• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.131-134
• /
• 2015

국내 천연가스 열량제도를 현행 표준 열량제 $10,400kcal/Nm^3(43.54MJ/Nm^3)$에서 중간 조정기간을 두고 2012.07.01부터는 최저 $10,100kcal/Nm^3(42.28MJ/Nm^3)$을 유지하고 2015년 이후 $9,800(41.1MJ/Nm^3){\sim}10,600kcal/Nm^3(44.4MJ/Nm^3)$ 열량범위제도로 변경 추진되고 있다. 산업현장에서 열량변동을 측정하여 공연비 제어기술을 개발하고자 60ton Al 용해로에 열량대응기술 개발을 위한 내용으로 열량측정시스템설치 및 열량 값과 연계하여 공연비 제어기술개발연구 내용으로 결과는 다음과 같다. 단순히 표준열량으로 에 맞춰 프로그램된 제어로직에 열량변동에서 검출된 신호를 이용하여 연료보정 값을 추가한 로직을 재구성할 필요가 있다. 이 혀장의 경우는 용탕의 온도가 목표온도 근처까지 올리기가 어려워진 상황으로 주로 공급열량 저열량화에 따른 과잉공기영향으로 온도상승이 어려워 보이며 적절한 공연비로 최적화 되면 이러한 문제가 개선되리라 생각된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.28-37
• /
• 2002

Acoustic behavior in combustion chamber with acoustoc cavity is numerically investigated by adopting linear acoustic analysis. Helmholtz-type resonator is employed as a cavity model to suppress acoustic instability passively. The tuning frequency of acoustic cavity is adjusted by varying the sound speed in acoustic cavity. Through harmonic analysis, acoustic pressure responses of chamber to acoustic oscillating excitation are shown and the resonant acoustic modes are identified. Acoustic damping effect of acoustic cavity is quantified by damping factor. As the tuning frequency approaches the target frequency of the resonant mode to be suppressed, mode split from the original resonant mode to lower and upper modes appears and thereby damping effect is degraded significantly. Considering mode split and damping effect as a function of tuning frequency, it is desirable to make acoustic cavity tuned to maximum frequency of those of the possible splitted upper modes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.717-724
• /
• 2020

We study the closing characteristics of a self-sustainable poppet valve which serves as a main oxidizer shut-off valve for liquid rocket engines. Numerical analysis for predicting closing transient responses are presented and the calculated results have been verified by a comparison with experimental data. The effective area of a pilot gas discharge system and the pressure distribution of passage flow around the valve moving part are shown to be main parameters in determining the closing characteristics for dry and cryogenic conditions, respectively. Moreover, it is presented that the passage flow pressure at the valve closing moment as well as the valve closing velocity can be effectively adjusted by the appropriate employment of the pilot gas.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.243-247
• /
• 2007

Fuel mass flux was experienced with a function of the oxidizer mass flux using initial port area of solid fuel, in stead of regression rate correlation which shows combustion characteristic in hybrid propulsion. The burning rate could be easily obtained by using the oxidizer mass flux of initial port area without iteration, and fuel configuration could be designed simply. In this experiments PE was used as fuel, COX was used as oxidizer. A variation of mass flux of solid fuel with port area is considered by changing the burning time. In the case of approximate 0.5 for an exponent of oxidizer mass flux, using the fuel mass flux correlation is more suitable than regression rate correlation in hybrid propulsion.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.259-264
• /
• 2009

Most of the fossil power plants firing lower grade coals are challenged with maintaining good combustion conditions while maximizing generation and minimizing emissions. In many cases significant derate, availability losses and increase in unburned carbon levels can be attributed to poor combustion conditions as a result of poorly controlled local fuel and air distribution within the boiler furnace. The poor combustion conditions are directly related to the gas flow deviation in upper furnace and convection tube-bank but a less reported issue related to in large-scale oppose wall fired boilers. In order to develop a on-line combustion monitoring system and suggest an alternative heat flux estimation method at tube bank, which is very useful information for boiler design tool and blower optimizing system, field test was conducted at operating power boiler. During the field test the exhaust gases' temperature and tube metal temperature were monitored by using a spatially distributed sensors grid which located in the boiler's high temperature vestibule region. At these locations. the flue gas flow is still significantly stratified, and air in-leakage is minimal which enables tracing of poor combustion zones to specific burners and over-fire air ports. Test results showed that the flue gas monitoring method is more proper than metal temperature distribution monitoring for real time combustion monitoring because tube metal temp. distribution monitoring method is related to so many variables such as flue gas, internal flow unbalance, spray etc., Heat flux estimation at the tube bank with flue gas temp. and metal temp. data can be alternative method when tube drilling type sensor can't able to use.

• Plant Journal
• /
• v.18 no.1
• /
• pp.55-61
• /
• 2022

In this study, I analyzed the effect of slagging caused by blending bituminous coal and subbituminous coal while maintaining the generator output, combustion conditions, and ventilation conditions for 870MW thermal power plant designed with bituminous coal. Accordingly I proposed an acceptable method of blending coal method. the blending ratio of sub-bituminous coal was adjusted to 10%, 20%, 40%, 60%, 80%, etc. to confirm ultimate analysis, proximate analysis, ash fusion temperature change, slagging indices, etc. Proper blending coal conditions are blending with sub-bituminous coal at 40% or less, ratio of base component to acid component(B/A) is 0.4 or less or 1 or more, total alkali(TA) is 3.5 or less, fusion slagging index(Rfs) is 1,345℃ or more, and ash content is 13% or less in ultimate analysis, the ash content in proximate analysis is 15% or less, and the initial deformation temperature(IDT) should be at least 1,200℃ or more

• Plant Journal
• /
• v.12 no.1
• /
• pp.24-28
• /
• 2016

In desulfurization facilities of oil-fired power plant, gypsum scale is attached in the absorber inner surface as the operating time increases. For this reason, the maximum possible load of the power generation is set down, resulting in further generation stop. Cleaning of absorber for scale removal can be determined at the time of setting down of the maximum possible load. In this study, 6 weeks before the maximum possible load of the power generation was down set, at the same time and desulfurization facilities outlet $SO_2$ concentration value was more than 130ppm, absorber differential pressure exceeded $380mmH_2O$, it was confirmed to be the time that has elapsed 44 weeks after the previous absorber cleaning. Cleaning time of the absorber was predicted to be a time which has elapsed 50 weeks from the previous cleaning time.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.223-231
• /
• 1997

내열성복합재료와 Steel 구조물 사이의 좁고 긴 원통형 공간을 내열성 폴리우레탄 재료로 충전하는 연구를 수행하였다. 충전재료를 결정하기 위하여 3종의 폴리우레탄과 에폭시수지를 선정, 시험하여 내열성, 흐름성, 접착성, 경도측정 등을 통하여 최종 결정하였으며 선정된 폴리우레탄을 충전하기 위하여 Resin Transfer Molding(RTM) 방법을 사용하였다. 충전 공정의 적용여부를 판단하기 위하여 아크릴을 이용한 RTM치구를 설계, 제작하여 시험하였다. 충전된 조립체는 비파괴 검사를 통하여 접착, 기공 등을 검사하였으며 지상연소시험을 통하여 내열성능을 평가하였다.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.150-158
• /
• 1999

본 연구는 저온플라즈마를 이용하여 배기가스중의 SOx와 NOx를 동시에 처리하는 공정을 개발하는 것으로서, 최적의 반응제 선정과 효율적인 공정의 구성을 위해 SOx, NOx와 반응제와 반응기구를 밝히고자 하였다. 실험은 1.0 N㎥/h의 모사가스를 이용한 기초실험과 20 N㎥/h의 실제 연소가스를 이용한 실험으로 진행되었으며, 반응제로는 NH3와 파리핀계 및 올레핀계 탄화수소를 사용하였다. NH3를 반응제로 한 SO2 제거반응은 비플라즈마 조건에서는 NH4HSO3, 플라즈마 조건에서는 (NH4)2SO4의 생성반응이었고, 두 조건 모두 높은 제거율을 나타냈다. 반응제를 사용하지 않은 플라즈마 조건에서 SO2는 환원반응이 일어나고 O2 농도의 증가는 역반응을 증가시키는 화학평형에 의해 SO2의 제거율이 감소되었다. 플라즈마 조건에서 NO는 O2농도가 낮은 경우는 NO의 환원반응이 주로 일어나고, O2 농도가 높을 경우는 산화반응이 지배적이었다. 올레핀계 탄화수소는 플라즈마 조건에서 NO 산화 반응에 탁월한 효과를 보였을 뿐만 아니라 SO2 제거에도 효과를 보여 최대 40%의 제거율을 나타냈으며, NH3의 사용을 줄일 수 있음을 확인하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.170-175
• /
• 1996

경수로용 원전연료의 고연소에 따른 핵분열 가스 증가에 대비하여 플레넘 부피를 최대한으로 확보하기 위하여 연료봉 압축스프링의 부피를 최소화하는 설계 최적화에 대한 연구를 수행하였다. 연료봉 설계변경이나 제조공정에 따른 요구사항을 용이하게 반영할 수 있도록, 최적설계 Software Package인 IDESIGN을 이용하여 최적설계 프로그램을 작성하였으며, 구해진 설계변수값 부근에서 다시 반복 계산을 수행하여 설계변수들의 자릿수를 조정할 수 있게 하였다. 한편, 스프링의 좌굴특성을 향상시키기 위하여 연료봉으로부터 돌출된 스프링의 피치는 작게 하고 연료봉 플레넘 길이내의 피치는 더욱 크게 하는 부등피치 압축스프링은 균일피치의 경우와 거의 동일한 방법으로 설계되며, 각 구역의 설계값은, 스프링 제조설비를 고려하여 실험적으로 결정될 상수를 포함한, 9개의 미지수에 대한 9개의 연립방정식의 해를 구하여 결정된다.