• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.227-233
• /
• 2011

Korea coastal area is highly potential dangerous zone of marine accident due to frequent ship's encounters. VTS center can't identify ship's information because of beyond VHF range. It is also difficult of us to efficiently manage vessel traffic beyond VTS control area, so that it can't prevent marine accident. Presently, korean government is conducting maritime traffic safety assessment according to enlargement of harbor & development of new port but do not have the system which provide danger of information depending on maritime traffic environment with real time. So it is necessary to develop evaluation index which can assess sea risk through the evaluation of maritime traffic environment. In this paper, on the basis of vessel navigator's risk consciousness, we carried out survey & statistical analysis vessel navigator's subjective risk depending on the LOA, crossing situation($045^{\circ}$, $090^{\circ}$, $135^{\circ}$), overtaking, head-on situation, encountering vessel's side, within or outside harbor, speed with other vessel(ex. same, fast or slow), speed difference with other vessel and distance with other vessel & propose basic expression to develop maritime traffic safety evaluation model. And by using this model, we can confirm that this proposing expression is suitable for domestic maritime traffic environment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.632-638
• /
• 2022

As Korean coastal activity is high, the incidence of accidents caused by marine waste is extensive. An accident in which marine floating waste ropes and fishing nets are wound around the propeller of a sailing ship is termed "Rope wrapped accident." To prevent such accidents, this study applied the Finite Element Method (F.E.M.) for performance evaluation of the shaver type cutter, commercialized in Korea, through a structural safety review and water tank test. The results demonstrate that all parts constituting the rope cutter were damaged before reaching 0.5s, and the safety factor of each part was found to be at least 2 based on the maximum stress generated compared to the tensile strength. In the basin test, the cutting process of the shaver type rope cutter was reviewed, and the installation angle was set for each case considering that the rope floating in the sea actually enters at various angles. Consequently, as it was successful at cutting in all the cases, it can be concluded that there will be no problem in cutting the rope regardless of the mounted angle of the cutting blade.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1111-1119
• /
• 2022

Tourism projects through islands in the waters of Sinan-gun became active, and as a result, a total of 13 marine bridges connecting islands were completed. However, the marine bridge constructed in the fairway is dangerous for traffic. Particularly, in the case of the marine bridge connecting two islands, the width of the fairway is extremely narrow, therefore the risk is higher. In this study, we evaluated the risk of collision between marine bridge piers and ships using the IALA Waterway Risk Assessment Program (IWRAP), a risk assessment model for port waterways, based on a maritime traffic survey on the coastal bridge in Sinan-gun. The results, indicated that No.1 Sinan bridge had the highest probability of collision and most of the transit ships were coastal passenger ships. In addition, No.1 Sinan bridge was the place where the most collision accidents occurred among the marine bridge piers in the target sea, and the cause this study was analyzed. An analysis of the satellite images of the sea environment of No.1 Sinan bridge using an image processing method, confirmed that obstacles that could not be seen in the chart existed nearby the bridge. As a result, traffic was observed to be concentrated in one direction, unlike two-way traffic, which is a method of inducing traffic of bridges to avoid obstacles. The risk cause analysis method using the image processing technique of this study is expected to be used as a basic research method for analyzing the risk factors of island bridge in the future.

• Journal of Navigation and Port Research
• /
• v.33 no.8
• /
• pp.513-518
• /
• 2009

To prevent accidents and take immediate actions to minimize the damages caused by such disasters, there have been several information system related to marine transportation in or near harbour areas and coastal waters. However, those systems were operated independently and not able to exchange each others important data necessary for the cooperation of the relevant authorities in case of accidents. Standards of data formats and their exchanges needed to make information systems play efficiently their roles are proposed in this paper, and the proposed method is expected to help manage the marine transportation in the waters of jurisdiction and prevent marine accidents which cause huge amounts of casualties in the shipping industries and the natural environments.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.775-782
• /
• 2017

The position of existing patrol ships has been decided according to subjective judgments, not purely by any reasonable or scientific criteria, because of a lack of access to marine accident positions. In this study, the optimal location of patrol ships is quantitatively determined based on historical marine accident data. The study area used included the coastal sea of Pohang in South Korea. In this study, a k-means clustering algorithm was used to derive the location of patrol ships, and then a Voronoi diagram was used to divide the region around each patrol ship. As a result, the average navigation distance for patrol ships was improved by 4.4 nautical miles, and the average arrival time was improved by 13.2 minutes per marine accident. Moreover, if the locations of patrol ships need to be changed flexibly, it will be possible to optimally arrange limited resources using the technique developed in this study to ensure a fast rescue.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.31-38
• /
• 2020

The characteristics of ship traffic routes and the long term fluctuation in marine traf ic volume of the incoming and outgoing routes of the Yeosu Gwangyang Port were analyzed using vessel traffic data from the past 22 years and a real-time vessel traffic volume survey performed for 72 hours per year, for three years, between 2015 and 2017. As of 2017, the number of vessels passing through Yeosu Gwangyang Port was about 66,000 and the total tonnage of these ships was about 804,564 thousand tons, which is a 400 % increase from the 189,906 thousand tons shipped in 1996. Specifically, the dangerous cargo volume was 140,000 thousand tons, which is a 250 % increase compared to 1996. According to the real-time vessel traffic volume survey, the average daily number of vessels was 357, and traf ic route utilization rates were 28.1 % in the Nakpo sea area, 43.8 % in the specified sea area, and the coastal area traf ic route, Dolsan coastal area, and Kumhodo sea area showed the same rate of 6.8 %. Many routes meet in the Nakpo sea area and, parallel and cross passing were frequent. Many small work vessels entered the specific sea area from the neighboring coastal area traffic route and frequently intersected the path of larger vessels. The anchorage waiting rate for cargo ships was about 24 %, and the nightly passing rate for dangerous cargo ships such as chemical vessels and tankers was about 20 %. Although the vessel traffic volume of Yeosu Gwangyang Port increases every year, the vessel traffic routes remain the same. Therefore, the risk of accidents is constantly increasing. The route conditions must be improved by dredging and expanding the available routes to reduce the high risk of ship accidents due to overlapping routes, by removing reefs, and by reinforcing navigational aids. In addition, the entry and exit time for dangerous cargo ships at high-risk ports must be strictly regulated. Advancements in the VTS system can help to actively manage the traffic of small vessels using the coastal area traffic route.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.467-475
• /
• 2013

In order to seize quantitative materials as part of studies on measures for oil pollution prevention and control, the statistics of oil pollution incidents in Korean coastal waters for 10 years from 2003 to 2012 were analyzed with relation to the number of oil spills and the volume of oil spilt according to causes, sources and sea areas of spills. Total number and total volume of oil spills for 10 years were found to be 2,833 cases and 17,877 kL, respectively. 50.4 %(1,429 cases) of total number of oil spills were caused by negligence, although oil spillage due to negligence was 294 kL(1.7 %). While oil spillage caused by marine accidents was 17,400 kL(97.3 %), marine accidents accounted for 27.9 %(790 cases) of total number of oil spills. While negligence had a great influence on the number of oil spills, marine accidents had a huge impact on the amount of oil spilt. Fishing boats accounted for 42.7 %(1,210 cases) of the number of oil spills, and although oil tankers accounted for 9.2 %(261 cases) of the number of oil spills, oil spillage from oil tankers was 15,488kL(86.7 %). It means that oil tankers such as VLCC or ULCC may be the main sources of major oil spills and a few very large spills are responsible for a high percentage of the amount of oil spilt. While the number of oil spill incidents was closely related to the accidents of fishing boats, the volume of oil spilt was greatly affected by the major oil spill incidents of oil tankers such as M/T Hebei Spirit. The number and volume of oil spills were shown to be 1,613 cases(56.9 %) and 3,804 kL(21.3 %) in South Sea, 700 cases(24.7 %) and 13,501 kL(75.5 %) in West Sea, and 520 cases(18.2 %) and 572 kL(3.2 %) in East Sea of Korea, respectively. The highest number of oil spills was found in South Sea and the most volume of oil spilt was shown in West Sea of Korea for 10 years.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.662-669
• /
• 2018

Recently, the installation of submarine power cables is under consideration due to the increase of electric power usage and the development of the offshore wind farm in island areas, including Jeju. In order to protect power cables installed on the seabed, it is necessary to calculate the burial depth based on the characteristics of anchoring, dragging and fishing, etc. However, there is no design standard related to the size of target ships to protect the cables in Korea. In this study, we analyzed the design standards for the protection of domestic submarine pipelines similar to submarine cables, and developed the risk matrix based on the classification by emergency anchoring considering the installation environment, then designed the size of target ships according to the cumulative function scale by ship size sailing through the sea concerned. Also, we linked marine accident conditions, such as anchoring, dragging, etc. and the environmental conditions such as current, sea-area depth of installation etc. to the criteria of the protection of submarine cable, and examined the size of specific target ships by dividing the operating environment of ships into harbor, coastal and short sea. To confirm the adequacy and availability of the size of target ships, we verified this result by applying to No. 3 submarine power cables, which is to be installed in the section from Wando to Jeju Island. This result is expected to influence in the development of a protection system for submarine cables and pipelines as well as the selection of anchor weight according to the determination of burial depth.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.152-154
• /
• 2014

우리나라 항만 입출항 통항 선박의 대형화, 고속화에 따른 해양안전사고가 증가하고 있어 항만 연안 해역에서의 해상교통안전 확보가 절실히 요구되고 있는 실정으로, 최근 국제항로표지협회(IALA)에서 항로표지 설계와 배치계획에 대한 의사결정을 지원할 수 있는 항로표지 전문 기능 시뮬레이터의 개발과 주요 항로의 항로표지 설계 및 계획 등을 검증할 수 있는 시스템 필요성을 제기하였다. 우리나라 주요 항로의 항로표지 설계와 적정 배치 여부 등을 검증하고 보완할 수 있는 시뮬레이션 시스템에 대한 개발이 진행되고 있다. 항로표지 3D 모델에 대한 항로표지 종류별, 속성별 세부사항을 검토하여 다양한 조합이 가능하도록 DB를 구성하였다. 항로표지 3D 모델링 작업데이터에 대하여 각 항로표지 시설물별 조합 경우의 수를 고려하여 다양한 조합이 가능하도록 DB 분류작업을 수행하였으며 항로표지별 폴리건수에 따른 샘플형상을 비교하여 시인성이 양호한 최소한의 폴리건 수(안) 제시하는 등 항로표지 시뮬레이션을 위한 항로표지 3D 구현 방식을 검토하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.344-346
• /
• 2014

우리나라 항만 입출항 통항 선박의 대형화, 고속화에 따른 해양안전사고가 증가하고 있어 항만 연안 해역에서의 해상교통안전 확보가 절실히 요구되고 있는 실정으로, 최근 국제항로표지협회(IALA)에서 항로표지 설계와 배치계획에 대한 의사결정을 지원할 수 있는 항로표지 전문 기능 시뮬레이터의 개발과 주요 항로의 항로표지 설계 및 계획 등을 검증할 수 있는 시스템 필요성을 제기하였다. 우리나라 주요 항로의 항로표지 설계와 적정 배치 여부 등을 검증하고 보완할 수 있는 시뮬레이션 시스템에 대한 개발이 진행되고 있다. 항로표지 시뮬레이션 수행을 위하여 AtoN Manager 운영에 필요한 항로표지 속성 및 항로표지 3D 모델에 대한 항로표지 종류별, 속성별 세부사항을 검토하여 다양한 조합이 가능하도록 DB를 구축하였다. 또한, 항로표지 3D 모델링 작업데이터에 대하여 각 항로표지 시설물별 조합 경우의 수를 고려하여 시뮬레이션 구현 시 조합 가능한 항로표지 종류별 실시간 제어속성 항목을 검토하여 DB 분류작업을 수행하였으며 시뮬레이션을 위한 항로표지 3D 구현 방식을 검토하였다.