• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.699-705
• /
• 2011

High-maneuver missile is a projectile which demands a strong momentum at short time. To produce a necessary thrust for the flight, the gas of high temperature and pressure is generated through explosive combustion of solid propellant, and a great thrust can be obtained by expanding this high temperature and pressure gas. Although the operating time of a rocket motor is less than a few seconds, a failure of part or ablation near the throat of nozzle may take place during the expansion of high temperature and pressure gas for great thrust. In other words, for the precise control of a missile an exact stress analysis considering both, the thermal stress caused by the heat transfer between combustion gas and wall, and the mechanical stress caused by the pressure change in the flow, should be considered first. In this connection, this study investigated the safety, as a point of view of stress and melting point of the material, of the pre-designed thrust generating structure which is subjected to high temperature and pressure as a function of motor operating time.

• Fire Science and Engineering
• /
• v.15 no.3
• /
• pp.7-13
• /
• 2001

In this paper, we had analyzed comsbustion gases according to pyrolysis $600^{\circ}c$, $800^{\circ}c$ and $1000^{\circ}c$ for polymeric material using a GASTEC colorimetric gas detector tube in order to combustion gases toxicity evaluation for flame retardant untreated ply wood, flame retardant treated ply wood, flexible polyvinyl chloride and flexible polyurethane foam of polymeric material. As a result, comsbustion gases producted from small specimens of polymeric material had reached fatal to man at a 30 minute exposure time that had possesed toxicity index. Toxicity index at pyrolysis $800^{\circ}c$ of flexible polyvinyl chloride was 31.74. Flexible polyvinyl chloride was the highest toxicity index of flame retardant untreated ply wood, flame retardant treated ply wood, flexible polyvinyl chloride and flexible polyurethane foam. The comsbustion gases producted commonly no concern with pyrolysis temperature had analyzed carbon dioxide($CO_2$) and carbon monoxide(CO). Toxicity index had investigated differently according to pyrolysis temperature even a similar materal.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.107-113
• /
• 2005

A calorimeter of 2-ton thrust level rocket engine chamber has been developed to measure the wall heat flux. The liner of the chamber is made of copper-chromium alloy to maximize the heat transfer performance and structural strength. 1-D design code based on empirical correlations has been used for the prediction of the global thermal characteristics while 3-D CFD has been applied for the verification of local cooling performance. The predicted average wall heat flux at the throat is 43 $MW/m^{2}$ for the combustion chamber pressure of 53 bar. The chamber structure is confirmed to be safe at the pressure of 150 bar through 2-D stress analysis and measurement of the strain of the test species. Finally, the test of pressurizing the calorimeter chamber has been performed with water at the pressure of 150 bar in room temperature environment. No thermal damage has been detected after the hot-fire test in the test nozzle of same cooling performance with the developed calorimeter though the measured throat heat flux is higher than the design value by 10%.

• 한국가스학회:학술대회논문집
• /
• 2004.11a
• /
• pp.97-102
• /
• 2004

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2005.10a
• /
• pp.95-100
• /
• 2005

• Fire Science and Engineering
• /
• v.22 no.3
• /
• pp.258-264
• /
• 2008

This study proposes the experimental methods which shows various guidelines for systematic study of surface forest fuels. The thermal characteristics of surface fire fuels such as Quercus Variabilis and Pinus Densiflora fallen leaves are measured using TGA and Oxygen Bomb Calorimeter. Both of them are common species of Korean forest. Also the combustion characteristics of surface fire fuels are analysed according to the methods which are commonly used in Pool Fire analysis. The measured parameters are gas velocity, temperature, flame height, heat release rate and mass loss rate. A system is designed to simulate the surface fire. Methods and results are shown for the application of forest fire study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.32-36
• /
• 2016

Test equipment was designed and manufactured to evaluate thermal reaction characteristic of internal insulators of solid rocket motor. Test is allowed up to chamber pressure 2,500 psi, burn-time 100 s. A cross section of test sample part is quadrature, and various test samples can be comparable at the same time. Inner temperature of test sample can be measured by thermocouples during burning. Test was executed in condition of efficient average chamber pressure 1,000 psi, efficient burn-time 10 s and safety of equipment was confirmed. Basic data for understanding thermal characteristics of internal insulator, that is, pressure-time curve, temperature-time curve in the test sample, and thermal destruction thickness of test sample was gained successfully.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.63-63
• /
• 2011

화재란 사람의 의도에 반하거나 고의에 의해 발생하는 연소현상으로서 소화시설 등을 사용하여 소화할 필요가 있는 것을 말한다. 사람의 의도에 반한다고 하는 것은 과실에 의한 화재를 의미하며 화기취급 중 발생하는 실화뿐만 아니라 부작위에 의한 자연발화도 포함하며, 고의에 의한다고 하는 것은 일정한 대상에 대하여 피해발생을 목적으로 화재발생을 유도하였거나 직접 방화한 경우를 말한다. 연소현상이라 함은 가연성 물질이 산소와 결합하여 열과 빛을 내며 급속히 산화되어 형질이 변경되는 화학반응을 말한다. 소화시설 등을 사용하여 소화할 필요가 있다는 것은 화재란 연소현상으로서 소화의 필요성이 있어야 하며 소화의 필요성의 정도는 소화시설이나 그와 유사한 정도의 시설을 사용할 수준 이상이어야 한다. 화재원인조사란 발화부를 판단하고 화재에 이르게 된 발화원을 규명하며, 발화부로부터 연소확대된 경과를 조사하는 일련의 행위로서 화재원인조사시 가장 중요한 사항은 발화부 판단인 바, 이는 화재원인이 발화부에만 존재하기 때문이다. 최근에는 다양한 소재의 사용으로 인해 일단 화재로 진행될 경우 인명 및 재산상 피해가 증가하게 되어 있으며, 이로 인해 화재조사시 화학, 물리, 전기, 건축, 기계, 소방 등 다양한 지식과 화재현장에 대한 이해가 요구된다. 화재현장 조사시 발화부 판단의 과학적 접근은 매우 중요한 것으로서, 화재원인의 명쾌한 규명으로 책임한계 구분은 물론, 유사사고의 재발방지를 위한 연구가 필요하다. 본 연구에서는 기 발생한 화재사례에서 얻은 화재패턴을 분석하여 얻은 자료를 통해 발화부를 판단할 수 있는 조사방법을 다음과 같이 제시하였다. 1) 화재시 열전달과 화염확산 과정에서 건축구조물, 내장재, 집적물 및 각종 설치물의 구조, 재질 등에 따라 다양한 화재패턴을 형성하게 됨을 알 수 있다. 2) 화재패턴의 종류로는 화재플럼에 의한 삼각형, 주상, V, U 패턴 등이 있으며, 연소 생성물인 화염, 연기, 열 등에 의해 다양한 형태를 보임을 알 수 있다. 3) 위와 같은 결과를 종합하여 연소의 상승성, 불꽃 및 연기 흔적, 열에 의한 흔적 등에 의해 연소의 방향성을 알 수 있다. 4) 결국 화재현장에서 명확한 화재원인을 규명하기 위해서는 화재패턴에 의해 연소확대과정을 역으로 추적하여 발화부를 결정한 다음, 발화부내에서 화재원인을 찾아내야 할 것이다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.1
• /
• pp.21-29
• /
• 2002

Hybrid propulsion systems provide many advantages in terms of stable operation and safety. However, classical hybrid rocket motors have lower fuel regression rate and combustion efficiency compared to solid propellant rocket motor. The recent research efforts are focused on the improvement of volume limitation and regression rate in the hybrid rocket engine. The present study has numerically investigated the combustion processes in the hybrid rocket engine. The turbulent combustion is represented by the eddy breakup model and Hiroyasu and Nagle and Strickland-Constable model are used for soot formation and soot oxidation. Radiative heat transfer is modeled by finite volume method. To reduce the uncertainties for convective heat transfer near solid fuel surface having strong blowing effect, the Low Reynolds number $\kappa-\varepsilon$ turbulent model is employed. Based on numerical results, the detailed discussion has been made for the turbulent combustion processes in the vortex hybrid rocket engine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.20-29
• /
• 2013

Turbulent flow and combustion characteristics in a micro can combustor with a baffle plate are investigated by a Reynolds Stress Model. In order to examine the geometric effects on the turbulent combusting flow, several baffle configurations are selected. The interrelation between the flow structure and the thermal field are investigated by examing the variation of recirculation region, flame length and heat loss. For the flow mixing, the decreasing air hole is more efficient than the decrease of the fuel hole. As the fuel or air hole diameter decreases, combustion efficiency is enhanced and flame length is decreased. Additionally, as the diameter of air hole decreases, the heat loss and combustion temperature are increased, while they are reduced with decreasing the diameter of fuel hole.