• Title/Summary/Keyword: 연속웨이블렛 변환

Search Result 21, Processing Time 0.021 seconds

A STUDY ON RINGING BY EXPERIMENT AND CONTINUOUS WAVELET ANALYSIS (Ringing 현상 해석을 위한 실험적 연구와 Wavelet 해석)

  • 권순홍;이희성;이형석;하문근;김용직
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2001.05a
    • /
    • pp.260-265
    • /
    • 2001
  • 본 연구에서는 연속 웨이블렛 변환을 이용하여 Ringing 현상을 연구하였다. 사용되어진 웨이블렛은 Morlet 웨이블렛이었고, 실험은 파수조에서 수행되었다. 또한 Ringing 현상을 다루고자 쇄파를 발생시켰다. 실험에 쓰인 모델은 수면을 통과하여 수직으로 고정된 원주 실린더였고, 이 실린더에 작용된 힘과 파고가 측정되어졌다. 이들은 연속 웨이블렛 변환으로 분석되어졌고, 이러한 분석으로 얻어진 scalogram 들은 고주파 성분이 쇄파 충격시 만들어진다는 사실을 시간영역상에서 보여주었다. 이는 기존의 스펙트럼 분석에서는 찾기 힘든 것이다. Coherence 분석도 위의 결론을 뒷받침해 주었다.

  • PDF

Condition Monitoring in Gear System Using Spike Wavelet Transform (스파이크 웨이블렛 변환을 이용한 기어 시스템의 건전성 감시)

  • 이상권;심장선
    • The Journal of the Acoustical Society of Korea
    • /
    • v.20 no.5
    • /
    • pp.21-27
    • /
    • 2001
  • Impulsive sound and vibration signals in gear system are often associated with their faults. Thus these impulsive sound and vibration signals can be used as indicators in condition monitoring of gear system. The traditional continuous wavelet transform has been used for detection of impulsive signals. However, it is often difficult for the continuous wavelet transform to identify spikes at high frequency and meshing frequencies at low frequency simultaneously since the continuous wavelet transform is to apply the linear scaling (a-dilation) to the mother wavelet. In this paper, the spike wavelet transform is developed to extract these impulsive sound and vibration signals. Since the spike wavelet transform is to apply the non-linear scaling, it has better time resolution at high frequency and frequency resolution at low frequency than that of the continuous wavelet transform respectively. The spike wavelet transform can be, therefore, used to detect fault position clearly without the loss of information for the damage of a gear system. The spike wavelet transform is successfully is applied to detection of the gear fault with tip breakage.

  • PDF

Damage Evaluation of a Structure Using Continuous Wavelet Transform (연속웨이블렛 변환을 이용한 구조물의 손상도 평가)

  • Kim, Han-Sang;Kim, Hyun-Su
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.12 no.6
    • /
    • pp.140-146
    • /
    • 2008
  • The damage evaluation method for framed structures using continuous wavelet transform (CWT) is proposed. CWT is applied to the response acceleration of a structure subjected to earthquake load to decompose the response acceleration corresponding to each scale, then the normalized energy value for each scale is calculated. The difference between the normalized energy curvature (NEC) in each node before and after damage indicates a damaged element, which makes it possible to assess the soundness of structural elements. As damage becomes more severe the difference in normalized energy curvature becomes larger. The NEC calculated from the signal corresponding to high scale in CWT analysis is found to be a good index that shows the location and severity of damage.

Decoupling of Free Decay Roll Data by Discrete Wavelet Transform (이산 웨이블렛 변환을 이용한 자유감쇠 횡요 데이타의 분리)

  • Kwon, Sun-Hong;Lee, Hee-Sung;Lee, Hyoung-Suk;Ha, Mun-Keun
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2001.10a
    • /
    • pp.169-173
    • /
    • 2001
  • This study presents the results of decoupling of free decay roll test data by discrete wavelet transform. Free roll decay test was performed to decide the coefficients of damping terms in equation of motion. During the experiment, a slight yaw motion was found while the model was in the free roll decay motion. Discrete wavelet transform was applied to the signal to extract the pure roll motion. The results were compared to those of the Fourier transform. DWT was able to decouple the two signals efficiently while the Fourier transform was not.

  • PDF

Dynamic Filtering of End-milling Force Using Wavelet Filter Bank (웨이블렛 필터뱅크를 이용한 동적 엔드밀 절삭력 필터링)

  • Cho, Hee-Geun;Chin, Do-Hun;Yoon, Moon-Chul
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.18 no.4
    • /
    • pp.381-387
    • /
    • 2009
  • The end-milling force behaviour is very complex and it is related to a de-noising phenomenon, so it is very difficult to detect and diagnose this static cutting force phenomenon. This paper presents a new method of filtering of end-milling force in end-milling operation using filter bank technique, based on the wavelet transform. In this paper by comparing the history of end-milling force using wavelet filtering the fundamental end-milling property of the wavelet transform is well reviewed and analyzed. This result of wavelet transform using filter bank shows the possible static prediction of end-milling force with severe dynamic properties such as chatter in end-milling operation.

  • PDF

A Study on the Insulation System Diagnosis using the Wavelet Transform Method (웨이블렛 변환 기법을 이용한 절연 시스템 진단에 관한 연구)

  • Jang, Jin-Kang;Lim, Yun-Seog;Lee, Yeong-Sang;Kim, Sung-Hong;Kim, Jae-Hwan
    • Proceedings of the KIEE Conference
    • /
    • 1999.07e
    • /
    • pp.2311-2313
    • /
    • 1999
  • 웨이블렛 기법은 비주기적 신호의 해석에 있어 새롭게 적용되고 있는 방법이다. 이 방법은 Fourier Transform(FT), the Fast Fourier Transform(FFT), Least Square Method 방법과는 달리 시간 -주파수 분석을 통해 비주기적 과도 신호의 감지와 특징 추출이 용이하다. 이에 본 연구에서는 이러한 통계적 기법과는 달리 부분 방전 발생 신호를 시간-주파수 영역에서 연속적으로 분석 가능한 웨이블렛 기법을 이용하여 시간에 따른 절연체의 열화를 해석 및 진단하기로 한다. 부분 방전 현상을 나타내는 데이터는 방대하므로 진단을 위해 해석 정보에서 특정한 특징을 추출하며 이를 바탕으로 체계화된 데이터 베이스를 구성하는 기반을 마련한다. 해석에 필요한 신호는 복합감지 시스템(부분방전 시스템, 음향방출 시스템)을 이용하여 수집하였다.

  • PDF

Implementation of an Efficient Wavelet Based Audio Data Retrieval System (효율적인 웨이블렛 기반 오디오 데이터 검색 시스템 구현)

  • 이배호;조용춘;김광희
    • The Journal of the Acoustical Society of Korea
    • /
    • v.21 no.1
    • /
    • pp.82-88
    • /
    • 2002
  • In this paper, we proposed a audio indexing method that is used wavelet transform for audio data retrieval. It is difficult for audio data to make a efficient audio data index because of its own particular properties, such as requirement of large storage, real time to transfer and wide bandwidth. An audio data in del using wavelet transform make it possible to index and retrieval by using the particular wavelet transform properties. Our proposed indexing method doesn't separate data to several blocks. Therefore we use both high-pass and low-pass parts of last level coefficient of wavelet transform. Audio data indexing is made by applying the string matching algorithm to high-pass part and zero-crossing histogram to low-pass part. These are transformed to the continued strings, Through this method, we described a retrieval efficiency. The retrieval method is done by comparing the database index string to the query string and then data of minimum values is chosen to the result. Our simulation decided proper comparative coefficient and made known changing of retrieval efficiency versus audio data length. The results show that the proposed method improves retrieval efficiency compared to conventional method.

Fault Detection of a Gear with Initial Pitting using the Boomed Phase Map of Continuous Wavelet Transform (연속 웨이블렛 변환의 확대된 위상 지도를 이용한 기어의 초기 퍼팅 결함 진단)

  • Lee, Sang-Gwon;Sim, Jang-Seon
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.25 no.11
    • /
    • pp.1759-1766
    • /
    • 2001
  • Vibration transient generated by developing localized fault in gear can be used as indicators in gear fault detection. In this paper, we propose the zoomed phase map for a fault signal using continuous wavelet transfers to detect this vibration transient. Local fault induces the abrupt fluctuation of load exciting tooth and phase lag in the vibration signal measured on the gearbox. The relatively large fault like "tip breakage" easily can be detected by the clear fluctuation of exciting load. However, minor fault like "initial pitting"cannot be detected using the load fluctuation. To defect this kind of minor fault, the phase map for a fault signal is taken into account. The phase lag by minor fault is observed well in the zoomed phase map.

Damage Detection Using the Lipschitz Exponent Estimation by the Continuous Wavelet Transform : Applied to Vibration Mode Shapes in a Beam (연속웨이블렛 변환에 의한 립쉬츠 지수 평가를 이용한 결함 진단 : 보의 진동모드를 대상으로)

  • 홍진철;김윤영;이호철;이용욱
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2001.11b
    • /
    • pp.1182-1188
    • /
    • 2001
  • The objective of this paper is to show the effectiveness of the wavelet transform by means of its capability to estimate the Lipschitz exponent. In particular, we show that the magnitude of the Lipschitz exponent can be used as a useful tool estimating the damage extent. An effective method based on the Lipschitz exponent is proposed and we present the results investigated both numerically and experimentally. The continuous wavelet transform by a Mexican hat wavelet having two vanishing moments is utilized for the estimation of the Lipschitz exponent.

  • PDF

Fault Diagnosis for Rotating Machinery with Clearance using HHT (HHT를 이용한 간극이 있는 회전체의 고장진단)

  • Lee, Seung-Mock;Choi, Yeon-Sun
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2007.11a
    • /
    • pp.895-902
    • /
    • 2007
  • Rotating machinery has two typical faults with clearance, one is partial rub and the other is looseness. Due to these faults, non-linear and non-stationary signals are occurred. Therefore, time-frequency analysis is necessary for exact fault diagnosis of rotating machinery. In this paper newly developed time-frequency analysis method, HHT(Hilbert-Huang Transform) is applied to fault diagnosis and compared with other method of FFT, SFFT and CWT. The results show that HHT can represent better resolution than any other method. Consequently, the faults of rotating machinery are diagnosed efficiently by using HHT.

  • PDF