• Polymer Science and Technology
• /
• v.8 no.6
• /
• pp.715-720
• /
• 1997

• Polymer Science and Technology
• /
• v.8 no.6
• /
• pp.700-706
• /
• 1997

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.571-578
• /
• 2013

Polyamide12 (PA12) is blended with ethylene propylene diene rubber (EPDM) at various compositions in the presence of maleated EPDM (mEPDM) to afford blend materials having the characteristics of thermoplastic elastomer (TPE). The EPDM/PA12 melt-blends are further irradiated with electron-beam (e-beam) at 0~100 kGy dosage, yielding selective crosslinking between EPDM chains while retaining melt-processibility originated from PA12 phase. mEPDM acts as a compatibilizer and affords additional improvements in mechanical properties of the EPDM/PA12 blend. With 25 kGy of e-beam irradiation and mEPDM, the EPDM/PA12 blends successfully exhibit TPE behaviors with reasonable elastomeric and mechanical properties.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.436-442
• /
• 2003

Thermosetting elastomer such as EPDM (Ethylene Propylene Dien Rubber) has been applied to the sponge weatherstrip of a vehicle as a main material. However, the thermosetting elastomers have limited recycling and have brought about the environmental problems. Furthermore, many steps of the manufacturing process such as formulation, mastication and vulcanization make difficult to control uniformity of the endproducts. These problems of current EPDM weatherstrip necessitated development of a new recyclable material, Thermoplastic Vulcanizates (TPV). In this study the influence of the water contents, and the processing conditions. On the foam density and structure in water blowing process was carried out. We found that TPV also can be foamed with water, maintaining the uniformity form this study. Therefore, many inevitable problems of EPDM weatherstrip can be solved, and this new technique is expected to take a roll of making a breakthrough in the rubber industry.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.56-59
• /
• 2003

열가소성 폴리우레탄 탄성체는 유리전이온도가 낮은 soft segment와 융점이 높은 hard segment로 이루어진 블록공중합체이다. 이들 두 블록은 서로 상분리가 일어남으로써 각각 의 domain을 형성하며, 그 결과 hard segment는 가교의 역할을 행함으로써 우수한 탄성을 발휘할 수 있다. 이의 물성은 hard segment 및 soft segment의 조성과 화학구조 및 이들의 상분리 정도에 따라 다양하게 되며 또한 이의 전이온도도 다르게 변화시킬 수 있다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.71-75
• /
• 1998

Segmented block copolymer인 polyurethane은 열역학적으로 불친화성을 갖는 두 segment unit (Hard segment unit과 Soft segment unit)에 의해 미세 상분리 현상이 나타나며 그 결과 hard-segment-rich hard domain과 soft-segment-rich soft matrix 구조를 갖는다. 상온보다 높은 유리전이온도를 갖는 hard segment와 낮은 유리전이온도를 갖는 soft segment의 특성으로 인해 polyurethane은 열가소성 탄성체의 성질을 갖으며 두 성분의 조성비에 따라 넓은 범위의 역학적인 성질을 나타낸다.(중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.203-206
• /
• 1998

열가소성 탄성체(Thermoplastic elastomers)의 일종인 polyurethane은 상온보다 높은 유리전이온도(T$_{g}$)를 갖는 hard segment(HS)와 낮은 T$_{g}$를 갖는 soft segment(SS)간의 열역학적 불친화성으로 인해 미세 상분리 구조를 갖는다. SS는 낮은 T$_{g}$로 인해 상온에서 rubbery한 성격을 나타내며 HS는 높은 T$_{g}$로 인해 물리적 가교 역할과 충진제 역할을 한다. Polyurethane은 중합당시의 조성이나 중합방법에 따라 다양한 내부구조를 갖으며 이런 내부구조의 변화에 따른 물리적 성질의 변화 역시 다양하다. (중략)

• Composites Research
• /
• v.32 no.6
• /
• pp.360-367
• /
• 2019

In order to apply thermoplastic composites using PETG resin to various industrial fields such as bicycle frames and industrial parts, it is necessary to verify the impact resistance, durability, mechanical properties and 3D analysis of the manufactured composite materials. To improve the mechanical properties, durability and impact resistance of PETG resin, an amorphous resin, in this study, compound and injection molding process were carried out enhanced various weight percent POE(polyolefin elastomer). The thermal and mechanical properties of the thermoplastic composites, and the charpy impact strength, The analysis was performed to evaluate the characteristics according to weight percent of POE. Charpy impact strength test was conducted to analyze the impact characteristics, and the fracture section was analyzed after the impact strength test. In the case of POE material-added thermoplastic composites, thermal and mechanical properties tend to decrease, but workability and impact resistance tend to be superior to those of PETG materials.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.596-601
• /
• 2014

Polyamide (PA) oligomers, which are the hard segment of poly(ether-block-amide) (PEBA), presenting thermoplastic and high performance elastomeric properties were prepared by polycondensation between 4-aminobenzoic acid and 12-aminododecanoic acid. Subsequently PEBAs were obtained by addition polymerization of the PA oligomers and various molecular weights of poly(tetramethylene glycol) (PTMG). The structure of the final PEBA was identified by using FTIR and $^1H$ NMR and the thermal properties depending on changes in the structure of hard segment were collected by using DSC and UTM analysis. As the results, the melt temperature ($T_m$), the initial modulus, and the maximum strength of PEBAs increased with an increase in aromatic moiety up to 30% without reducing crystallinity.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.121-133
• /
• 2014

Block copolymers including ABA triblock architectures are useful as thermoplastic elastomers and toughened plastics depending on the relative glassy and rubbery content. These materials can be blended with other polymers and utilized as additives, toughening agents, and compatibilizers. Most of commercially available block copolymers are derived from petroleum. Renewable alternatives are attractive considering the finite supply of fossil resources on earth and the overall economic and environmental expenses involved in the recovery and use of oil. Furthermore, tomorrow's sustainable materials are demanding the design and implementation with programmed end-of-life. The present review focuses on the preparation and evaluation of new classes of renewable ABA triblock copolymers and also emphasizes on the use of carbohydrate-derived poly(lactide) or plant-based poly(olefins) having a high glass transition temperature and/or high melting temperature for the hard phase in addition to the use of bio-based amorphous hydrocarbon polymers with a low glass transition temperature for the soft components. The combination of multiple controlled polymerizations has proven to be a powerful approach. Precision-controlled synthesis of these hybrid macromolecules has led to the development of new elastomers and tough plastics offering renewability, biodegradability, and high performance.