• 제목/요약/키워드: 연소음

검색결과 41건 처리시간 0.027초

비예혼합 제트화염에서 고주파수의 노즐 구멍음에 의한 부상화염 혼합성능에 관한 연구 (A Study on the Mixing Capacity of Lifted Flame by the Nozzle Hole-tone of High Frequency in Non-premixed Jet Flames)

  • 조준익;이기만
    • 한국가시화정보학회지
    • /
    • 제9권4호
    • /
    • pp.35-40
    • /
    • 2011
  • An experimental investigation of the characteristic of non-premixed lifted flames with nozzle hole-tone of high-frequency has been performed. Before the fuel was supplied to nozzle, the fuel was supplied through a burner cavity which was located under the nozzle. The fuel passed through the excitation cavity under the influence of the high-frequency affects the lifted flame characteristics. The measurements were performed in flow range that occurs lifted flame and blow out. When the high-frequency is generated from burner cavity, the lifted length became shorter, and noise reduced comparing to unexcitation case. Additionally, operating flow range was increased and diameter of flame base became smaller with high-frequency effect. Through this experiments, it's ascertained that the high-frequency excitation can be adopted with effective method for flame stability and noise reduction.

성층희박연소 운전조건에서 분사압과 분사시기에 따른 분무유도식 직접분사 가솔린엔진의 연소특성 (Effect of Injection Pressure and Injection Timing on Combustion Characteristics of Spray-Guided Direct-Injection Spark-Ignition Engine under Lean Stratified Combustion Operation)

  • 오희창;이민석;박정서;배충식
    • 대한기계학회논문집B
    • /
    • 제35권10호
    • /
    • pp.981-987
    • /
    • 2011
  • 단기통 직접분사 가솔린엔진의 성층연소 조건에서 연소실험을 수행하였다. 각 분사압조건마다 실화가 발생하지 않는 성층연소가능 분사시기영역이 존재하였으며 이는 혼합기 형성과정의 분위기압에 따른 영향으로 판단하였다. 연소효율은 분사시기를 지각할수록 증가하며 32~28 CAD BTDC에서 최대값을 갖고 이후 감소하는 경향을 보였고 분사압이 높을수록 높은 연소효율이 나타났다. 이러한 연소효율의 경향은 IMEP와 다른 경향을 보였으며 그 이유는 높은 연소효율 조건에서 연소상이 진각되어 음의 일이 증가하였기 때문으로 판단된다. Smoke의 배출은 분사시기가 지각됨에 따라 증가하였으며 높은 분위기 압에서 국부적으로 농후한 영역이 증가하였기 때문으로 생각된다. NOx 배출도 분사시기를 지각함에 따라 감소하였으며 연소상의 지각으로 최대 연소실압력과 온도가 감소하였기 때문으로 생각된다.

거대억새의 저속 열분해 생성물 특성 분석 (Properties of Products from Slow Pyrolysis of Geodae-Uksae 1)

  • 이용운;음푸른별;정진호;현승훈;박영권;류창국
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.235-237
    • /
    • 2012
  • Geodae-Uksae 1 is a variety of Miscanthus sacchariflorus recently discovered in Korea. It is being mass-cultivated for use as energy crop due to its superior productivity, as high as 30 ton/ha/yr for the dry mass. This study investigates the method of producing biochar and bio-oil from the crop using slow pyrolysis. Especially, the study focused on assessing the biochar properties for its application to soil to improve soil quality and sequestrate carbon. Using an electrically heated packed bed reactor, the products of slow pyrolysis from Geodae-Uksae 1 were produced over a temperature range of $300-700^{\circ}C$ with a heating rate of $10^{\circ}C/min$. The biochar, condensable vapor (bio-oil) and residual gases were characterized for the physical and chemical properties. It was concluded that the ideal temperature for pyrolysis to produce biochar is $500^{\circ}C$.

  • PDF

모형 가스터빈 연소기내 연소불안정성에 대한 실험적 연구 (An Experimental Study on Combustion Instability Mechanism in a Dump Gas Turbine Combustor)

  • 이연주;이종호;전충환;장영준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.853-858
    • /
    • 2001
  • The knowledge of flame structure is essential for control of combustion instability phenomena. Some results of an experimental study on mechanism of naturally occurring combustion oscillations with a single dominant frequency are presented. Tests were conducted in a laboratory-scale dump combustor at atmospheric pressure. Sound level meter was used to track the pressure wave inside the combustor. The observed instability was a longitudinal mode with a frequency of $\sim341.8Hz$. Instability map was obtained at the condition of inlet temperature of $360^{\circ}C$, mean velocities of $8.5\sim10.8m/s$ and well premixed mixture. It showed that combustion instability was susceptible to occur in the lean conditions. In this study, unstable flame was observed from stoichiometric to 0.7 in overall equivalence ratio. At selected unstable conditions, phase-resolved OH chemiluminescence images were captured to investigate flame structure with various mean velocities. As mean velocity is increased, the flame grows and global heat release was changed. Due to these effects, combustion instability can be maintained at more lean air-fuel ratio. Also, these results give an insight to the controlling mechanism for an increasing heat release at maximum pressure.

  • PDF

동아시아의 생체연소 배출물에 대한 한국의 미세먼지 기여도 및 복사 에너지 수지 분석 (Analysis of the Contribution of Biomass Burning Emissions in East Asia to the PM10 and Radiation Energy Budget in Korea)

  • 이지희;조재희;김학성
    • 한국지구과학회지
    • /
    • 제43권2호
    • /
    • pp.265-282
    • /
    • 2022
  • 본 연구에서는 중국 북동지역에서 발생하는 산불에 의한 생체연소 배출물이 장거리 수송으로 한국의 미세먼지 질량농도에 미치는 영향을 WRF-Chem 모델을 활용하여 분석하였다. 2020년 4월 4-7일에 한국은 중국 북동지역의 생체연소 배출물과 더불어 중국 동부지역의 인위적 배출과 중국 북부와 몽골에서 발생한 황사의 영향을 함께 받고 있었다. 인위적 배출과 황사가 혼재된 대기오염 상황에서 zero-out 방법을 활용하여 생체연소 배출물을 분류하고 미세먼지 장거리 수송 기여도를 분석하였다. 또한, 광역적인 생체연소 배출물의 분포에 따라 한반도 주변의 육지와 해양에 대한 복사 에너지 수지를 분석하였다. 2020년 4월 5-6일에는 한국의 하루평균 미세먼지 질량농도에 대한 생체연소 배출물의 장거리 수송 기여도가 60%로 산출되었다. 더불어 한반도 주변에 광역적으로 분포하는 생체연소 배출물의 영향으로 육지와 해양의 순 복사 플럭스는 음의 값을 나타내었다. 그러나 2020년 4월 7-8일에는 중국 동부지역에서 발생한 인위적 오염물질이 생체연소 배출물에 더해지면서 한국의 미세먼지 질량농도는 4월 5-6일보다 증가하였으나 생체연소 배출물의 기여도는 45% 이하로 감소하였다. 또한, 생체연소 배출물의 영향이 줄어들면서 순 복사 플럭스는 양의 값을 나타내었다.

중수감속 가압경수로의 핵설계 타당성

  • 김명현;윤진규
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1996년도 춘계학술발표회 초록집
    • /
    • pp.100-104
    • /
    • 1996
  • 신형경수로의 설계 대안으로서 기존 가압경수로와 가압중수로의 단점들을 극복하고, 장점들을 채택한 새로운 중수감속 경수로의 노심 설계를 제안하였다. 기존 가압중수로의 압력관내에 경수를 냉각제로 순환시키며 중수를 감속재로서 압력관 외부에 배치하였으며, 핵연료로서 농축우라늄을 사용하는 설계 개념은 많은 설계 장점을 갖는다. 본 연구에서는 시스템은 기존 CANDU의 설계를 입증기술로서 가능한 그대로 채택하고, 핵연료와 냉각재에 대해 핵설계를 수행하여 핵적 타당성을 검토하였다. 핵연료다발은 월성 2호기 사양을 그대로 사용하여 37봉 핵연료 다발로 하였으며, 농축도, 봉간간격, 핵연료다발간 간격들을 변형시켜 높은 연소도를 확보하면서 냉각재 온도계수와 감속재 온도계수가 음의 안전성을 갖는 원자로가 설계될 수 있음을 확인하였다.

  • PDF

난류 제트확산화염의 연소소음 특성에 관한 실험연구 (Experimental Study on Combustion Noise Characteristics in Turbulent Jet Diffusion Flames)

  • 김호석;오상헌
    • 대한기계학회논문집
    • /
    • 제18권5호
    • /
    • pp.1253-1263
    • /
    • 1994
  • The experimental study is carried out to identify the combustion generated noise mechanism in free turbulent jet diffusion flames. Axial mean fluctuating velocities in cold and reacting flow fields were measured using hot-wire anemometer and LDv.The overall sound pressure level and their spectral distribution in far field with and without combustion were also measured in an anechoic chamber. The axial mean velocity is 10-25% faster and turbulent intensities are about 10 to 15% smaller near active reacting zone than those in nonreacting flow fields. And sound pressure level is about 10-20% higher in reacting flow fields. It is also shown that the spectra of the combustion noise has lower frequency characteristics over a broadband spectrum. These results indicate that the combustion noise characteristics in jet diffusion flames are dominated by energy containing large scale eddies and the combusting flow field itself. Scaling laws correlating the gas velocity and heat of combustion show that the acoustic power of the combustion noise is linearly proportional to the 3.8th power of the mean axial velocity rather than 8th power in nonreacting flow fields, and the SPL increases linearly with logarithmic 1/2th power of the heat of combustion.

규칙적인 진동 하에서 노즐 부착된 제트화염의 연소특성 (A Combustion Characteristics of Attached Jet Flame under the Regular Oscillation)

  • 김대원;이기만
    • 한국화재소방학회논문지
    • /
    • 제23권1호
    • /
    • pp.55-62
    • /
    • 2009
  • 층류영역의 분출유량에서 큰 가진강도 효과를 얻기 위해 연료관 관 공명주파수로 가진된 비예혼합 분류 화염의 일반적인 가진 연소특성을 실험적으로 조사하였다. 화염 안정화 특성에서는 두 가지 형태의 부상 특성이 존재하는 사실을 알았는데, 화염이 부상되는 가진강도 크기에서 한 쪽은 감소, 다른 영역에서는 증가하는 것으로 나타나 각각 서로 다른 부상기구가 존재함을 확인할 수 있었다. 특히 부상되지 않고 노즐에 부착된 분출유량 영역에서의 가진 연소특성을 가진 강도에 따른 화염 길이와 형상, 유동장 응답 특성 그리고 노즐 출구에서의 유속 분포를 중심으로 집중 조사하였다. 특이한 현상으로는 가진 강도 증가에 따라 화염의 신장과 in-burning 현상 그리고 화염 내 거동 와동들의 말림방향이 서로 역전되는 현상 등이 발견되었다. 노즐 출구의 유속분포와 가시화 기법을 통해 이러한 현상들이 노즐관 관벽 안쪽서부터 음의 속도가 발생하기 시작함에 따라 주변 산화제인 공기가 노즐관 안으로 유입되는 현상과 관련되는 것으로 파악되었다.

접촉요소(Contact Element)를 적용한 나사체결부(Thread joint)의 구조해석

  • 구송회;이방업;조원만;이환규
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 1996년도 제7회 학술강연회논문집
    • /
    • pp.15-24
    • /
    • 1996
  • 로켓모타의 연소관은 구조적인 편의성 및 경량화를 위하여 도옴-실린더부와 실린더-노즐부에 나사체결방법을 많이 적용하고 있는데, 나사의 골부위에 집중응력이 발생하여 인장강도를 넘는 응력이 발생하는 경우가 있다. 본 연구에서는 나사의 골부위의 응력수준을 좀 더 정확히 예측하기 위하여 나사체결시 작용하는 조립 토오크에 의한 초기하중을 고려한 구조해석을 수행하였으며, 나사부위에 발생하는 응력이 항복강도를 초과하므로 정확한 해석을 위하여 탄소성해석을 수행하였다. 조립 토오크에 의한 초기하중은 나사체결 멈춤부에 음(-)의 접촉 간극을 부여하여 모델링하였으며, 조립 토오크의 크기는 나사체결 근접부에서 변형률을 측정하여 모사하였다. 해석결과 초기하중을 고려하여 구조해석을 수행하면 최대예상 작동압력에서 초기하중의 영향은 거의 나타나지 않았으며, 마찰계수를 감소시키면 최대응력이 감소하여 구조적 안전성이 증가할 것으로 판단된다.

  • PDF

제주도 고산지역과 한라산 1100고지 대기 에어로졸의 특성 비교 (Comparison of Characteristics for Atmospheric Aerosols between Gosan Site and 1100 Site in Mt. Halla, Jeiu Isalnd)

  • 고희철;강창희;고선영;고수연;김용표;한진석
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2003년도 추계학술대회 논문집
    • /
    • pp.374-375
    • /
    • 2003
  • 산업화에 따른 화석 연료의 연소, 기타 오염원에 의하여 생성되는 대류권의 에어로졸은 전 지구적인 평균값으로 볼 때, 약 -0.5 W/$m^2$의 복사강제력(radiative forcing)을 갖는 것으로 보고되고 있다. 이러한 음의 복사강제력은 일산화탄소, 염화불화탄소, 메탄 등과 같은 온실기체에 의한 양의 복사강제력을 상쇄시키는 정도보다 더 클 수 있다고 추측되고 있어 지속적으로 관리가 필요한 것으로 보인다. 본 연구는 국내에서 청정지역으로 꼽히고 있는 제주도 고산 측정소와 한라산 1100 고지 지역에서 에어로졸 시료를 채취하고, 고도에 따라 에어로졸 조성이 어느 정도 차이를 보이는지, 그리고 고도에 따라 에어로졸 성분의 특성이 어떻게 다른지를 비교하기 위한 목적으로 수행되었다. (중략)

  • PDF