• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.82-88
• /
• 2002

In this paper, we proposed a audio indexing method that is used wavelet transform for audio data retrieval. It is difficult for audio data to make a efficient audio data index because of its own particular properties, such as requirement of large storage, real time to transfer and wide bandwidth. An audio data in del using wavelet transform make it possible to index and retrieval by using the particular wavelet transform properties. Our proposed indexing method doesn't separate data to several blocks. Therefore we use both high-pass and low-pass parts of last level coefficient of wavelet transform. Audio data indexing is made by applying the string matching algorithm to high-pass part and zero-crossing histogram to low-pass part. These are transformed to the continued strings, Through this method, we described a retrieval efficiency. The retrieval method is done by comparing the database index string to the query string and then data of minimum values is chosen to the result. Our simulation decided proper comparative coefficient and made known changing of retrieval efficiency versus audio data length. The results show that the proposed method improves retrieval efficiency compared to conventional method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.4
• /
• pp.255-264
• /
• 2001

This study was conducted to investigate changes in inorganic phosphorus fractions in phosphorus accumulated plastic film house soils under cropping condition. Pot experiment was conducted with surface soils taken from plastic film house fields cultivated for 3, 8 and 16 years. Phosphorus fertilizer was applied at the rates of 0 (P0), $100kg\;ha^{-1}$ (recommended application rate. P1) and $200kg\;ha^{-1}$ (P2) as fused phosphate. Crops were grown sequentially in the order of corn-Chinese cabbage-Chinese cabbage-corn for 3 years. The content of easily soluble-P fraction was decreased with cropping. There were significantly positive relationship not only between the contents of easily soluble-P and the amounts of soil available P ($r=0.839^{**}{\sim}0.952^{**}$ for Bray-1 P, $r=0.895^{**}{\sim}0.967^{**}$ for Lancaster P, and $r=0.491^{**}{\sim}0.821^{**}$ for Olsen P), but also between the amounts of P absorbed by plants and the amounts of easily soluble P decreased ($r=0.644^{**}{\sim}0.822^{**}$). The decrease of easily soluble-P during cropping period could be described by a first-order reaction. The number of cropping times needed to decrease the content of easily soluble-P to an index level of $0.2mg\;kg^{-1}$, which is commonly reported as the desired concentration for soil P, was predicted in the range of 26~33 cropping times by using the equations. Regardless of P fertilization, the proportion of Al-P to total P was little varied during cropping period, but the proportion of Fe-P to total P increased with cropping. Although the content of Ca-P was high before cropping, the proportion of Ca-P to total P was increased with cropping. The proportion of reductant soluble-P to total P was little varied for P fertilizer treatment but was increased for no P fertilizer treatment. The residual-P was decreased during cropping period due to the absorption by crops and the conversion to other inorganic P fractions.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.3 no.2
• /
• pp.47-57
• /
• 1995

The purpose of this study was to investigate the effect of mechanical mixing intensity on composting. The major parameters investigated were the mixing intensity and initial moisture content. Laboratory scale composting reactors with mixing equipment were used in this study. Wastes used for the study were raw nightsoil sludge, nightsoil sludge after vacuum evaporation treatment and pig manure. When moisture contents were 60% and 63%, amount of organic material degraded in the continuous mixing reactors was higher than that in the intermittent mixing reactors. Compost produced from reactors with continuous mixing had better texture than that obtained from reactors with intermittent mixing. When moisture content was 68%, organic waste was kneaded rather than mixed in the continuous mixing reactors. Amount of organic material degraded in the continuous mixing reactors also was lower than that in the intermittent mixing reactors.

• Journal of the KSME
• /
• v.34 no.4
• /
• pp.262-276
• /
• 1994

본 연구를 통하여 3차원 LDV 시스템의 측정기법을 개발하였으며, 측정결과의 신뢰성을 확인하 였다. 또한 이것을 타원제트 연구에 적용함으로써 그 응용 가능성을 확인하였다. 앞으로 3-D LDV 시스템을 사용하여 신뢰성 있는 측정결과를 얻기 위해서는 아래에 기술한 몇 가지 사항을 고려하여야 한다. 1) 3차원 레이저 유속계는 정교하고 복잡한 광학시스템으로 정확한 배열을 요구한다. 광학계와 실험장치의 좌표축이 일치하지 않으면 축방향보다 측방향(lateral) 속도변동 성분에 큰 영향을 준 다. 2) LDV 측정에서 속도편심을 줄이기 위해서는 적당한 출력의 레이저, 적절한 신호처리(signal conditioning), 실험조건에 알맞는 입자를 선정하여야 한다 3) 입자를 연속적으로 균일하게 공급하여야하며 신호분석기 조작에 익숙하여 도플러신호의 질을 최적화하여야 한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.4
• /
• pp.38-45
• /
• 2003

This paper presents a meta-heuristic solution technique, Ant System (AS)algerian to solve edge detection problem. We define the quality of edge in terms of dissimilarity, continuity, thickness and length. We cast edge detection as a problem in cost minimization. This is achieved by the formulation of a cost function that inversely evaluates the quality of edge configuration. Twelve windows for enhancing dissimilarity regions based on the valid edge structures are used. The AS algorithm finds the optimal set of edge pixels based on the cost function. The experimental results show that the properly reduced set of edge pixels could be found regardless how complicated the image is.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.940-947
• /
• 2010

Motion Compensated Frame Interpolation(MCFI) has been used to reduce motion jerkiness for dynamic scenes and motion blurriness for LCD-panel display as post processing for high quality display. However, MCFI that directly uses the motion information often suffers from annoying artifacts such as blockiness, ghost effects, and deformed structures. So in this paper, we propose a novel edge-based adaptively weighted vector median filter as post-processing. At first, the proposed method generates an edge direction map through a sobel mask and a weighted maximum frequent filter. And then, outlier MVs are removed by average of angle difference and replaced by a median MV of $3{\times}3$ window. Finally, weighted vector median filter adjusts the weighting values based on edge direction derived from spatial coherence between the edge direction continuity and motion vector. The results show that the performance of PSNR and SSIM are higher up to 0.5 ~ 1 dB and 0.4 ~ 0.8 %, respectively.

• Korean Journal of Cognitive Science
• /
• v.10 no.2
• /
• pp.17-25
• /
• 1999

In developing a Korean database interfacing system exist many difficult problems which are not usually pointed out in developing an English version. Basically the difficulty in implementing deep level Korean database interfacing system lies in the fact that Korean has fewer syntactic restrictions. This means that while less burden will be placed on semantic analysis more burden will be placed on contextual processing for Korean when compared to English. This paper discusses various difficulties which we came across while developing a prototype Korean DB interfacing system (the Korean Core L Language Engine) especially focusing on issues of representing and resolving Quasi Logical Forms.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.141-146
• /
• 1998

Ball mill을 이용하여 Ar 분위기에서 기계적 합금법으로 $Fe_{ 5}$$Si_{x}$ $B_{5-x}$ 분말을 제조하고, 제조된 분말을 연속 진공 열처리 시킨 후 Si첨가에 따른 결정구조 및 자기적성질을 조사하였다. 250시간 볼밀처리한 Fe$_{5}$ $B_{5}$ 합금에서 전체적으로 비정질 구조가 형성되었으나 일부분에 결정질이 존재하고 있었으며, $800^{\circ}C$에서 2시간 열처리하면 FeB와 $Fe_{2}$B 상이 혼재된 구조를 얻었다. 250시간 볼밀처리한 $Fe_{5}$ $Si_{2}$$B_{3}$합금에서 전체적으로 비정질 구조를 얻을 수 있었고, 이 시료를 2시간, $800^{\circ}C$로 열처리 하였을 때 $Fe_{2}$B상은 사라지고, 대부분 FeB의 균질한 상을 나타내었다. $Fe_{5}$ $B_{5}$ /조성에서는 분말 입자크기가 약 $1\mu\textrm{m}$이었으나, Si이 첨가되면 분말 입자크기가 약 $10\mu\textrm{m}$로 커졌다. Si의 첨가에 의해서 비정질상의 형성을 촉진시켜 단일 FeB상의 합성시간을 단축시킬 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.481-491
• /
• 2022

This study investigates the characteristics of the GAC adsorption behavior during the operation of a multi-stage cross-flow filtration and GAC adsorption process for the purpose of devising an advanced treatment of combined sewer overflows (CSOs) and evaluates the regeneration efficiency of spent GAC that has reached the design breakpoint. During the filtration process, suspended substances are easily removed, but dissolved organic substances are not removed, necessitating a process capable of removing dissolved organic substances for the advanced treatment of CSOs. In general, GAC adsorption has been applied under low-concentration organic conditions, such as for water purification and tertiary treatments of sewage, and has rarely been applied under conditions with high organic concentrations, such as with sewage or CSOs. Accordingly, this study will provide a new and interesting experience. Also in this study, the continuous operation and breakthrough characteristics of GAC according to the strength of the inflow organic matter were investigated, electrochemical regeneration was applied to the used GAC, and the regeneration efficiency was evaluated through desorption and re-adsorption tests. The results showed that the breakthrough period was 21 days under high concentration conditions, 28 days at medium concentrations, and 32 days under low concentration conditions. The desorption of adsorbed organic matter through electrolysis occurred in the range of 188 to 609 mgCOD/L depending on the electrolysis conditions, and the effect of the electrolyte type led to the finding that NaOH was slightly higher than H₂O₂.

• KSBB Journal
• /
• v.16 no.5
• /
• pp.500-504
• /
• 2001

We scaled up a covalent immobilization system of urokinase to the activated Sepharose and used it repeatedly to cleava a fusion protein consisting of human growth hormone and GST fragment. After scale up from 6 ml to 250 ml. the column system still demonstrated basically the same performance in terms of urokinase immobilization and fusion protein cleavage. When the column was washed with 6 M guanidine HCI after the cleavage reaction, the immobilized urokinase showed no activity probably becasue it was fully unfoled. However, as the denaturant was gradually removed from the column the immobilized urokinase fully regained its bioactivity, which indicated it was properly refolded into is natie conformation as covalently attached to the solid matrix. After 20 cycles of this solid-phase unfolding/refolding. the immobilized urokinase maintained approx. 80% of the initial bioactivity. This method provides and efficient protocol to apply the solid-phase refolding technique to improve the longevity of immobilized enzyme columns.