• Journal of Public Diplomacy
• /
• v.2 no.2
• /
• pp.1-26
• /
• 2022

Since the seminal publication of Joseph Nye's Soft Power, soft power became the central concept to public diplomacy. However, over-emphasis on soft power, which is still controversial, deterred academics from producing valuable knowledge that can be applied to practices in the field. Soft power is a cause and effect at the same time and thus it makes systematic analysis almost implausible because it is not only a tool for successful public diplomacy, but it is a result of successful diplomacy. This study aims at offering a theoretical framework linking soft power and public diplomacy by including various factors that may affect the outcomes of effective public diplomacy. This theoretical framework assessing the effectiveness of public diplomacy will make it possible to explore how and when new public diplomacy was adopted in a certain country and examine hard and soft power resources. The model also includes political system variables such as ideas and values, institutions, governance, leadership, and communication system, which are expected to influence public diplomacy effectiveness rather than soft power itself. The model yields the effectiveness of public diplomacy by assessing outcome and impact relative to input and output that are applicable to practices. The model is expected to enable both quantitative and qualitative studies generating possible propositions from the model with some preliminary outcomes of comparative case studies.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.255-258
• /
• 2009

본 논문에서는 최근 건축구조물의 보수보강에 사용되고 있는 복합재료보의 정확한 보강성능을 규명하기 위하여 다양한 실물 실험을 수행하였으며 실험 결과를 검토하여 실제 보강효과를 검증하였다. 콘크리트의 재료비선형을 고려할 수 있는 수치해석 기법으로 실험결과를 재현하여 보강효과를 수치해석적으로 검증하였으며 복합재료보를 이용하였을 경우 확보할 수 있는 보강효과에 대하여 연구하였다. 일반적인 철근콘크리트 구조물에 복합재료보를 이용하여 보강하였을 경우, 약 80% 내외의 하중 증가효과를 확보할 수 있었다. 또한 수치해석을 통하여 보강효과를 검토한 결과, 실물실험과 유사한 결과를 얻을 수 있었으며 복합재료보의 시공시 사용되는 전단연결재의 효과를 고려한다면 거의 동일한 결과를 얻을 수 있을 것으로 판단된다. 현재까지의 연구결과, 복합재료보를 이용하여 구조물을 보강한 경우, 취성이 증가하는 것으로 알려져있으나 추가적인 연구를 통하여 연성을 확보할 수 있는 복합재료보의 연구개발이 가능할 것으로 예상된다.

• Korean Journal Plant Pathology
• /
• v.12 no.2
• /
• pp.237-244
• /
• 1996

길항곰팡이 3종(Aspergillus sp. A101, Penicillium sp. B202, Trichoderma sp. C303), 길항세균 3종(Arthrobacter sp. AN303)또는 이들 모두의 혼합균주를 배양하여 creeping bentgrass 양묘장에 처리하여 Pythium blight, brown patch 및 dollar spot의 방제효과를 조사하였다. 또한 길항미생물 6종의 배양액을 살균제와 병용하여 그린에 살포하여 이들 토양병에 대한 방제효과를 조사하였다. 양묘장에서는 미생물의 종류에 관계없이 Pythium blight 억제효과가 커 3회 이상 미생물제 처리시 병이 전혀 발생하지 않았다. 그러나 brown patch와 dollar spot은 미생물제에 의한 방제효과가 크지 않았으며, 살균제에 의해 효과적으로 방제되었다. 미생물제와 살균(Pythium blight 방제용 살균제 제외)를 병용하여 처리한 그린에서는 살균제 단독처리와 비교할 때 brown patch는 유의적으로 억제되었고 Pythium blight와 dollar spot은 차이가 없었다.

• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.405-411
• /
• 2011

Using combinations of carbon and glass fiber composites normally used for strengthening of concrete structures, the hybrid effect from strengthening concrete structures using the composite is studied. To produce the hybrid effects, the specimens were made with optimum proportions of carbon fibers with glass fibers. Then, direct tensile tests were conducted on the hybrid FRP (fiber reinforced polymer) specimens. Unlike the woven fiber sheet currently used in construction sites, the FRP specimens have to be directly combined with the fibers, which make the work very complicated. Therefore, direct tensile test specimens manufacturing method based on the combination of high-tension carbon fibers and E-type glass fibers was proposed and the effects of hybridization is studied through the direct tensile test. By comparing the ductility index, the modulus of elasticity, and the stress-strain curves of the specimens, the most optimum glass to carbon fiber combination ratio for the hybrid FRP was found to be 9 to 1 with ductile K-type epoxy. The study results are discussed in detail in the paper.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.215-223
• /
• 2013

An experimental research on the possibility of using fiber reinforced concrete precast tunnel segments instead of traditional reinforced concrete(RC) segment has been performed in europe. This solution allows removing the traditional reinforcement with several advantages in terms of quality and cost reduction. Full-scale bending tests were carried out in order to compare the behaviour of the segments under flexural actions on both rebar reinforced concrete and rebar-fiber reinforced elements. The test results showed that the fiber reinforced concrete can substitute the traditional reinforcement; in particular the segment performance is improved by the fiber presence, mainly in terms of crack.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.91-99
• /
• 2004

Researches on the induced trench method using compressible materials such as clay, mud, straw have been performed to reduce the load acting on buried conduits under a high fill in USA and Canada. And in-situ tests on load reductionmethod using EPS block as a compressible inclusion have been performed in Japan and Norway. Using a EPS block as a compressible materials can have various benefits such as cost-effective design, enlargement of safety and easy construction of structure under high fills. This paper analyzes the arching material function of EPS which can result in reduction of earth pressure by arching effect in Corrugated Steel Pipe. A series of tests were conducted to evaluate the reduction of earth pressure on conduits using EPS. Based on field test it is found that the magnitude of vertical earth pressure on conduits was reduced to about 35∼40% compared with conventional flexible conduit systems.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.40-48
• /
• 2014

In this study, experimental research was carried out to evaluate and improve the seismic performance of reinforced concrete beam-column joint regions using strengthening materials (embedded CFRP rod and CFRP sheet) in existing reinforced concrete building. Therefore it was constructed and tested six specimens retrofitting the beam-column joint regions using such retrofitting materials. Specimens, designed by retrofitting the beam-column joint regions of existing reinforced concrete building, were showed the stable failure mode and increase of load-carrying capacity due to the effect of crack control at the times of initial loading and confinement of retrofitting materials during testing. Specimens RBCJ-SRC2, designed by the retrofitting of CFRP Rod and CFRP Sheet in reinforecd beam-column joint regions were increased its maximum load carrying capacity by 1.97 times and its energy dissipation capacity by 2.08 times in comparison with standard specimen RBCJ for a displacement ductility of 4 and 7. Also, specimens RBCJ-SRC2 were increased its maximum load carrying capacity by 1.09~1.11 times in comparison with specimen RBCJ-SR series. And Specimens RBCJ-CS, RBCJ-SR series, RBCJ-SRC2 were increased its energy dissipation capacity by 1.10~2.30 times in comparison with standard specimen RBCJ for a displacement ductility of 5, 6.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.209-216
• /
• 2017

One of the important considerations in structural designing the flat plate system is ensuring the resistance to punching shear caused by axial loads and the ductile ability to follow horizontal deformation under earthquake. In this study, the ECC (Engineered Cementitious Composite) has been placed in the critical section zone of punching shear at slab-column joint to improve ductility and the advanced details of shear reinforced area nearby critical section zone has been developed using stud and steel fiber. The shear performance tests were performed on the specimens with parameters of fiber type mixed with ECC, stud and steel fiber set into the shear reinforced area in which the failure pattern, joint strength, displacement and strain of the specimen were compared and analyzed. The test results showed that the strength and ductility of specimens with ECC applied to joint were better than those of RC flat plate system. Also, the shear reinforcement effect of stud and the ductility improvement of steel fiber concrete were confirmed in the shear reinforcement area.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.752-757
• /
• 2017

Analysis has been performed for the penetration of a long-rod into MMC/Ceramic layered armour system with several shot test and a series of simulations. Two types of MMC plate have been fabricated by a liquid pressing method; A356/45%vol.%SiCp with a uniform distribution of SiC particle and Al7075/45%vol.B4Cp with B4C particle. The mechanical properties were measured with the high-speed split Hopkins bar test, hardness test and compression test. The popular Simplified Johnson-Cook model was adopted to represent the material characteristics for FEM simulations. The performance of the MMC applied armour system has been made by comparing with the semi-infinite mild steel target using the depth of penetration(DOP). The results show that placing ceramic front layer provides a certain gain in protection, and that placing another ductile front layer provides a further gain. The application of MMC is found to be attractive.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.713-716
• /
• 2010

본 논문에서는 코리올리 효과를 가진 압전-구조 시스템의 주파수응답 해석을 효율적으로 수행하기 위한 크리로프 부공간 모델차수축소법을 제안하였다. 이 방법은 초기 유한요소모델과 축소모델의 전달함수의 계수인 모멘트를 일치시키는 방법을 이용하는 축소기법으로 이미 대형 유한요소모델의 주파수응답 해석에 효과적으로 이용되고 있다. 예제로 고려된 압전형 미소 각속도계의 해석에는 압전구동 하중과 구조체의 회전에 따른 원심력이 동시에 입력하중으로 고려되는 다중입력의 경우이므로 변환행렬 V의 생성시, block Arnoldi 과정을 이용하여 두 하중의 효과를 축소모델에 함께 고려한다. 본 문제에 제안된 축소기법을 이용한 결과, 축소모델을 이용하여 원래 시스템의 관심영역의 주파수응답을 작은 차수의 모델로도 정확하게 계산할 수 있음을 확인하였다. 본 논문에서 제안된 방법을 이용하면 다양한 가진조건과 각속도 입력 하에서의 주파수응답을 정확하고 더욱 효율적으로 계산할 수 있을 것이다.