해 설계된 공정은 데이터베이스에 저장이 되며 장치설계프로그램에서 쉽게 이전에 설계했던 공정을 이용할 수 있도록 하여 공정 설계와 장치설계를 연계하도록 하였다.

  • PDF

Mass Production of Acanthopanax pedunculus through embryogenic cell culture and of madicinal row materials through bioreactor culture (참오갈피(Acanthopanax pedunculus)의 배형성 세포배양을 통한 식물체 대량번식 및 bio-reactor를 통한 약용원료 생산)

  • 정수진;윤의수;최용의
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2002.11b
    • /
    • pp.29-29
    • /
    • 2002
  • 참오갈피(Acanthopanax pedunculus)는 국내 고유한 자생 종이며 현재 몇 그루 만이 존재하는 것으로 추정된다. 이 수종은 대체적으로 다른 오갈피 수종에 비해 잎 및 열매는 물론 식물 전체 부위가 다소 커서 경제성이 높다고 판단된다. 본 실험에서는 참오갈피의 세포배양 기술을 이용한 묘목 및 약용원료의 산업적 대량 생산 기술을 개발하고자 수행 하였다. 참오갈피 접합자배를 적출하여 무균적으로 배양한 다음 자엽단계로 성숙한 이들 접합자배를 1 mg/1 2,4-D가 첨가된 MS 배지에 배양하여 배형성 캘러스를 유도하였다. 배형성 세포의 유도율은 약 72%에 달했다. 유도된 배형성 캘러스는 2,4-D가 첨가된 같은 고체 및 액체 배지에서 계대배양하여 배형성 캘러스 및 세포를 유지하였다. 배형성 캘러스를 2,4-D가 첨가되지 않은 배지에 옮겨주면 이들 세포로부터 체세포배가 발생되었다. 약 2개월의 기간을 거쳐 자엽단계로 성숙된 체세포 배는 발아되지 않기 때문에 5 mg/1 GA$_3$가 첨가된 1/2 MS 배지에 옮겨 발아 및 식물체로 재생 시켰다. 약 7 cm 크기로 재생된 식물체를 인공토양에 옮겨 1달간 순화시키고 난 후 토양에 옮겼을 경우 87%가 생존하였다. 기내에서 유도된 참오갈피 식물체는 특별한 처리를 하여주지 않아도 뿌리로부터 배발생 세포를 형성 할 수 있었다. 따라서 이들 식물체로부터 배발생세포 유도는 세포주의 보존 및 증식에 효과적으로 이용될 수 있었다. 한편 참오갈피 세포는 5-10 리터 바이오리엑터 배양을 통하여 배형성세포, 자엽단계의 배, 유식물의 대량생산의 가능성을 확인하였다.

  • PDF

Seed Production of Pes-gallinaceua(Corydalis, Fumariaceae) Group (현호색속 Pes-gallinaceua절 집단의 종자생산)

  • 민병미
    • The Korean Journal of Ecology
    • /
    • v.26 no.4
    • /
    • pp.189-197
    • /
    • 2003
  • Properties of seed production in Corydalis, spring ephemeral, group were studied during two years at Namhansansung area. Corydalis´ flower was out in the early April and its seed dispersed in the early May. The period of total seed production was 30 days. The decrease rate of sex organs was the highest between deflowering time and early fruiting time. The numbers of flower and seed per plant were in the range of 1∼13 and 0∼76, respectively. And the number of seed per fruit was from zero to twenty. In a plant, seed production was the most (11.8 seeds) in the lowest fruit and conspicuously decreased along the upward fruit. In the same plant, seed production was various by each year. The plants of small tuber size produced more seeds and those of large tuber size produced fewer seeds in the next year than this year. In the early growth season, the flowering plants/total plants rate increased in proportion to plant size (tuber volume), the rate of the smallest size class (<100 ㎣) was in the range of 5.0%(1999)∼5.4%(2000), those over the 600 ㎣ size classes were 100%. The number of flower per plant at the same size class were higher in 2000 than in 1999. Especially, at the size class of 900 ㎣≤, the numbers of flower per plant were 13.2 in 2000 and 6.5 in 1999. In the late growth season, the flowering plants/total plants rates were 13.3%in the smallest size class (<100 ㎣)and 100% over the 500 ㎣ size classes. Therefore, the flowering plants/total plants rates along the size classes were higher in the late growth season than in the early one. The bumer of fruit or seed per plant increased in proportion to the volume and dry weight of tuber, there was not significant and varied along each plant in the same size class. The number of fruit or seed per plant conspicuously increased in proportion to the leaf area. Therefore, it was thought that seed production was related to photosynthetic ability during growth season.

Biodiversity of Korean Myxomycetes(II) (한국산 변형균류의 다양성(II))

  • 조덕현
    • Korean Journal of Plant Resources
    • /
    • v.16 no.3
    • /
    • pp.245-250
    • /
    • 2003
  • Many myxomycetes were collected at Pyunsan penisula national park, Mt.Moak, Mt.Minjuji, Mt.Manrae, Wanju, Mt.Unjang from July, 1996 to August, 2000. They were identified. According to the results, Amaurochaete tubulina, Cribraria microcarpa, Cribraria splendens, Diachea leucopodia, Entreridium lycoperdon, Stemonitis flavogenita and Stemonitis fusca were unrecorded species in Korea. Characterisctics of them were habitated on rotten wood and fallen leaves. They were designed Korean common names by author.