• 한국정밀공학회지
• /
• 제13권12호
• /
• pp.38-45
• /
• 1996

A new grinding wheel was developed for the high performance grinding of difficult-to-grinding materials. The grinding performance of the newly developed wheel including grinding forces, grinding ratio, and surface roughness of ground surface was evaluated through experiments. Experimental results show that the performance of the newly developed wheel is superior to the conventional alumina wheel and comparable to the Sol-gel wheel. An experimental investigation on the wear of alumina grinding wheel was also carried out. The experiments consist of the measurements of fracture strength of the abrasive grains, grinding force, and the area of wear flats of grinding wheels. Microscopic examination of abrasive grains was executed to observe the progress of wheel wear. The results indicate that the 32A grain, which has relatively lower fracture strength, wears out faster than 5SS and 5SG. The wheel wear occurs much faster in wet grinding than in dry grinding. It has also been found that the grinding forces increase logarithmically with increasing wear flats.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.99-105
• /
• 1995

This paper provides a highly efficient grinding for ferrous materials using ELID-grinding method. The grinding efficiency using ELID gring method with CIFB-cBN wheel and CB-cBN wheel is compared with general grinding method with V-cBN wheel. This paper measured grinding ratio for plunge grinding and grinding resistance for traverse grinding in order to investigate grinding ability. The results show that ELID grinding methods is useful for the high efficient grinding of ferrous materials.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.185-188
• /
• 2002

An abrasive vitreous bonded solid mass having a vitrified abrasive structure comprising diamond grains which are held by an in inorganic bonding agent, the vitrified diamond wheel is impregnated with a composition which comprises a thermosetting synthetic resin and a surfactant. The vitrified diamond wheel is manufactured by preparing the composition including the resin and the surfactant, impregnating the abrasive structure with the composition, and curing the composition. The diamond wheel newly developed showed excellent performance in grinding carbide.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.150-156
• /
• 2001

This paper deals with the theoretical estimation and its experimental verification of grinding wheel wear in surface grinding process. A theoretical formulation is provided to predict the grinding wheel wear in surface grinding. To validate the theoretical prediction, the grinding wheel wear is measured by using a laser scanning micrometer. The associated surface roughness and grinding farce are also investigated both theoretically and experimentally. Through a series of simulations and experiments, it is shown that the predictions are in good agreement with the experimental results.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.45-52
• /
• 2000

To reduce two preprocess operations to one in the surface grinding operation the laminated grinding wheel was introduced and its availability has already been investigated in the cylindrical grinding process. Thus in this study the experiment was carried out to attempt to prove that the laminated grinding wheel can be used in the surface grinding process with respect to the roughness and grinding force.

• 한국정밀공학회지
• /
• 제1권2호
• /
• pp.10-14
• /
• 1984

연삭가공은 숫돌을 구성하는 하나 하나의 입자가 공작물을 절삭하는 과정이므로 연삭현상을 이해하기 위해서는 먼저 개개 절돈의 절삭현상을 알지 않으면 안된다. 연삭입자의 절삭현상을 해명함에 있어서 기초가 되는 것은 입자와 공작물과의 간섭형상이다. 종래의 연삭 이론은 이와같은 기하학적 간섭형상이 모두 chip이 되어 제거된다(연소입자와 공작물과의 간섭 과정에서는 절삭현상만이 존재한다.)는 가정하에 연삭기구를 해석하려 하였으나 최근에 이르러 상호간섭 조건을 경계조건으로 하여 많은 사람들에 의해 연소입자의 절삭현상을 연구한 결과 연삭입자의 절삭과정은 과도적 절삭임이 밝혀졌다. 이와같은 연삭현상은 새로운 연삭이론에 기초가 될 뿐만아니라 Chip 과 표면생성기구의 관점에서도 극히 중요한 것이 된다.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.20-24
• /
• 1999

Grinding System is very difficult to examine closely wear phenomenon or dynamic characterastic because it is very complex and different from a general cutting system, Considering automatization and precision it is very important to examine closely grinding system. In this study grinding wheel surface is acquired by using computer vision system in order to explain wear and loading phenomenon. We investigate the relationship between wear and Fourier spectrum of acquired image and observe the entropy variation in the process of manufacturing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1113-1116
• /
• 2001

Recently, the needs of non-symmetric spherical lens are increasing. Machining non-symmetric spherical lens by general method is limited. This paper researches grinding machine method for non-symmetric spherical lens and accruable problems at processing lens using CAD/CAM. In addition, this paper researches the relation of curvatures to grinding wheel sizes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.56-60
• /
• 1996

An experimental study on the grinding temperature and Acoustic Emission(AE) signals due to the different shapes of wheel was conducted. The grinding characteristics by slotted shapes of wheel changed by width and helical angle, were compared with those by general one. Lower grinding temperature was obtained for 30$^{\circ}$ helical angle with 10mm width, Root Mean Square(RMS) values of AE signals were higher for slotted wheel rather than general one.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.165-171
• /
• 2000

To get smoother ground surface, it is required to replace the grinding wheel with a finer-grit wheel. When the operator replaces the grinding wheel, the balancing and dressing of the wheel surface are necessary. So this replacement has a lot of problems like inconvenience to operators, delays in the operation time, and ineffectiveness in the production process. Therefore, a laminated grinding wheel, which consists of three layers, is provided. The side layers are coarse grits and the middle layer is made up of fine grits. To show the effectiveness of the laminated grinding wheel, experiments on the surface roughness and the material removal rate were performed respectively. As a result, it was found that the grinding process using a laminated grinding wheel can generate smoother ground surface in shorter time.