• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2022

As a power transmission element, the timing belt is a toothed transmission belt that takes advantages of V-belts and gears. It has characteristics of non-slip and low noise. It is used as a power transmission device when transmitting power from a rotating shaft or linear motion in a mechanism. Rotation can be accurately transmitted through a belt pulley with grooves like a gear and a timing belt with grooves to precisely match with the belt pulley. In particular, in the mechanism in which the timing belt is used for the output shaft, the dynamic characteristics including the rigidity of the timing belt determine the transmission characteristics of the system, so its importance increases. In this paper, a stiffness reinforced belt that can be applied to a timing belt with a limited range of motion to increase its stiffness is proposed. To study the dynamic characteristics of the stiffness reinforced belt, the equation of motion for the stiffness reinforced belt was established, and a simulation model for the stiffness reinforced belt was created and analyzed. In order to confirm the analysis results of the motion equation and simulation model, a 1-axis rotation experimental equipment using a stiffness reinforcing belt was developed and the experiment was conducted. Through motion equations, simulation models, and experiment results, it was confirmed that the stiffness and dynamic characteristics of the timing belt could be improved by applying the proposed stiffness reinforcement belt.

• Journal of the Korea Convergence Society
• /
• v.2 no.3
• /
• pp.45-50
• /
• 2011

High performance heat transfer channel is necessary to discharge operating heat of computer and high integrated circuit, refrigerator and air conditioning system. Nano-Tube is useful module witch is able to cope with heat transfer problems. The purpose of this study is to develop the process and manufacturing system for Nano-Tube. Since the Nano-Tube which is used in our country is imported, this study will contribute the development of Nano-Tube technique and economic profits with import substitute effect. This study show the procedure of process and manufacturing system development.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.143-144
• /
• 2023

해양수산부가 구축한 초고속 해상무선통신망(LTE-Maritime)은 연안으로부터 최대 100km 해역을 항해하는 선박들에게 지능형 해상교통정보서비스(e-Nav)를 제공하기 위한 기반 통신 인프라다. 선박에서 e-Nav 서비스를 제공받기 위해 LTE-M. 무선설비는 선내 고정 설치되어 유선으로 연결된 표시장치와 연동이 필요하다. 이는 공간이 협소하고 밀폐된 소형선박에 설치의 어려움뿐 아니라 선내 센서를 비롯한 다양한 IoT 기기 등과의 연결성에 제약을 줄 수 있다. 또한 선박이 육상의 LTE-M. 기지국과 멀리 떨어질 경우, 다운링크에 비해 업링크 통신품질이 상대적으로 취약해져 긴급 조난 신호를 비롯한 위험상황의 전달에 문제가 발생될 수 있다. 본 연구에서는 LTE-M. 망의 무선설비 다각화 사업으로 추진·개발된 소형선용 WiFi 및 업링크 향상용 무선설비의 실해역 성능 시험 방안을 고찰하여, 선내 WiFi 무선 품질을 평가하기 위한 성능 지표를 비롯해 업링크 통신속도 개선 등을 확인하기 위한 상호운용성 성능 시험 방안을 제시하고자 한다.

• Archives of design research
• /
• no.18
• /
• pp.87-96
• /
• 1996

The purpose of this study is to classify the images of blue based on expressive values communicated by color on symbolic aspects and the blue images expressed in modem apparel fashion. Images of blue are classified through the document studies as follows : The expressive values of blue are cold, receding, and sedative. Based on these values, affimative images of blue are classified infinite, lofty, peaceful, tranquil and contemplate. Negative images are classified sad, indecent, rebellious, and indignant. In apparel fashion, blue acted as a important image factor in classic, workwear, military and marine look. Blue green and purple blue in pale, greyish and light tones were showed as trend color. Meanwhile, purple blues in dark greyish, pale and greyish tones were more used for domestic womens wear.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.3
• /
• pp.219-226
• /
• 2007

Among the interplanetary shock (IP shock)s observed by ACE spacecraft at 1AU during 1997 to 2000, we have selected 31 IP shocks which had triggered the interplanetary type II radio bursts detected by the WIND spacecraft while those shocks were leaving the Sun. We compared the observed IP shock propagation speeds and the IP shock transit speeds estimated by time difference between the interplanetary type II radio burst detection and the IP shock observation. Then, we found that the mean acceleration of the IP shocks between the Sun and the Earth is about $-1.02m/sec^2$, which means the deceleration contrary to the positive acceleration predicted by Parker solar wind model. It is also verified that the acceleration of the IP shock does not show any linear correlation with the shock propagation speed and the Mach number of the IP shock.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.204-209
• /
• 2014

The purpose of this study is to produce a simulator that can control a pulse pressure keeping the pulse wave transfer phenomenon. For this, the elastic tube is combined with a compliance chamber for the vessel part. The simulator is comprised of four parts; a pressure generation part with slider-crank mechanism, a vessel part with resistance controller, water reservoirs and a measurement part. The changes of waveform depending on the location of a chamber is examined to determine the position of a chamber. The effects of a chamber on the pulse pressure and the pulse wave transfer phenomenon were investigated. It showed that the simulator which had the chamber in upstream of tube produces pressure wave, being more similar to the clinical waveform than in downstream of tube. Furthermore, with the chamber, the simulator generates a pulse pressure, being more similar to the normal physiological values than without one. The chamber had little effect on the pulse wave velocity.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.212-218
• /
• 2020

The purpose of this study is to investigate the fire resistance of ultra-high-performance concrete according to the amount of polypropylene fiber. Different mixtures according to the amount of polypropylene fiber were exposed to a maximum temperature of 900℃; and explosive spalling, residual compressive strength, and ultrasonic velocity of each specimen were evaluated. Test results showed that the fire resistance can be improved by including a small amount of polypropylene fiber in ultra-high performance concrete. It was not observed that explosive spalling occur at a temperature of 900℃ when the polypropylene fibers over 0.4% were included. Residual compressive strength and ultrasonic velocity decreased by 48% and 44%, respectively, compared to those at room temperature.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.86-94
• /
• 2019

The purpose of this study was to analyzes the problems in terms of transmission the information of architecture in the current apartment housing sales phase, to suggest the way of application the technology of BIM-based virtual reality. For this purpose, each element technology is analyzed through analyzing the exiting studies and international technical trend of BIM-based virtual reality and motion recognition devices. And then this study analyze the present condition of apartment housing sales phase and it conduct the expert interviews for derive the problem and analyzing the importance and priority by AHP method. And finally, this study suggest the solution in terms of information delivery in apartment housing sales phase through plan for support and deriving the function about problems. The system of BIM-based virtual reality viewer that utilize a leap motion that was presented in this study, it is believed to be able to efficiently transfer the information of architecture as building information transmission system user-centric in the future of apartment housing sales phase.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.5
• /
• pp.282-293
• /
• 2005

Sonoelastography is an ultrasound-based technique that visualizes the elastic properties of soft tissues by measuring the tissue motion generated by an externally applied vibration. In this paper. the characteristics of wave generation in soft tissues due to an acoustic vibrator are studied. The effects of modal patterns on the detectability of lesions such as tumors in senoelastography are also investigated These are accomplished by analyzing the vibration patterns calculated using theoretical equations and finite element methods in halt space, infinite plate. and finite-sized tissue. A finite-width source generates shear waves with large amplitude Propagating in specific directions. and the generation characteristics depend both on the width and frequency of the vibrator. as well as the distance from it. It is shown in a finite-sized tissue that the lesion detection in displacement images is quit dependent on the modal patterns inside tissue. In contrast it Is also found that the lesion detectability in strain images is less dependent on the modal Patterns and is much better than that in displacement images.

• Journal of Oral Medicine and Pain
• /
• v.23 no.2
• /
• pp.101-108
• /
• 1998

본 연구는 두 가지 관점, 즉 다이오드레이저를 구강연조직에 접촉식으로 조사하여 조직을 절제할 경우 첫째 심부조직에서의 온도 상승 정도에 대한 분석 평가, 둘째 절제에 따른 조직의 열적 응고에 대한 조직학적 분석 평가를 위해 시도되었다. 연구를 위해 도축된 소의 혀 배면으로부터 5.0mm깊이에 T형 열전대(type T thermocouple)를 설치하고 조사조건에 따른 레이저절제 도주의 온도변화를 측정하고, 또한 해당조사부위의 조직을 대상으로 통법에 의한 H-E염색 후 조직학적 측면에서 열적 응고상을 검색하여 Nd:YAG레이저의 경우에서와 비교하였다. 즉 파장815nm의 다이오드레이저를 0-10W의 출력, 50Hz와 연속파의 주파수조건에서 접촉식으로 조사하였으며, 또한 파장1064nm의 Nd:YAG레이저를 0-10W의 출력, 50Hz와 100Hz의 주파수 조건에서 접촉식으로 조사하였다. 레이저의 접촉조사시 레이저광섬유 첨단부에서 10(10gm의 일정한 압력과 25mm/sec의 이동속도로 조직을 절제하였다. 레이저가 접촉조사된 조직부위를 통법에 의해 조직학적으로 H-E염색을 시행하였으며, 계측현미경을 이용하여 10배율 아래에서 조직절제의 폭과 깊이, 측방 및 하방 쪽으로 열적 응고의 폭을 계측하였다. 계측치에 대한 통계학적 처리결과 조직절제의 폭과 측방쪽으로 열적응고의 폭은 다이오드레이저에와 Nd:YAG레이저에서 같은 정도를 나타냈다. 조직절제의 깊이는 Nd:YAG레이저에서에 비해 다이오드레이저에서 더 깊었다. 하방쪽으로의 열적응고의 폭은 Nd:YAG레이저를 10Hz의 조건에서 조사한 경우에서 가장 넓었으며, 다이오드레이저를 50Hz와 연속파의 조건에서 조사한 경우에서 가장 좁았다. 레이저절제 도중 심부조직에서의 온도변화는 다이오드 레이저에서와 Nd:YAG레이저에서 모두 출력이 증가함에 따라 상승되었으며, 다이오드레이저에서 보다 Nd:YAG레이저에서 더 높이 상승되었다. 결론적으로 본 연구에서 시도된 조사조건 범위 이내에서는 구강연조직 절제시 다이오드레이저가 펄스형 광섬유 전달식 Nd:YAG레이저 보다 심부조직에서의 낮은 온도상승과 하방쪽으로의 좁은 열적 응고의 폭을 보이면서 우수한 조직절제효과를 나타냈다.