• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.231-235
• /
• 2009

The mainly objectives of this study was a combustion dynamics and instability characteristics in a model dump type combustor which is scale down of GE 7FA+e DLN 2.6 gas turbine combustor with running at Seo-Inchon combined cycle power plant. Model gas turbine injector has 2-stage swirl vane and it's reduced 1/3 size of the original one. The shape of plenum and combustor were designed for similar acoustic characteristics. As the result, this research have been shows the peak frequency of model combustor was changed quarter-wave mode to Helmholtz resonator mode in plenum and longitudinal mode in dump combustor at unstable flame conditions caused by the different of combustor temperature and fuel-air mixture distributions.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.166-174
• /
• 2015

This study examined combustion characteristics by selecting the fuel which have a different physical properties compared to gasoline in order to examine the effects of vehicle performance and environment depending on the physical properties. The experiment examined the combustion characteristic in the optimum ignition timing according to the physical properties change and the lean burn by performing control about ignition timing and air-fuel ratio for each fuel, and it was also evaluated the exhaust gas according to the experiment. We used a single-cylinder engine for the experiment, and tested for gasoline properties change by selecting a fake fuel that beyond the fuel quality standards in 석대법. As a result, in the case of the selected fuel showed a difference in Octane and distillation characteristics, vapor pressure and it was also found to unstable combustion, and leads to a large amount of harmful exhaust gas.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.251-257
• /
• 2012

This work presents an experimental investigation of NOx emissions according to inlet air temperature (550-660 K), stoichiometric air ratio (${\lambda}$, 1.4-2.1), and elevated pressure (2-5 bar) in a High Press Combustor (HPC) equipped with a double cone burner, which was designed by Pusan Clean Coal Center (PC3). The exhaust-gas temperature and NOx emissions were measured at the end of the combustion chamber. The NOx emissions generally decreased as a function of increasing ${\lambda}$. On the other hand, NOx emissions were influenced by ${\lambda}$, inlet air temperature and pressure of the combustion chamber. In particular, when the inlet air temperature increased, the flammability limit was extended to leaner conditions. As a result, a higher adiabatic temperature and lower NOx emissions could be achieved under these operation conditions. The NOx emissions that were governed by thermal NOx were greatly increased under elevated pressures, and slightly increased at sufficiently low fuel concentrations (${\lambda}$ >1.8).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.139-143
• /
• 2011

금속분말을 청정 에너지원으로 이용하기 위해 금속분말 소형 연소기의 구현이 필요하다. 이를 위한 기초 연구로서 점화성이 뛰어나면서도 경제적인 수십 마이크로 크기의 마그네슘(Mg) 분말을 대상으로 고온 증기(steam)와의 연소 현상 대해 연구하였다. 본 연구에서는 연소실 내 체류시간 및 혼합 효율을 증가시키기 위해 와류 유동을 연소기에 적용하였고 아르곤(Ar) 이송가스를 이용해 마그네슘 분말을 공급하였다. 안정한 화염을 유지시키기 위하여 이송가스의 유량을 변화시켜 공급되는 마그네슘의 양을 조절하였고, 고온 증기의 공급량은 니들 밸브의 개도를 조정하거나 우회시킨 관로로 증기의 일부를 배출함으로써 조절하였다. 고온의 점화원을 사용하여 증기 분위기 내 마그네슘 분말을 점화시켜, 대기압 환경에서 마그네슘/증기/아르곤의 지속적인 화염을 구현하였다.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.85-91
• /
• 2023

In this study, an experimental study was conducted on the flame behavior, combustion dynamics, and NOx emission characteristics for hydrogen co-firing with the EV burner which is the first stage combustor of GT24. It was confirmed that as the hydrogen co-firing rate increases, the NOx emission increases. This change was elucidate to be the result of a combination of changes in penetration depth due to changes in fuel density, reduction in fuel mixing due to changes in flame position due to increased flame propagation speed, and oscillation of fuel mixedness due to combustion instability. Through pressurization tests in the range of 1.3 to 3.1 bar, NOx emission characteristics under high-pressure operating conditions were predicted, and based on this, the hydrogen co-firing limits of the EV burner was evaluated.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.23-32
• /
• 1993

스파크 점화기관의 연소과정 해석은 엔진성능분석 및 예측의 핵심이며 배기가스 배출과도 밀접히 연관된다. 스파크 점화기관의 연소해석을 수행하기 위해 연소실 압력 측정, 유사 차원 해석, 3차원 유동 및 연소 해석을 수행하여 결과를 비교하였다. 이들 방법은 서로 일치하는 경향을 보이며 상호간의 장단점을 보완하는 역할을 할 수 있음을 알 수 있다. 본 연구는 이러한 시도의 첫번째 결과로서 계속적인 비교 연구가 수행될 예정이다.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.267-273
• /
• 2003

Emulsion fuel is a very attractive fuel because of its energy saving and pollution prevention properties. We investigated and compared the combustion efficiency of B-C oil and emulsion fuel i.e. fuel made from the mixture of B-C oil and waste water. By installing an R-type thermocouple and an optical pyrometer on each side of the boiler, and by placing a combustion analyzer at the point of gas emissions, We were able to measure and compare each flame temperature, combustion rate and the concentration of emitted gas when B-C oil and emulsion fuel are burned. The following results were obtained: The flame temperature of emulsion fuel at the front and rear of the boiler is about 50$^{\circ}C$ lower than the flame temperature of B-C oil. The reason for this difference in temperature is that both latent and sensible heat is lost due to the moisture in the waste water of emulsion fuel. An analysis of emitted gases shows that when emulsion fuel is used polluting substances decrease also the concentration of CO becomes considerably lower. The combustion efficiency for B-C oil and emulsion fuel is 85.5% and 84.8% respectively.

• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.46-51
• /
• 2016

This study is analyzed by the test equipment of gas analyzer in order to discover the gas characteristics of industrial plastic under the pyrolysis and combustion. As results, first, the pyrolysis of polycarbonate was started at $400{\sim}450^{\circ}C$. The combustion started at about $608^{\circ}C$, and the weight decreased at the velocity was 0.03g/min. Second, in case of polyethyleneterephtalate, PET was finished at $620^{\circ}C$ after starting pyrolysis from $420^{\circ}C$, and the weight decreased at the velocity of 0.044g/min. The pyrolysis velocity with the temperature of polyethyleneterephtalate rising was becoming slow and the pyrolysis temperature was higher with less added polyethyleneterephtalate.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.421-422
• /
• 2001

화력발전소의 보일러를 포함한 모든 연소설비의 NOx배출 규제치가 대기오염 방지를 위해 전 세계적으로 강화되고 있는 추세이다. 정부에서도 배출허용기준을 강화하여 기체연료 사용 발전설비에 대하여 기존 설비의 경우 150ppm(4% $O_2$), 신규 설비의 경우 50ppm(4% $O_2$)이 법적규제치로 설정될 전망이며, 총량규제에 따른 배출량 최소화 정책으로 법적 규제치 뿐만 아니라 배출량의 최소화도 요구되고 있다. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.06a
• /
• pp.180-185
• /
• 2000

연료로 사용하는 가연성 가스의 양이 증가함에 따라 가스 사고 건수도 증가하고 있으며 가스사고 중 약 35% 정도가 가스의 누설사고였다. 이러한 가스의 누설사고는 일정시간 경과 후 적절하게 배출되지 못할 경우 화재나 폭발사고로 이어질 위험성이 매우 크다. 즉 가스의 누출은 폭발이나 연소의 3요소 중에서 가연물이 제공되는 과정으로 가스폭발사고나 화재를 예방하기 위해서는 근본적으로 가스의 누출을 방지해야 한다. (중략)