• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1146-1153
• /
• 1996

The properties of FRP(fiber-reinforced plastics) depend not only on the characteristics of the matrix but also on the structure of fiber mat and the fiber type of reinforcement. Therefore it is very important to study the characteristics of reinforcement and matrix. In this paper, a method is proposed which can be used to measure the mean coeffcient of separation for the press molding of FRP, and the mean equivalent coefficient of separation is obtained from the separation coefficient. And the relationship between the mean equivalent coefficient of separation and the structure of fiber mat is discussed. The effects of corrlelation coefficient between separation and orientation on the mean equivalent coefficient are also presented.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 1999.11a
• /
• pp.99-102
• /
• 1999

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.42-43
• /
• 1996

고분자 분미막을 이용한 분리기술은 기존의 분리기술에 비하여 에너지의 절약과 높은 분리효율 등의 장점이 있어 거의 모든 산업에 이용되고 있다. 분리막의 용도가 다양화됨에 따라서 내열성, 내약품성, 내유기용매성을 갖는 막소재의 개발이 필요하게 되었다. polyimide(PI)게의 고분자는 물리, 화학적 성능이 우수하고 내열성과 내유기용매성 등이 우수한 열가소성수지로서 film, sheet, tubular형으로 만들 수 있어 한외여과막이나 역삼투막, 기체분리막 등에 이용되고 있다. 그러나 투과속도를 높디고, fouling을 줄이기 위해서는 화학적 개질을 통해 친수성을 높이는 방법이 필요하다. 본 실험에서는 내열성과 내유기용매성이 우수한 polyetherimide계 고분자를 chlorosulfonic acid(CSA)를 이용하여 술폰화시킴으로써, 극성기의 도입에 의해 친수성이 향상된 sulfonated polyetherimide(SPEI)를 합성하였다.

• Composites Research
• /
• v.37 no.4
• /
• pp.325-329
• /
• 2024

To accurately predict airbag deployment during a collision, the mechanical properties of polymer materials at high strain rates according to temperature should be considered. In this study, the mechanical properties of TPO and polypropylene were measured at high strain rates via split-Hopkinson pressure bar tests under various environmental temperatures ranging from -35 to 85℃. Through this, tensile strength and failure strain were derived for each strain rate. As the polymer phase moves toward the high strain rate region, the β-transition becomes dominant, resulting in a non-linear increase in tensile strength in the Eyring plot. Additionally, an airbag module impact simulation was conducted to verify the effects of strain rate on airbag deployment using the LS-DYNA software. It was found that the TPO and polypropylene airbag deployment could be accurately predicted using the strain-rate-dependent mechanical behavior rather than quasi-static properties alone.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.139-139
• /
• 2008

나노 임프린트 리소그래피 방법을 이용하여 매미 날개의 표면구조를 열가소성 고분자 시트 위에 역상으로 전사하였다. 그 후 표면구조가 형성된 시트의 UV-가시광선 투과도와 증류수의 접촉각을 측정함으로써 표면구조 형성을 통해 난반사 효과와 자가 세정 효과를 부여하였음을 확인하였다.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.424-432
• /
• 1996

The fiber reinforced thermoplastic composites(FRTP) were prepared with polypropylene fiber(PPF) as matrix and vinylon(VF), Aramid(KF) or nylon fiber(PAF) as reinforcing materials using the integrated fiber mixing apparatus. The composite sheets were prepared by compression molding and their impact and morphological properties were characterized. VF/PP system showed the maximum value in Izod impact strength, while KF/PP system showed the maximum value in high rate impact properties. Ductility Index(DI) order was VF/PP>KF/PP>PAF/PP. A maximum DI for VF/PP, 2.43, was obtained when the weight fraction of VF was 20%. The optimum amount of the reinforcing organic fiber was found to be 20~30%. As a result, it is concluded that VF/PP system has better interfacial adhesion properties than either KF/PP or PAF/PP.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.786-795
• /
• 1996

The fiber reinforced thermoplastics(FRTP) were prepared with polypropylene fiber(PP) as matrix and polyvinyl alchol(VF), aramid(KF) or polyamide fiber(PAF) as the reinforcing materials using the integrated fiber mixing apparatus. The reinforced thermoplastic sheets were prepared by com¬pression molding and their morphology, rheological and mechanical properties were characterized. In the morphological properties of composites, the wettability of the reinforced thermoplastics were decreased in proportion to the content of fibers. At low angular frequency, the viscosity of PAF /PP and VF/PP composite was increased with the content of reinforced fiber. However at high frequency the viscosity of composite reinforced with 5~20wt% fiber, was shown the reduced values which approaches that of the neat matrix. The mechanical properties of the composite were changed with the content of reinforecd fiber, and VF/PP and KF/PP composite had better properties than PAF/PP system.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.52-52
• /
• 2012

Poly(phenylene sulfide)(PPS)는 내열성 및 내화학성이 뛰어난 고분자 소재로, 대표적인 엔지니어링 플라스틱 중 하나이다. PPS는 벤젠 링에 황원자가 파라 치환 형태로 교대로 존재하는 결정성 고분자이며, 다른 대부분의 고성능 섬유고분자가 용융되지 않는 것과는 달리 용융되는 열가소성 소재이다. PPS는 높은 내약품성과 열에 대한 장기적인 안정성을 나타내고, 방염제 첨가 없이도 방염화가 가능하며, 전기 절연성이 뛰어나고, 형태안정성도 우수하다. 또한 $200^{\circ}C$ 이하에서는 어떤 용매에도 용해되지 않으며, $200^{\circ}C$ 이상에서도 몇 가지 방향족 화합물에만 제한된 범위 내에서 용해되는 우수한 내약품성을 나타낸다. PPS의 내열성을 더욱 우수하게 하기 위해 고분자 사슬을 가교할 수 있다. 가교에는 열처리 또는 감마선, 전자선, 자외선 조사를 이용할 수 있는데 열에 의한 가교는 균일한 열전달과 고온이 필요하며 감마선 및 전자선 조사는 설비의 고비용과 방사선 노출 위험으로 인해 비친환경적이다. 반면에 자외선 조사법은 다루기 쉽고 비용이 적게 들고 친환경적인 장점을 가진다. 본 연구에서는 PPS film의 열안정성을 향상시키기 위해 자외선 조사를 이용하여 PPS film의 광가교를 수행하였다.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.15-22
• /
• 2008

Polyolefin block copolymer has been taking a great deal of attention due to their great potential in polymer industry since a new metallocene catalytic method for producing polyolefin block copolymer was developed by Dow Chemicals. However, so far, there was no systematic study of olefin block copolymer. In this review, Linear polyolefin block copolymers, containing semicrystalline poly (ethylene) (E) blocks and a rubbery block as a thermoplastic elastomer, were investigated in the viewpoint of microphase separation mode, microstructure, deformation behavior, and molecular architecture.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.141-147
• /
• 2014

A nondestructive ultrasonic technique was applied to evaluate the thermal characteristics and degradation of synthetic polymer resin (plastics) with better cost-effectiveness and functionality than glass and metal. Thermoplastic and transparent acrylic resin (PMMA) specimens were annealed at below the glass transition temperature ($T_g$), and the propagation characteristics (attenuation and velocity) were measured. The attenuation increased and the velocity decreased with thermal degradation. The results showed that the thermal aging of the specimens could be evaluated quantitatively and that the Tg could be evaluated qualitatively.