• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.97-107
• /
• 2017

In the field of automatic door, the infrared rays and microwave sensor are much used as the important components in charge of the motor's operation control of open and close through the incoming signal of object recognition. In case of existing system that the sensor of the infrared rays and microwave are applied to the automatic door, there are many malfunctions by the infrared rays and visible rays of the sun. Because the automatic doors are usually installed outside of building in state of exposure. The environmental change by temperature difference occurs the noise of object recognition detection signal. With this problem, the hardware fault that the detection sensor is unable to follow the object moving rapidly within detection area makes the sensing blind spot. This fault should be improved as soon as possible. Because It influences safety of passengers who use the automatic doors. This paper conducted an experiment to improve the detection area by installing extra ultrasonic sensor besides existing detection sensor. So, this paper realize the computing circuit and detection algorithm which can correctly and rapidly process the access route of objects moving fast and the location area of fixed obstacles by applying detection and advantages of ultrasonic signal to the automatic doors. With this, It is proved that the automatic door applying ultrasonic sensor is improved detection area of blind spot sensing through field test and improvement plan is proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.7-13
• /
• 2012

The performance of blind equalization algorithm ISCA was compared with MSCA that is used for the minimization of the inter symbol interference which occurs in the time dispersive communication channel for digital transmission. Because of the non-linearities of a magnitude and phase transfer characteristics of a communication channel, the transmitting signal will be received that band limited and time dispersived. Therefore the distortion was compensated by using the self adaptive equalizer at the receiving side, then passing through the detector for the decision of "1" or "0". At this time the Constellation Dependent Constant is played an important role in the adaptive equalizer used on the receiver. In order to calculation of this constant, the ISCA and MSCA was used the second order statistics. The ISCA and MSCA which are possible to compensation of mensioned transfer function simulataneously, are improved the performance of original SCA algorithm and then was compared the performance by computer simulation. For this, the recovered constellation, residual isi and MSE was used, and a result of performance comparison, the ISCA algorithm has better than the MSCA in every performance index. But on the steady state of equalizer, the variation of performance due to the CME terms in the MSCA equalization algorithm was less than the ISCA, so MSCA has better stability.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.77-82
• /
• 2017

This paper related with the VSS_SE-MMA (Varying Step Size_Signed Error-MMA) which possible to improving the equalization performance that employing the varying adaptive step size based on the nonlinearities of error signal of SE-MMA (Signed Error-MMA), compensates the intersymbol interference by distortion occurs at the communication channel, in the transmitting the spectral efficient nonconstant modulus signal such as 16-QAM. The SE-MMA appeared to the reducing the computational arithematic operation using the polarity of error signal in the updating the tap coefficient of present MMA adaptive equalizer, but have a problem of equalization performance degradation. The VSS_SE-MMA improves the problem of such SE-MMA, using the varying step size consider the error signal in the update the adaptive equalizer tap coefficient, and its improved performance were confirmed by simulation. For this, the output signal constellation of equalizer, the residual isi and maximum distortion, MSE and SER were applied. As a result of computer simulation, it was confirmed that the VSS_SE-MMA algorithm has nearly same in convergence speed and has more good performance in every performance index at the steady state.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.9-19
• /
• 2012

As the clock frequency increases, CPU performance improves continuously. However, power and thermal problems in the CPU become more serious as the clock frequency increases. For this reason, utilizing the GPU to reduce the workload of the CPU becomes one of the most popular methods in recent high-performance computer systems. The GPU is a specialized processor originally designed for graphics processing. Recently, the technologies such as CUDA which utilize the GPU resources more easily become popular, leading to the improved performance of the computer system by utilizing the CPU and GPU simultaneously in executing various kinds of applications. In this work, we analyze the temperature and the energy efficiency of the computer system where the CPU and the GPU are utilized simultaneously, to figure out the possible problems in upcoming high-performance computer systems. According to our experimentation results, the temperature of both CPU and GPU increase when the application is executed on the GPU. When the application is executed on the CPU, CPU temperature increases whereas GPU temperature remains unchanged. The computer system shows better energy efficiency by utilizing the GPU compared to the CPU, because the throughput of the GPU is much higher than that of the CPU. However, the temperature of the system tends to be increased more easily when the application is executed on the GPU, because the GPU consumes more power than the CPU.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.31-47
• /
• 2008

As OWL(Web Ontology Language) has been selected as a standard ontology description language by W3C, many ontologies have been building and developing in OWL. The lena developed by HP as an Application Programming Interface(API) provides various APIs to develop inference engines as well as storages, and it is widely used for system development. However, the storage model of Jena2 stores most owl documents not acceptable into a single table and it shows low processing performance for a large ontology data set. Most of all, Jena2 storage model does not consider hierarchical structures of classes and properties. In addition, it shows low query processing performance using the hierarchical structure because of many join operations. To solve these issues, this paper proposes an OWL ontology relational database model. The proposed model semantically classifies and stores information such as classes, properties, and instances. It improves the query processing performance by managing hierarchical information in a separate table. This paper also describes the implementation and evaluation results. This paper also shows the experiment and evaluation result and the comparative analysis on both results. The experiment and evaluation show our proposal provides a prominent performance as against Jena2.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.35-41
• /
• 2008

This paper presents the design method of current-mode signal processing for high speed and low power digital audio signal processing. The digital audio processor requires a digital signal processing such as fast Fourier transform (FFT), which has a problem of large power consumption according to the settled point number and high speed operation. Therefore, a current-mode signal processing with a switched Current (SI) circuit was employed to the digital audio signal processing because a limited battery life should be considered for a low power operation. However, current memory that construct a SI circuit has a problem called clock-feedthrough. In this paper, we examine the connection of dummy MOS that is the common solution of clock-feedthrough and are willing to calculate the relation of width between dummy MOS for a proposal of the design methodology for improvement of current memory. As a result of simulation, in case of that the width of memory MOS is 20um, ratio of input current and bias current is 0.3, the relation of width between switch MOS and dummy MOS is $W_{M4}=1.95W_{M3}+1.2$ for the width of switch MOS is 2~5um, it is $W_{M4}=0.92W_{M3}+6.3$ for the width of switch MOS is 5~10um. Then the defined relation of MOS transistors can be a useful design guidance for a high speed low power digital audio processor.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.29-39
• /
• 2015

This paper describes a design and implementation of fuzzy-based algorithm for hand-shake state detection and error compensation in the mobile optical image stabilization(OIS) motion detector. Since the gyro sensor output of the OIS motion detector includes inherent error signals, accurate error correction is required for prompt hand-shake error compensation and stable hand-shake state detection. In this research with a little computation overhead of fuzzy-based algorithm, the hand-shake error compensation could be improved by quickly reducing the angle and phase error for the hand-shake frequencies. Further, stability of the OIS system could be enhanced by the hand-shake states of {Halt, Little vibrate, Big vibrate, Pan/Tilt}, classified by subdividing the hand-shake angle. The performance and stability of the proposed algorithm in OIS motion detector is quantitatively and qualitatively evaluated with the emulated hand-shaking of ${\pm}0.5^{\circ}$, ${\pm}0.8^{\circ}$ vibration and 2~12Hz frequency. In experiments, the average error compensation gain of 3.71dB is achieved with respect to the conventional BACF/DCF algorithm; and the four hand-shake states are detected in a stable manner.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.7
• /
• pp.747-756
• /
• 2014

In this paper, we propose a path loss model with the multiple antennas using diversity effect. Currently wireless communication systems use the multiple antennas in order to improve the channel capacity or diversity gain. However, until recently, many researches on path loss model only consider geographical environment between the transmitter and the receiver. There is no study about path loss model considering diversity effect. Nowaday wireless communication use the multiple antennas and we in common find examples using diversity scheme that is method in order to enhance a channel capacity. Moreover we anticipate that it work harder in future researches. But in this communication system, path loss model isn't established that predict strength of received signal. So, in order to predict strength of received signal, we take changing SNR by diversity gain. When exceeding the number of antennas of receiver are 7 in proposed model, diversity effect is saturated. Therefore we consider the number of antenna of receiver until 10. We find RMSE between proposed model and value of calculation is 1. We calculate the diversity gain by conventional BER curve. Proposed model can predict loss of received signal in system using multiple antennas.

• Journal of the Korean School Mathematics Society
• /
• v.18 no.4
• /
• pp.431-448
• /
• 2015

Elementary school teacher selection test has to be implemented for knowledge(MKT) to estimate and to be a step in the expansionary direction. For this, It has to be analyzed closely in terms of teacher's MKT first that questions set from selection tests until now. In this research, some standards were established by type of question, grade, contents field and subject from 84 mathematics questions set at examinations. And it was analyzed concretely by general tendency and produced the results of analysis related to elementary teacher's MKT in elementary school teacher selection test since year 2000. The results showed that descriptive and short answer type was mostly set(71.4%) in type of question and integrated grade type was mostly set(41.7%) in type of grade in elementary school teacher selection test. And in type of contents field, rated from highest to lowest, number and operations(31.0%), measurement(23.8%), figure(15.5%) were set. Textbook/manual(34.5%), solution of problem(26.2%), learning psychology(13.1%) in status of subject were followed in order, but there's no relationship with estimation. This research was based on a standard of precedent study and made an analysis of elementary mathematics questions of selection test since year 2000. Therefore, it has a meaning because of produced results from analysis related to elementary teacher's MKT.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.48-58
• /
• 2012

With the development of sensing devices and wireless communication technologies, wireless sensor networks are composed of a large number of sensor nodes that are equipped with limited computing performance and restricted communication capabilities. Besides, the sensor nodes are deployed in hostile or unattended environments. Therefore, the wireless sensor networks are vulnerable to security. In particular, the fatal damage may be occurred when data are exposed in real world applications. Therefore, it is important for design requirements to be made so that wireless sensor networks provide the strong security. However, because the conventional security schemes in wired networks did not consider the limited performance of the sensor node, they are so hard to be applied to wireless sensor networks. In this paper, we propose a secure multipath transmission scheme based on one-way hash functions in wireless sensor networks considering the limited performance of the wireless sensor nodes. The proposed scheme converts a sensor reading based on one of one-way hash functions MD5 in order to make it harder to be cracked and snooped. And then, our scheme splits the converted data and transfers the split data to the base station using multi-path routing. The experimental results show that our proposed scheme consumes the energy of just about 6% over the existing security scheme.