• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.326-330
• /
• 2011

Development and validation of performance analysis model for dual combustion ramjet engines has been performed. A typical performance model for hypersonic intake flow and supersonic mixing and combustion was demonstrated; Taylor-Maccoll equation for coaxial intakes and a quasi-one dimensional reacting flow analysis with CEA chemical equilibrium for supersonic combustion. The results, thermodynamic data of intake and supersonic combustor were validated with CFD numerical results.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.48-54
• /
• 2019

A Large Eddy Simulation (LES), adopting the Eddy Dissipation Concept (EDC) 1-step model, was successfully performed for backdraft phenomena. The activation energy of the finite chemistry reaction in the EDC 1-step model was adjusted to simulate the backdraft. The prediction of the EDC 1-step model was similar to that of the Mixing-Controlled Fast Chemistry (MCFC) model, except when the backdraft occurred. The EDC 1-step model could be used to simulate the experimental peak pressure, but not the first peak pressure of the backdraft.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.98-104
• /
• 1996

핵분열 생성물 방출량을 계산하는 모델들에 대한 비교 분석을 위해 GAPCON-THERMAL-2 Revision 2 (GT2R2) 코드를 이용하여 Beyer-Hann , Beyer-Hann with NRC High Burnup Correction, ANS5.4와 Modified ANS5.4 핵분열 생성물 방출 모델들을, RISO-M2-2C 핵연료봉의 실험결과와 비교하였다. Beyer-Hann 모델은 실험결과보다 낮게 예측한반면 ANS5.4 모델은 실험결과 보다 높게 예측하였다. 한편 NRC High Burnup Correction을 한 Beyer-Hann 모텔과Modified ANS5.4 모델은 실험 결과와 비슷한 방출비를 예측하였다. 이러한 결과를 확인하기 위해 국부적인 핵연료 온도와 연소도를 검토한 결과 ANS5.4 모델이 .Modified ANS5.4 모델보다 온도와 연소도에 따라 더 민감한 반응을 보이고 있으며, Beyer-Hann 모텔은 연소도 영향이 없이 각 온도 영역에서 일정하였고, Beyer-Hann with NRC High Burnup Correction 모델은 20,000MWd/MTU 연소도 이상영역에서 연소도 영향을 보이고 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.401-405
• /
• 2010

An efficient performance model for scramjet engines has been proposed for scramjet performance design. In supersonic air intake design, the compression angles of the wedge were determined to maximize the total pressure recovery of the intake based on Oswatisch criterion. Both combustion models of chemical equilibrium and finite-rate chemistry model are implemented, and compared each model with the results by Starkey for Waverider engine configuration. Finally, the performance model of concern has been confirmed by conducting performance analysis with hypothetical mission profile and design conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.304-309
• /
• 2017

This paper studies a nonpremixed turbulent flame in a model scramjet combustor using zonal hybrid RANS/LES method. The numerical domain is divided into two region, RANS and LES region. The interface between the two regions is treated with synthetic eddy method. A model scramjet combustor experimented at German aerospace center is selected for the comparative study. The fuel injection of cracked kerosene surrogate which is composed of ethylene and methane is considered. Turbulent combustion of cracked kerosene surrogate is achieved using flamelet approach.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.3
• /
• pp.9-14
• /
• 2013

Combustion tests were conducted for a hydrogen-fueled Mach 5 scramjet engine model using a blow-down facility. No fuel and two fuel flow rate cases were tested for two different model configurations. Time history of the wall static pressures inside the model and their time-averaged spatial distribution were used for the analysis of the flow and combustion characteristics. For shorter model, supersonic combustion was occurred for both of the fuel flow rate cases. For longer model, supersonic combustion was occurred for less fuel case, whereas thermal choking and subsonic combustion were occurred for more fuel case. Intake started even for this subsonic combustion case.

• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.75-80
• /
• 2014

The past several years have seen a substantial growth in mathematical modeling activities whose interests are to describe the performance, efficiency and emissions characteristics of various types of internal combustion engines. The key element in these simulations of various aspects of engine operation is the model of the engine combustion process. Combustion models are then classified into three categories: zero-dimensional, quasi-dimensional and multidimensional models. zero-dimensional models are built around the first law of thermodynamics, and time is the only independent variable. This paper presents a introduction to the combustion characteristics of a spark ignition combustion modeling by zero-dimensional model.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.253-256
• /
• 2006

A numerical study for spray flow of fuel and oxidizer droplets in the combustion chamber has been conducted prior to the analysis of spray combustion of the liquid rocket engine. As the spray combustion model, DSF model and Euler-Lagrange scheme have been used. While the coupling effects of the droplets between gas phase and evaporated vapor have been calculated using PSIC model, SIMPLER algorithm and QUICK scheme have been used as numerical schemes. As the results, the calculations have shown velocity and temperature distribution in combustion chamber as well as mole fraction of fuel and oxidizer.

• Fire Science and Engineering
• /
• v.28 no.4
• /
• pp.35-43
• /
• 2014

The prediction performance of 9 model sets, which combine 3 turbulent models and 3 combustion models, was investigated numerically for turbulent partially-premixed jet flame. The standard ${\kappa}-{\varepsilon}$ (SKE), Realizable ${\kappa}-{\varepsilon}$ (RKE) and Reynolds stress model (RSM) were used as a turbulence model, and the eddy dissipation concept (EDC), steady laminar flamelet (SLF) and unsteady laminar flamelet model (ULF) were also adopted as a combustion model. The prediction performance of those 9 model sets was evaluated quantitatively and qualitatively for Sandia D flame of which flame structure was measured precisely. The flame length was predicted as, from longest to shortest, RSM > SKE > RKE, and the RKE predicted the flame length of the jet flame much shorter than experiment. The flame temperature was over predicted by the combination of RSM + SLF or RSM + ULF while the flame length obtained by RSM + SLF and RSM + ULF was well agreed with the experiment. The combination of SKE + SLF and SKE + ULF predicts well the flame length as well as the temperature distribution. The SKE turbulence model was most superior to the other turbulent models, and SKE + ULF showed the best prediction performance for the structure of turbulent partially-premixed jet flame.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.1-1
• /
• 1998

로켓엔진 추력발생용으로 광범위하게 사용되는 액체추진제는 고성능, 대용량의 액체추진제 로켓엔진에서는 필연적으로 고주파 연소불안정의 문제를 수반하며, 이 연소불안정의 정도는 연소성능과 더불어 엔진개발의 성패를 좌우하는 중요한 여건이 된다. 따라서 안정한 로켓의 비행을 보장하기 위해서는 연소불안정의 문제가 선결되어야 한다. 연소불안정의 기본 메커니즘은 연소기에서 발생하는 압력섭동에 반응하여 불안정한 음향에너지를 되먹임하는 연소과정으로 설명된다. 연소불안정 현상이 발견된 이후 실험 및 이론적 접근에 의해 이와 같은 연소불안정 메커니즘 및 예측에 대한 체계적인 연구가 이루어져 왔으며, 현재까지의 다양한 고주파 연소불안정 예측방법 중에서 음향 및 기화 응답함수를 이용하는 방법은 직관적 고찰에 의존하는 단순한 연소모델을 적용하며 주로 음향적 섭동에 의한 연소의 반응을 연소안정성 평가의 파라메터로 사용한다. 이와 같은 음향적인 예측방법은 연소불안정 현상을 이론적으로 전개하므로 경제적으로 각종 설계변수에 대한 연소불안정의 변화를 구분할 수 있는 장점이 있어 성능 및 호환설계와 병행하여 로켓엔진 연소실의 초기 안정성 설계방법으로 주로 사용된다.