• Journal of the Korean earth science society
• /
• v.21 no.1
• /
• pp.23-39
• /
• 2000

To search out the characteristics of the lower and the upper atmospheric vertical structure, we selected the island(Oeyoundori Ochun-myen Poryeng city Chung-Nam) as an observation site, which is thought to represent the characteristics of ocean well, and observed the vertical structure of the atmosphere by Radiosonde. By using the results of the observation, we analyzed the changes of relative humidity(RH), temperature and wind when the cyclone and the anticyclone passed and compared the results in case of each event. To compare the vertical structure of the ocean atmosphere with those of the continent we analyzed the values observed with using Radiosonde at Osan site. Through this study, we found that relative humidity changed as the cyclone and the anticyclone passed. That is, when the cyclone came, RH increased first in the upper atmosphere than in the lower and when the high came, RH in the upper decreased sharply to 10%. And the variations of relative humidity in ocean are bigger than those in continent. In the future, we plan to f d out the relation between the vapor water in ocean and continent seasonally and daily through the observation in ocean and continent at same time.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.122-130
• /
• 2021

A wind-speed estimation at the arbitrary elevations is key component for the design of the offshore wind energy structures and the computation of the wind-wave generation. However, the wind-speed estimation of the target elevation has been carried out by using the typical functions and their typical parameters, e.g., power and logarithmic functions because the available wind speed data is limited to the specific elevation, such as 2~3m, 10 m, and so on. In this study, the parameters of the vertical profile functions are estimated with optimal and analyzed the parameter ranges using the HeMOSU-1 platform wind data monitored at the eight different locations. The results show that the mean value of the exponent of the power function is 0.1, which is significantly lower than the typically recommended value, 0.14. The values of the exponent, the friction velocity, and the roughness parameters are in the ranges 0.0~0.3, 0~10 (m/s), and 0.0~1.0 (m), respectively. The parameter ranges differ from the typical ranges because the atmospheric stability condition is assumed as the neutral condition. To improve the estimation accuracy, the atmospheric condition should be considered, and a more general (non-linear) vertical profile functions should be introduced to fit the diverse profile patterns and parameters.

• Korean Journal of Remote Sensing
• /
• v.30 no.4
• /
• pp.525-536
• /
• 2014

In this study, a method to assess and monitor hydrological drought using remote sensing was investigated for use in regions with limited observation data, and was applied to the Upper Namhangang basin in South Korea, which was seriously affected by the 2008-2009 drought. Drought information may be obtained more easily from meteorological data based on water balance than hydrological data that are hard to estimate. Air temperature data at 2 m above ground level (AGL) were estimated using remotely sensed data, evapotranspiration was estimated from the air temperature, and the correlations between precipitation minus evapotranspiration (P-PET) and streamflow percentiles were examined. Land Surface Temperature data with $1{\times}1km$ spatial resolution as well as Atmospheric Profile data with $5{\times}5km$ spatial resolution from MODIS sensor on board Aqua satellite were used to estimate monthly maximum and minimum air temperature in South Korea. Evapotranspiration was estimated from the maximum and minimum air temperature using the Hargreaves method and the estimates were compared to existing data of the University of Montana based on Penman-Monteith method showing smaller coefficient of determination values but smaller error values. Precipitation was obtained from TRMM monthly rainfall data, and the correlations of 1-, 3-, 6-, and 12-month P-PET percentiles with streamflow percentiles were analyzed for the Upper Namhan-gang basin in South Korea. The 1-month P-PET percentile during JJA (r = 0.89, tau = 0.71) and SON (r = 0.63, tau = 0.47) in the Upper Namhan-gang basin are highly correlated with the streamflow percentile with 95% confidence level. Since the effect of precipitation in the basin is especially high, the correlation between evapotranspiration percentile and streamflow percentile is positive. These results indicate that remote sensing-based P-PET estimates can be used for the assessment and monitoring of hydrological drought. The high spatial resolution estimates can be used in the decision-making process to minimize the adverse impacts of hydrological drought and to establish differentiated measures coping with drought.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.9
• /
• pp.5-12
• /
• 2016

Numerical analyses were carried out to simulate tilting control on the suction pile for offshore wind power embedded into cohesive soil and cohesionless soil using finite element software, ABAQUS. A 3-dimensional suction pile was modelled as a wished-in-place pile with $1^{\circ}$ tilted from vertical line. The inner room of suction pile was divided into 3 separate rooms for tilting control, and point load was applied to the center of gravity of a separate room to restore the original position of the suction pile. From numerical analyses, required suction pressure was obtained for desired tilting degree, and the maximum/minimum principle stresses of concrete skirt and the Mises stresses of inner steel wall were collected at original position. It was found that the required suction pressure was about 410 kPa for cohesive soil, and about 1,800 kPa for cohesionless soil.; likewise, obtained stresses were greater for cohesionless soil than cohesive soil.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.313-325
• /
• 2011

Finite element grid system using h-refinement on the Yellow Sea was constructed based on previous study (Suh, 1999b) from 14 K to 210 K and special attention was concentrated on refining the coastal zone. In grid generation, depth change between adjacent points and non-dimensional tidal wave length ratio were considered. As a result approximately a quarter of the total nodes are located nearby 5 m of shallow area. Accurate bathymetry data using 30's and ETOPO1 with open boundary conditions of 8 major tidal constituents extracted automatically from FES2004 have been applied. In tidal simulation a 3-dimensional nonlinear harmonic model was setup and tidal amplification due to changes in vertical turbulent and bottom friction were simulated. In this study not only 8 major tidal constituents but also nonlinear shallow tides $M_4,$, $MS_4$ and long period $M_f,$, $M_{sf}$ were reproduced. It is found that implication of spatial variation of friction coefficient plays a very important role in reproduction of astronomical and shallow tides which are computed by iterative computation of nonlinear terms. Also it should be considered differently with respect to tidal periods. To understand the distribution of tidal asymmetry, amplitude ratio of $M_4/M_2$ and phase differences $2g(M_2)-g(M_4)$ were calculated. Tidal distortion ratio marks up to 0.2 on the west coast showing shallow coastal characteristics and somewhat wide range of ebb-dominances in front of Mokpo area are reproduced.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.81-92
• /
• 2018

For a marine bridge foundation construction, a large-circular-steel-pipe has been proposed for supporting vertical load and preventing water infiltration. However, a ship collision can adversely affect the structural stability. This paper presents a fundamental study on dynamic responses of the large-circular-steel-pipe by an impact load. In laboratory experiments, small-scaled steel pipe is installed in a soil tank. The soil height and water level are set to 23 cm and 25~70 cm, respectively. The upper part of the steel pipe is impacted using a hammer to simulate the ship collision. The dynamic responses are measured using accelerometers and strain gauges. Experimental results show that the strain decreases as the measured location is lowered. The higher frequency components appear in the impact load condition compared to the microtremor condition. However, the higher frequency components measured at the strain gauge located below the water level do not appear. For the accelerometer signal, the maximum frequency under the impact load is higher than that of the microtremor. The maximum frequency decreases as water level increases but it is larger than the maximum frequency of the microtremor. This study shows that strain gauge and accelerometer can be useful for evaluating the dynamic responses of large-circular-steel-pipes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.312-317
• /
• 2006

지역규모의 기후변화 모의결과를 이용하여 금강유역 용담댐의 홍수기 치수안전도에 대한 민감도분석을 수행하였다. 기후변화 모의에 사용된 SNURCM(Seoul National University Regional Climate Model)은 미국 National Center for Atmospheric Research의 Community Climate System Model의 전지구모형을 기반으로 spectral nudging 기법을 사용한 공간해상도 30 km, 연직 21층의 지역기후모형이다. 기후변화 시나리오로는 SRES 'B1'이 사용되었으며 과거 control run에 대한 기후모의 정확도 분석을 통하여 SNURCM 기상자료를 관측치와 비교한 결과 면적강우량을 다소 과소추정하였고 이점을 감안하여 SNURCM의 일 모의결과에 보정 계수를 적용하였다. 하천유출량은 SSARR 모형을 이용하여 SNURCM 모의가 수행된 전체기간을 $1980{\sim}1999$년과 $2000{\sim}2019$년으로 20년씩 나누어 용담댐 일 유입량을 산정하여 통계분석을 실시하였고 과거와 미래 20년 동안을 비교하여 본 결과 (1) 유량의 평균보다는 분산이 미래 20년 동안 증가하여 가뭄과 홍수에 대한 위험도가 증가함을 알 수 있었고, (2) 특히 연최대유량 또한 미래 20년 동안 상당히 증가하여 홍수기 치수대책이 더욱 중요해질 것으로 판단되었다. 마지막으로 용담댐 운영은 범용 시스템분석 도구인 STELLA(System Thinking Experimental Learning Laboratory with Animation) 상에서 GUI로 구현하여 유입량 변화에 따른 용담댐 치수안전도 변화를 모의해 보았다. 용담댐의 홍수기 운영은 저수지 수위가 제한수위를 초과하기 시작하면 Rigid ROM 발효하여 방류량을 결정하도록 구성하였고, 무효방류(spill)가 일어나는 현상을 실패로 가정하여 이에 대한 신뢰도(reliability), 회복도(resiliency), 그리고 심도(vulnerability)를 치수안전도 지표로 계산하였다. 전체기간을 1980년${\sim}$1999년, 2000년${\sim}$2019년, 2000년${\sim}$2009년, 그리고 2010년${\sim}$2019년까지 총 4구간으로 나누어 결과를 도출하였으며 예상한 바와 같이 후반기 20년 동안에 세 가지 지표가 취약해 지는 것을 확인할 수 있었고, 특히 2000년부터 2009년까지 10년 동안에는 더욱 취약해짐을 확인할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.304-309
• /
• 2008

기존의 태풍예측과 관련된 연구들은 전 지구적인 흐름이 직접적으로 계산되지 않은 중규모 기상모형이나 태풍모형들을 이용하여왔다. 하지만 최근 전 세계적으로 전구 규모의 모형들이 40km 이하의 고해상도 모형들이 개발되어 20km이하의 초고해상도 시물레이션이 가능해짐에 따라 지역적인 기상현상들을 전구모형을 통해서 재현해 내고 있다. 따라서 본 연구에서는 고해상도 전구모형을 이용하여 태풍 실험을 하고자 하며, 독일기상청에서 개발된 Icosahedral-hexagonal 격자체계의 GME전구 모형을 이용한 태풍모의 결과를 기상청 태풍 best track과 비교 분석 하였다. 실험에 사용된 모형 분해능은 연직 47layer (7 soil layer 포함), 수평 약 40km와 20km으로 구성되었다. 최근 3년($2005{\sim}2007$)간의 동아시아지역을 지나간 태풍을 대상으로 하였다. 태풍모의 시작시간은 각 TD(Tropical Depression)발생 24시간 전 자료를 이용하였으며, 각 태풍의 소멸 24시간 후까지 모의하였다. GME 모형을 이용한 태풍모의 결과에서 best track의 경우 모의 시작 후 약 168시간 forcast 결과가 매우 유사한 경로를 따라 진행해 가고 있으며, 태풍의 전향이 이루어지는 시각은 ${\pm}3$시간 내외의 오차를 보이고 있다. 태풍경로의 경우 40km 결과에 비해 20km 모의 결과가 best track에 더 가까운 결과를 보이고 있다. 중심기압변화의 경우 40km의 결과가 20km 결과에 비해 변화경향이 유사한 형태를 보이고 있으며, 20km 결과의 경우 중심기압의 변화가 다소 급하게 나타나는 경향을 보이는 특성을 가지고 있지만 40km결과에 비해 최저 중심기압이 더욱 뚜렷하게 나타나고 있으며 특히, MANYI case의 경우 관측값 930hPa보다 더 낮은 911.4hPa의 결과를 보이고 있다. 풍속의 경우도 중심기압변화와 유사한 결과를 보이고 있으나, 최대 풍속의 경우 40km 결과에 비해 20km결과가 관측과의 오차범위가 $2{\sim}3\;m/s$ 내외로 나타나고 있다. 그리고 GME모형의 경우 태풍(TD) 발생 약168시간 이전에 예측이 가능한 결과를 보인다. 이 연구의 결과는 다른 기상모형에서 태풍 강도가 약하게 모의되던 현상이 상당히 개선된 것을 알 수 있으며, 이는 20km 고해상도 GME 모형이 태풍예측모형으로 활용이 간능 할 것으로 사료 된다.

• Journal of the Korean earth science society
• /
• v.32 no.1
• /
• pp.46-56
• /
• 2011

The purpose of this paper is to evaluate the wind energy resources with high spatial resolution in Sunghak and Guduck mountains in Busan Metropolitan area under the various atmospheric stabilities. The numerical model used in this research is A2C (Atmosphere to CFD), mainly applied to assess the regional scale and microscale meteorological phenformin. Wind under the strong atmospheric stability moves around mountain side smoothly due to the strong potential energy. On the other hand, the cavity region on the lee side of mountain tends to be created and expanded as the atmospheric stability decrease. Annually the average distribution of wind power density, turbulence kinetic energy, and vertical wind shear help to explain quantitatively that wind resource near the northern side of Guduck mountain top is more suitable to establish wind energy complex than that in any other regions in the target area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3C
• /
• pp.105-111
• /
• 2012

Bucket foundations, which are used in the foundations of offshore wind turbines, should be able to withstand large amounts of horizontal and moment loads. Tripod bucket foundation, which combines three single buckets, has been used to increase horizontal and moment capacities. This study performed numerical analysis using ABAQUS (2010), to analyze the group effect and the bearing capacity of a tripod bucket in clay. Parametric studies were performed varying the bucket spacing ratio S/D (S=spacing between the centers of the bucket and the tower; D=diameter of the bucket) and depth ratio L/D (L=embedded length of skirt). The applied constitutive models were a linear elastic perfectly plastic model with Tresca yield criteria for normally consolidated clay and an elastic model for buckets. Loading in the vertical, horizontal, and moment directions was simulated with an increase in each movement at a reference point. The bearing behavior and the capacities of a single and a tripod bucket were compared. Capacity evaluation method of the tripod bucket was suggested using the capacity of a single bucket.