• Title/Summary/Keyword: 연성법

Search Result 571, Processing Time 0.028 seconds

Analysis of Wave-Energy Propagation on Vibrating Coupled Beam-Type Structures (보형상 복합구조물 진동체에서의 파동에너지 전파에 대한 해석)

  • 길현권;홍석윤
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.6
    • /
    • pp.74-78
    • /
    • 1998
  • 보로 이루어진 복합구조물의 진동 에너지밀도와 파워를 구하기 위하여 파워흐름해 석법을 수행하였다. 복합구조물인 연성보에서는 구조 연결점에서의 파동변환에 따라 굽힘파, 종파, 비틀림파가 존재한다. 구조연결점에서 파동들의 파워투과와 반사를 고려하기 위해서는 파동전달법을 도입하였다. 이러한 파워흐름해석법을 이용하여 연성보에서 발생하는 열러 특 성의 파동들이 전달하는 에너지밀도와 파워의 공간적 분포 값을 엄밀해와 비교하였다. 결과 로써 파워흐름해석법은 고주파수영역에서 진동하는 연성보의 진동에너지와 파워의 공간적 분포를 예측하기 위해서 유용하게 사용될 수 있음을 보였다. 또한 파워흐름해석법의 중주파 수 영역에서의 적용 가능성에 대해 검토하였다.

  • PDF

Analysis of Vibration-Noise Characteristics of a Passenger Car (승용차의 진동 소음 특성 해석)

  • 성명호;이장무;김석현;박동철
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1993.10a
    • /
    • pp.87-92
    • /
    • 1993
  • 본 연구에서는 반연성해석(Semi-coupling analysis) 즉 음향 응답이 구조와 음향 시스템의 모달 계수로 표현되는 방법과 구조-음향 연성계수를 이용한 소음저감의 예를 제시한다. 이전까지의 연성해석에서는 해석의 신뢰성을 위 하여 실험에서 구한 구조 모우드를 사용하였다. 그러나 설계단계에서 차실소 음을 예측하고 설계변경의 자료를 제시하기 위해서는 유한요소법을 이용한 예측이 필수적이다. 본 연구에서는 부분 구조 합성법, 주요 결합부에 상세 유한요소 모델의 정적해석등에 의한 등가모델링 기법, 감도해석을 이용한 결 합부 모델링기법을 이용한 유한요소법 구조모우드해석과 그 결과를 이용한 연성해석의 결과를 보여준다.

  • PDF

Vibration Analysis for Infinite Length Waveguide Structures Connected with Finite Length Structures Using Impedance Coupling (유한 길이 구조물과 무한 길이 도파관 구조물의 임피던스 연성을 이용한 진동 해석)

  • Ryue, Jungsoo;Lee, Jaehong;Hong, Chinsuk;Shin, Ku-Kyun
    • The Journal of the Acoustical Society of Korea
    • /
    • v.34 no.5
    • /
    • pp.360-370
    • /
    • 2015
  • In case that an infinite length waveguide structure is connected with a finite length structure, it is required to combine a wave approach for the waveguide structure and a modal approach for the finite length structure to investigate the dynamic response of the connected target structure. In this study, the wavenumber finite element (WFE) analysis is adopted for the infinite length waveguide substructure and a finite element (FE) method is applied for the finite length substructure and then their results are coupled in terms of the impedance or mobility at the connected points between the substructures. As a structural model, an infinite length cylindrical shell with a rectangular plate inside is regarded. These two substructures are connected at the four corner points of the plate, rigidly or resiliently. From this investigation, it was confirmed that the wave approach (WFE method) and modal approach (FE method) can be combined by the impedance coupling.

Vibration of Pipes Coupled with Internal and External Fluids (내부 및 외부 유체와 연성된 파이프의 진동 해석)

  • Ryue, Jung-Soo
    • The Journal of the Acoustical Society of Korea
    • /
    • v.31 no.3
    • /
    • pp.142-150
    • /
    • 2012
  • The waveguide finite element (WFE) method is a useful numerical technique to investigate wave propagation along waveguide structures which have uniform cross-sections along the length direction ('x' direction). In the present paper, the vibration and radiated noise of the submerged pipe with fluid is investigated numerically by coupling waveguide finite elements and wavenumber boundary elements. The pipe and internal fluid are modelled with waveguide finite elements and the external fluid with wavenumber boundary elements which are fully coupled. In order to examine this model, the point mobility, dispersion curves and radiated power are calculated and compared for several different coupling conditions between the pipe and internal/external fluids.

Ductility Relationship of RC Bridge Columns under Seismic Loading (지진하중을 받는 철근콘크리트 교각의 연성도 상관관계)

  • 손혁수;이재훈
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.7 no.4
    • /
    • pp.51-61
    • /
    • 2003
  • This research is a park of a research program to develope a new design method for reinforced concrete bridge columns under axial load and cyclic lateral load. The objectives of this paper are to investigate the relationship between curvature ductility and displacement ductility and to propose a correlation equation for designing of reinforced concrete bridge columns under axial load and cyclic lateral load. Computer program NARCC was used for parametric study, which was proved to provide good and conservative analytical result especially for deformation capacity and ductility factor compared with test result. A total of 7,200 spirally reinforced concrete columns were selected considering the main variables such as section diameter, aspect ratio, concrete strength, yielding strength of longitudinal and confinement steel, longitudinal steel ratio, axial load ratio, and confinement steel ratio. A new equation between curvature ductility factor displacement ductility factor with the aspect ratio was proposed by investigation of 21,600 data produced from the selected column models by applying 3 different definitions of yield displacement.

Bending-Torsional Vibration Characteristics of Large Structures Influenced by Coupling Effects (연성효과에 의한 대형 구조물의 굽힘-비틀림 진동특성)

  • 송창용;손충열;송재영
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1995.10a
    • /
    • pp.208-216
    • /
    • 1995
  • 대형선박, 항공기, 초고층 건축물 등은 얇은 박판 형태의 보로 이상화하여 구조 및 진동해석을 수행할 수 있다. 이러한 형태로 이상화한 구조물은 비틀림 강도면에서 매우 취약함을 보이고, 굽힘-비틀림 진동은 단면형상에 따라 연성도가 심화된다. 상하 굽힘 진동은 탄성거동 영역에서 도심과 전단중심이 일치하는 대칭 진동(Symmetric vibration) 현상을 보인다. 그러나, 수평 굽힘 진동은 도심과 전단중심의 차이가 커질수록 즉, 연성도가 높아질수록 비틀림 진동과 복합되어 복잡한 비대칭 진동(Antisymmetric vibration) 현상을 나타낸다. 본 논문에서는 연성효과에 의한 수평 굽힘 진동과 비틀림 진동 현상에 대한 연구를 수행하였고, 진동계산을 위해서 전달행렬법(Transfer Matrix Method)을 사용하였다. 수치계산은 첫번째로, 도심과 전단중심의 차이가 매우 작아 연성도를 무시할 수 있을 정도의 구조물에 대해서 일반적인 수평 굽힘 진동 현상과 비틀림 진동 현상을 연구하였다. 두번째로, 연성도가 매우 심할 경우에 굽힘-비틀림 연성 진동 현상을 Timoshenko 보의 이론과 Vlasov 보의이로네 따라 각각 계산을 수행하였다. 마지막으로, 첫번째와 두번째 구조를 결합한 경우에 대해서 굽힘-비틀림 연성 진동 현상을 연구하였다. 이 경우에 두 구조물의 결합부에서 비틀림 강성과 Warping 강성의 심한 변화로 인한 불연속 경계면이 발생하게 되고 이때의 진동해석을 위해서 보 이론에 기초를 두고 상당히 높은 정확도를 제공하는 Haslum[2] 등과 Pedersen[3]이 제시한 이론을 이용하였다.

  • PDF

$J_{IC}$ Evaluation of Smooth and Side-Grooved CT Specimens in Structural Steel SB 41 (SB41 강의 평골 및 측면홈 CT시험편의 $J_{IC}$평가)

  • 오세욱;안광주;윤영재
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.10 no.4
    • /
    • pp.494-503
    • /
    • 1986
  • 본 연구에서는 저강도.고연성재인 일반구조용압연강 SB41의 평골 CT 시험편과 양측면홈이 있는 CT시험편을 사용하여 ASTM R유선법, JSME R유선법,SZW법, 초음파법 및 전입차법에 따라 J$_{IC}$를 종합적으로 평가하였다. 복수시험편법인 ASTM 및 JSME 및 JSME R유선법을 상호 비교고찰하므로써 저강도.고연성재에 대한 파환인성평가 의 적용한계를 명확히 하였으며 단일시험편법인 초음파 및 전입차시험법은 효율적이고 간편한 J$_{IC}$평가법임을 확인하였다.

FSI Analysis of Structure Using Recursive Component Mode Synthesis (재귀 부분 합성법을 이용한 구조물 유체-고체 연성 해석)

  • Kim, Chang-Wan
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2010.04a
    • /
    • pp.215-216
    • /
    • 2010
  • 본 논문에서는 재귀 부분 구조 합성법을 이용하여 유체와 고체가 연성된 구조물에 대한 거동을 해석하였다. 이 방법은 일반적으로 널리 사용하는 랜쵸스 방법과 비교하여 몇 배나 빠른 계산 결과 시간에 문제를 풀었음에도 거의 동일한 해를 얻을 수 있는 장점이 있다.

  • PDF

Estimated Soft Information based Most Probable Classification Scheme for Sorting Metal Scraps with Laser-induced Breakdown Spectroscopy (레이저유도 플라즈마 분광법을 이용한 폐금속 분류를 위한 추정 연성정보 기반의 최빈 분류 기술)

  • Kim, Eden;Jang, Hyemin;Shin, Sungho;Jeong, Sungho;Hwang, Euiseok
    • Resources Recycling
    • /
    • v.27 no.1
    • /
    • pp.84-91
    • /
    • 2018
  • In this study, a novel soft information based most probable classification scheme is proposed for sorting recyclable metal alloys with laser induced breakdown spectroscopy (LIBS). Regression analysis with LIBS captured spectrums for estimating concentrations of common elements can be efficient for classifying unknown arbitrary metal alloys, even when that particular alloy is not included for training. Therefore, partial least square regression (PLSR) is employed in the proposed scheme, where spectrums of the certified reference materials (CRMs) are used for training. With the PLSR model, the concentrations of the test spectrum are estimated independently and are compared to those of CRMs for finding out the most probable class. Then, joint soft information can be obtained by assuming multi-variate normal (MVN) distribution, which enables to account the probability measure or a prior information and improves classification performance. For evaluating the proposed schemes, MVN soft information is evaluated based on PLSR of LIBS captured spectrums of 9 metal CRMs, and tested for classifying unknown metal alloys. Furthermore, the likelihood is evaluated with the radar chart to effectively visualize and search the most probable class among the candidates. By the leave-one-out cross validation tests, the proposed scheme is not only showing improved classification accuracies but also helpful for adaptive post-processing to correct the mis-classifications.

간이 Fine-Blanking 가공 기술 개발

  • 윤경구;황경현;이성국
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1993.04b
    • /
    • pp.49-52
    • /
    • 1993
  • 금속의 가공공정에 있어 중요한 인자중의 하나인 재료의 연성은 환경뿐만 아니라 주변압력에 따라 변화한다는 사실이 20세기에 들어 여러 연구자들에 의해 밝혀졌고 1950년대 Birdgman에 의해 최초로 실험적인 방법으로 증면되었다. 재료의 이와같은 현상을 압력유도연성이라 하는데 이는 주변압력이 재료 내부에서의 공동발생 및 그 성장에 관계하기 때문인 것으로 알려졌다. 공동의 합체 및 성장은 연성파괴의 전체조건이 되므로 이를 억제하면 성형성 및 연성이 증가됨을 알 수 있다. 금속의 압력 유도 연성을 이용한 가공방법을 가압금속형형이라 한다. 최근에 가압금속형의 범주는 크게늘고 있 는데 특히, 성형,블랭킹, 분말야금법 등에 널리 이용되고 있다. 정수압의 크기에 다른전단면의 상태 변화 즉, 소성 변형능에 관한 연구는 Fine-Blanking가공이론에 적용, 해석되고 있다.