• Title/Summary/Keyword: 연소 배출물

Search Result 221, Processing Time 0.026 seconds

Investigation on emission characteristics of nitrous oxide from marine diesel engine (선박용 디젤엔진에서 아산화질소의 배출특성에 대한 연구)

  • Yoo, Dong-Hoon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.38 no.9
    • /
    • pp.1051-1056
    • /
    • 2014
  • Nitrous oxide ($N_2O$) is naturally generated from biological activity, such as bacteria's material exchange. However, recent $N_2O$ concentration in the atmosphere has being increased by the human activities such as industrial growth. One of factors to increase $N_2O$ concentration in the atmosphere is a $N_2O$ emission caused by the combustion of marine fuel oils. The marine transportation presently handles over 99 percent of the international freight cargoes and the number of ship is continuously increasing with increment of cargoes. In this study, author conducted a series of the experimental investigations on which combustion of fuels containing different element concentrations used in a 4-stroke marine diesel engine affect $N_2O$ emissions in the exhaust gas. Moreover, it is assessed on the extent to which fuel combustion patterns in the combustion chamber affect $N_2O$ emissions.

A Study on the Reduction of NO Emission from a Diesel Engine with 2-Stage Type Combustion Chamber (2단 연소형 연소실을 갖는 디젤기관의 NO 저감에 관한 연구)

  • 진선호;배종욱
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.26 no.5
    • /
    • pp.554-564
    • /
    • 2002
  • A newly designed combustion chamber of diesel engine with a modified piston crown was prepared for the purpose of investigation for reduction of NO emission. It was intended to realize 2-stage combustion that is to keep fuel rich condition during early stage of combustion and fuel lean condition during next stage. The engine was tested on various conditions concerning exhaust gas emissions especially about NO emission and simultaneously fuel consumption rate. It was found that the engine with 2-stage combustion type piston emits significantly low NO at various speed and torque compared with conventional engines, but it raised points at issue in CO and smoke emissions with fuel consumption rate. The increasing of injection pressure on 2 stage combustion type diesel engine affects on CO and smoke emission considerably to reduce but slightly on NO to increase. The effect of 2-stage combustion was better at low speed than at high speed.

Stabilization of Abnormal Combustion of Dry Low NOx Gas Turbine Combustor for Power Generation (발전용 저 NOx 가스터빈의 연소불안정 및 열유동 안정화)

  • 안달홍;서석빈;정재화;박호영;차동진;김종진
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 2003.05a
    • /
    • pp.513-516
    • /
    • 2003
  • 가스터빈 복합발전은 우리나라 총 발전설비 용량의 약 25%를 차지하고 있다. 따라서 이들 가스터빈의 안정적인 운전을 위한 연소관리기술의 개발이 필요하며, 특히 발전설비의 대기오염물 배출기준이 점차 강화됨에 따라 가스터빈의 저NOx 연소 운영기술의 확보가 필수적이다. 국내에는 서인천복합, 신인천복합, 울산복합 및 보령복합 발전소 등에 건식 저 NOx 연소기가 설치되어 운영 중에 있으며 신규 건설중인 복합발전소에는 모두 이들이 설치될 예정이다.(중략)

  • PDF

Control Method for Metallic Particles from the Incineration System by Spraying the Inorganic Slurry (무기질 슬러리 분사에 의한 소각공정 중 납성분 금속성 입자의 제어방법 연구)

  • 장혁상;박증배
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2003.05b
    • /
    • pp.379-380
    • /
    • 2003
  • 연소나 폐기물 감량화 처리를 위해 이루어지는 소각과정에서 방출되는 대기오염물질은 소각재의 다양한 특성으로 인해 배출물의 특성파악이 매우 어렵고 그로 인해 제어에 많은 어려움을 겪고 있다. 연소 혹은 소각과정에서 에어로졸을 제어하는 것은 대기 중에서 발견되는 중금속성분을 근본적으로 줄이는 기본적인 조치로서 상당히 중요한 역할을 한다(Natusch and Wallace, 1974; Oppelt, 1986; Oberdorster et al., 1995). 본 연구에서는 소각공정에서 금속성 에어로졸 형태로 배연기체 중에 혼합되어 배출되는 여러 가지 금속성분 중 양적으로 많이 배출되는 납성분의 제어를 위한 기초연구를 수행하였다. (중략)

  • PDF

Analysis of Carbon Emissions According to Combustion of Surface Fuels (지표연료의 연소에 따른 탄소배출량 분석)

  • Park, Young Ju;Lee, Hae Pyeong;Kim, Min Jung;Kim, Hae Rim
    • 한국방재학회:학술대회논문집
    • /
    • 2011.02a
    • /
    • pp.192-192
    • /
    • 2011
  • 교토의정서에서 지구온난화의 원인이 되는 온실가스로 $CO_2$, $CH_4$, $N_2O$, HFCs, PFCs, $SF_6$를 규제하고 있다. 규제하는 6대 온실가스 가운데 $CO_2$가 가장 대표적이며, 우리나라의 연료연소에 의한 $CO_2$ 배출량은 세계 10위로 기후변화 진행속도는 세계 평균속도보다 빠르게 진행되고 있다. 이러한 기후변화에 대응하기 위하여는 온실가스 배출로 인한 DB구축 연구가 선행되어야 하며, 산림부분에 있어서는 연료의 열적특성 구명 연구가 극도로 미진한 국내현실에서 기초 data 확보를 위한 연구가 시급한 실정이다. 따라서, 본 연구에서는 산불발생 시 온실가스 배출량의 DB를 구축하기 위하여 산불발생 시 배출되는 탄소배출량을 예측하고자 산림 가연물의 연소실험을 수행 하였다. 연소실험은 산림 연료 가운데 지표연료 10가지(소나무낙엽, 굴참나무낙엽, 소나무솔방울, 밤나무밤송이껍질, 방아풀, 주름조개풀, 칡, 엉겅퀴, 김의털, 고비)를 대상으로 콘칼로리미터 장비를 이용하여 이산화탄소와 일산화탄소 배출량을 분석하였다. 탄소배출량 실험에 앞서 지표연료들의 함수율을 측정한 결과, 10가지 지표연료 가운데 고사한 연료(낙엽, 솔방울, 밤송이)는 9~24% 정도, 생연료인 초본류 6가지는 181~484% 정도인 것으로 나타났으며, 솔방울과 밤송이의 경우 9~10%로 가장 수분을 적게 함유하고 있음을 알 수 있었다. 탄소배출량 분석 결과, 50g 중량에 대한 10가지 지표연료들의 이산화탄소 총배출량은 28~98g 정도, 일산화탄소 총배출량은 0.76~4.08g 정도 배출하는 것으로 나타나 연료별 차이를 보였으며, 특히, 고사한 연료와 생연료의 탄소배출량 차이는 큰 것으로 나타났다. 일산화탄소 총배출량은 고사한 연료(소나무낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이)는 3.24~4.08g 정도, 생연료 초본류 6가지(방아풀, 주름조개풀, 칡, 엉겅퀴, 김의털, 고비)는 0.76~2.73g 정도 배출하는 것으로 나타났다. 이산화탄소 총배출량은 함수율이 현저히 낮은 4가지 연료(소나무 낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이 껍질)들은 52~98g 정도, 함수율이 높은 6가지 초본류는 28~48g 정도의 이산화탄소를 배출하는 것으로 나타났다. 따라서, 고사한 연료인 소나무 낙엽, 굴참나무 낙엽, 소나무 솔방울, 밤나무 밤송이는 초본류 보다 상대적으로 이산화탄소와 일산화탄소 배출량이 많은 것으로 나타났으며, 특히, 소나무 솔방울은 가장 많은 이산화탄소와 일산화탄소를 배출하는 것으로 나타났다. 상대적으로 방아풀과 주름조개풀은 각각 28g과 35g으로 이산화탄소 배출량이 작은 것으로 나타났다. 따라서, 산불발생 시, 소나무의 솔방울은 10가지 지표연료 가운데 상대적으로 많은 이산화탄소와 일산화탄소를 배출할 것으로 사료된다.

  • PDF

Combustion and Nano-particulate Emissions Characteristics of a Compression Ignition Engine Fueled with Biodiesel according to EGR Ratio (바이오디젤을 적용한 압축착화 엔진에서 EGR율에 따른 연소 및 미세입자 배출물 특성)

  • Cha, June-Pyo;Yoon, Seung-Hyun;Lee, Chang-Sik
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.18 no.6
    • /
    • pp.98-104
    • /
    • 2010
  • An experimental investigation was conducted to analyze the effects of EGR ratio on the combustion, exhaust emissions characteristics and size distributions of particulate matter in a single cylinder diesel engine with common-rail injection system fueled with biodiesel derived from soybean. In order to analyze the combustion, exhaust emissions and measurement of size distributions of particulate matter were carried out under various EGR ratio which was varied from 20~60% and the results were compared to those of results without EGR. The experimental results show that ignition delay was extended and maximum value of rate of heat release (ROHR) was decreased according to increasing of EGR ratio. In addition, oxidies of nitrogen ($NO_x$) emissions were reduced but soot emissions were increased under increasing of EGR ratio. However, under higher EGR ratio region, soot was slightly decreased. And then the particulate size distribution shows that high exhaust gas temperature restrain the formation of soluble organic fraction (SOF) which were beyond the accumulation mode (100~300nm) and lead to increase of nuclei mode particles.

The Effect of Multiple Injections on the Stability of Combustion and Emissions Characteristic in a Passenger Car Diesel Engine (승용차 디젤엔진의 연료 다단 분사가 연소 안정 및 배출물 특성에 미치는 영향)

  • Roh, Hyun-Gu;Lee, Chang-Sik
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.15 no.4
    • /
    • pp.76-82
    • /
    • 2007
  • This paper described the effect of the multiple injections on the stability of combustion and emission characteristics in a direct injection diesel engine at various operating conditions. In order to investigate the influence of multiple injections in a diesel engine, the fuel injection timing was varied one main injection and two pilot injections at various conditions. The experimental apparatus consisted of DI diesel engine with four cylinders, EC dynamometer, multi-stage injection control system, and exhaust emissions analyzer. The combustion and emission characteristics were analyzed for the main, pilot-main injection, pilot-pilot-main injection strategies. It is revealed that the combustion pressure was smoothly near the top dead center and the coefficient of variations is reduced due to the effect of pilot injection. Also, $NO_x$ emissions are dramatically decreased with pilot injection because the decrease of rate of heat release. However, the soot is increased at early pilot injection and main injection.

An Experimental Study on Effect of Plasma for Exhaust Emissions in Small High-Speed Diesel Engine (소형 고속 디젤기관의 배기 배출물에 미치는 플라스마의 영향에 관한 실험적 연구)

  • 이승규;조기현;황의현;박성규
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 1999.07a
    • /
    • pp.118-123
    • /
    • 1999
  • 화석연료의 연소에 의해 발생되는 질소산화물(NOx)은 가스상의 대기오염물질로서 인류의 생활환경에 유해함은 물론 식물의 생장속도에도 막대한 영향을 미치고 있으며, 질소산화물은 햇빛의 존재 하에서 탄화수소와 광화학 반응을 하여 광화학적 산화물과 오존 등을 생성하는 광화학적 스모그 생성에 관여하고, 이러한 광화학 스모그는 사람에게 만성의 호흡기 질환을 유발하거나 시정거리의 감소를 가져온다. (중략)

  • PDF

Study on Fuel Specificity and Harmful Air Pollutants Factor of Agglomerated Wood Charcoal (시중에 유통되고 있는 성형목탄의 연료특성과 유해인자에 대한 연구)

  • JEOUNG, Taek Yong;YANG, Seung Min;KANG, Seog Goo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.48 no.2
    • /
    • pp.253-266
    • /
    • 2020
  • This study selected three types of agglomerated wood charcoal (Agglomerated wood charcoal with charcoal powder, Carbonized wood briquette, Ignition-type of perforated charcoal) that are in circulation in Korea among fuel-type wood products and analyzed the fuel characteristics, harmful substance content, and emissions of air pollutants generated by combustion. The first results showed that charcoal-grilled carbon, which is the raw material of charcoal, produced higher CO than saw-billed carbon. The second result is that the emission standards of air pollutants generated by the combustion of molded wood coal are not up to the emission standards of nitrogen oxides and sulfur oxides in the entire product, compared with the emission criteria of the atmospheric environment preservation method (based on 2019, carbon monoxide: 200 ppm, nitrogen oxides, 150 ppm sulfur oxides: 100 ppm), but the carbon dioxide moulding and carbon dioxide levels were not up. Based on the analysis of combustion gas generated during combustion derived from this study, future research is needed for comparing with the emission standards of pellets, which are wood products for fuel, among the existing biomass burning standards and for reducing carbon monoxide generated during incomplete combustion of agglomerated wood charcoal.

Combustion and Emission Characteristics of 4 Cylinder Common-Rail DI Diesel Engine with Biodiesel Blended Fuel (4 실린더 직접분사식 디젤엔진에서 바이오디젤 혼합연료의 연소 및 배기특성)

  • Lee, Dong-Gon;Roh, Hyun-Gu;Choi, Seuk-Cheun;Lee, Chang-Sik
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.35 no.2
    • /
    • pp.137-143
    • /
    • 2011
  • This paper describes the effects of biodiesel blended fuel on the engine combustion and emission characteristics in a four cylinder CRDI(Common-rail direct injection) diesel engine. In this work, the biodiesel-diesel blended fuel(20% of biodiesel and 80% of ULSD(ultra low sulfur diesel) by volume ratio, BD20) and ULSD fuel are used under the various injection pressures and engine speeds. The experimental results of BD20 and ULSD fuel show that NOx emissions were increased and soot emissions were decreased with the increase of injection pressure. In particular, NOx emissions were slightly increased for the BD20 fuel, however, soot emissions were significantly reduced compared to the ULSD fuel. When the engine speed is increased from 1000rpm to 2000rpm, NOx emissions are decreased at all tested conditions, and soot emissions are largely increased at lower injection pressure.