• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.61-64
• /
• 2009

A study on the variation of combustion performance by oxidizer/fuel ratio was conducted. Shower head type injector was used. Injector propelled by liquid kerosene and liquid hydrogen peroxide. The designed operation condition for thrust and combustion pressure were 200N and 10bar. It is found that optimum oxidizer/fuel ratio.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.6-6
• /
• 1999

국가우주개발의 중장기 계획에 따른 우주 발사체 개발의 일환으로, 한반도 대기상태측정 등을 위한 고성능 과학관측로켓의 국산화를 위하여 항공우주연구소를 중심으로 여러 기관에서 연구가 진행되고 있다. 액체로켓을 주 추진체으로 삼고 있기 때문에 로켓의 안정적인 연소와 성능 향상이야말로 발사체 개발에 핵심이라고 할 수 있다. 액체로켓의 경우, 초기점화는 고체시동장치 또는 액체시동장치에 의한 방법 등으로 구분될 수 있다. 본 연구는 액체시동장치 중 hypergolic으로 초기점화를 하고 뒤이어 주추진제(LOX/kerosene)를 내보내어 주연소를 할 수 있는 Unlike impinging Quadlet injector(3 on 1)의 연소성능 이해와 예측을 위해 Cold flow test를 기초로 수행되었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.83-89
• /
• 2011

A design plan was proposed for determining combustor configuration of regenerative- cooled liquid rocket engine in the process of preliminary design. Rocket performance and regenerative cooling results were calculated using the properties of combustion gas estimated in CEA. For required thrust, chamber pressure, atmosphere pressure and propellant mixture ratio the mass flow rate of propellants and combustor performance were predicted by one-dimensional and experimental correlations. Finally, determinable plan for the contour of combustor were presented through Rao nozzle design method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.37-42
• /
• 2010

A design plan was proposed for determining combustor configuration of regenerative- cooled liquid rocket engine in the process of preliminary design. Rocket performance and regenerative cooling results were calculated using the properties of combustion gas estimated in CEA. For required thrust, chamber pressure, atmosphere pressure and propellant mixture ratio the mass flow rate of propellants and combustor performance were predicted using one-dimensional and experimental equations. Finally, determinable plan for contour of combustor were presented through Rao nozzle design method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.271-274
• /
• 2006

In order to predict the performance of the small-scale Polyethylene-GOX hybrid rocket motor, a typical internal ballistic model was proposed. The model adopted for the present study employed the lumped scale of chamber pressure so that the pressure-time history resulted from the present model was comparable to the test results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.108-111
• /
• 2017

High performance upper stage engine is necessary for space launch vehicles of geostationary orbit, and staged combustion cycle engine is suitable due to high specific impulse. Technology demonstration model for 9 tonf class staged combustion cycle engine, which is consisted of turbopump, preburner, combustion chamber and supply system, was assembled, and hot-firing test was conducted for three seconds in Upper-stage Engine Test Facility of Naro Space Center. Ignition, combustion and shut down of engine system was performed normally, and its performance parameters were evaluated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.259-264
• /
• 2004

The critical component of combustor having high combustion efficiency for high performance liquid rocket engine is injector. The results of design and hot firing tests of six sub-scale combustors which have respectively an impinging type injector(1ea.), an bi-propellant swirl closed injector(1ea.), and hi-propellant swirl mixed injector(4ea.) were described in this paper. The combustion test were successfully performed. The combustion efficiency have higher value than predicted value and high frequency combustion instability does not occur.

• Journal of the KSME
• /
• v.56 no.9
• /
• pp.32-37
• /
• 2016

초임계 유체의 고유한 물리적 특성변화와 난류유동을 결합하여 성능을 높이는 데 활용하고 있는 가장 대표적인 시스템 중의 하나는 연소기이다. 이때 연료와 산화제의 연소반응은 저압조건과 다른 고유한 특성을 가지고 있어 기존의 연소모델에 의해서는 정확한 분석이 어렵게 된다. 따라서 초임계 압력조건에 대한 연소과정을 분석할 수 있는 연소모델이 필요하고 이러한 연소과정이 난류유동조건에서 발생하기 때문에 최근 많은 연구가 초임계 난류연소모델 개발에 집중되어 왔다. 이 글에서는 특히 액체로켓엔진 관련 초임계 연소모델 개발 분야의 연구동향을 살펴보고자 한다.

• 전기의세계
• /
• v.31 no.3
• /
• pp.187-190
• /
• 1982

발전효율은 증기발생용 수질 보일러의 구조 및 재질 등 여러가지가 있겠으나 그중 연료의 연소효율이 가장 중요하여 이것과 관련한 성상 및 연료현상에 대하여 기술하고 또한 국내에서는 이를 성능시험에 대한 제도적 장치 및 기법이 확립되어 있지 않아 성능 기준의 판정이 곤란한 실정이므로 측정 방법도 간단히 부연하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.75-82
• /
• 2021

Low-temperature combustion (LTC) strategies, such as HCCI (Homogeneous Charge Compression Ignition), PCCI (Premixed Charge Compression Ignition), and RCCI (Reactivity Controlled Compression Ignition), have been developed to effectively reduce NOx and PM while increasing the thermal efficiency of diesel engines. Through numerical analysis, this study examined the effects of the injection timing and two-stage injection ratio of diesel fuel, a highly reactive fuel, on the performance and exhaust gas of RCCI engines using gasoline as the low reactive fuel and diesel as the highly reactive fuel. In the case of two-stage injection, combustion slows down if the first injection timing is too advanced. The combustion temperature decreases, resulting in lower combustion performance and an increase in HC and CO. The injection timing of approximately -60°ATDC is considered the optimal injection timing considering the combustion performance, exhaust gas, and maximum pressure rise rate. When the second injection timing was changed during the two-stage injection, considering the combustion performance, exhaust gas, and the maximum pressure increase rate, it was judged to be optimal around -30°ATDC. In the case of two-stage injection, the optimal result was obtained when the first injection amount was set to approximately 60%. Finally, a two-stage injection rather than a single injection was considered more effective on the combustion performance and exhaust gas.