Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Estimation and Experimental Verification of Grinding Wheel Wear in Surface Grinding Process

평면 연삭에서의 연삭 숫돌 마모 추정 및 실험적 검증

  • Ju, Gwang-Hun (Graduate School of Kumoh National Institute of Technology) ;
  • Lee, Eung-Suk (Korea Institute of Machinery and Materials) ;
  • Kim, Hyeon-Su (Graduate School of Kumoh National Institute of Technology) ;
  • Hong, Seong-Uk (Dept.of Machanical Engineering, Kumoh National Institute of Technology) ;
  • Park, Cheon-Hong (Korea Institute of Machinery and Materials)
  • Published : 2001.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with the theoretical estimation and its experimental verification of grinding wheel wear in surface grinding process. A theoretical formulation is provided to predict the grinding wheel wear in surface grinding. To validate the theoretical prediction, the grinding wheel wear is measured by using a laser scanning micrometer. The associated surface roughness and grinding farce are also investigated both theoretically and experimentally. Through a series of simulations and experiments, it is shown that the predictions are in good agreement with the experimental results.

Keywords

References

  1. 주광훈, 김현수, 홍성욱, 박천홍, 'LSM을 이용한 연삭 숫돌 마모 모니터링,' 한국정밀공학회지, Vol. 17, No. 12, pp.82-87, 2000
  2. 이응숙, 원통 연삭 작업의 시뮬레이션에 관한 연구, 박사학위논문, 한국과학기술원 기계공학과, 1997
  3. T. Suto, H. Inoue, T. Waida, H. Noguchi, K. Tanakohri, T. Sata, 'A newly developed in-process sensor for detecting active grain wear in grinding operation,' Annals of the CIRP, Vol.25, No. 1, pp. 229-234, 1975
  4. T. Suto. and T. Sata, 'Simulation of grinding process based on wheel surface characteristics,' Bull. Japan Soc. of Prec. Eng., Vol. 15, No.1, pp. 27-33, 1981
  5. 小野浩二, 硏削仕上, 眞書店, 東京, pp. 21-24, pp. 50-80, 1952
  6. S. Malkin, Grinding technology : Theory and Application of Machining with Abrasives, Chapter 3, 5, 7, 8, John Wiley & Sons, New York, 1988
  7. E. S. Lee, J. K. Lee, M. Y. Yang, 'Simulation of cylindrical plunge grinding based on the behaviour of cutting edge wear,' Int. J. Prod. Res., Vol. 35, No. 10, pp. 2917-2937, 1997 https://doi.org/10.1080/002075497194516
  8. J. Verkerk, 'The real contact length in cylindrical plunge grinding,' Annals of the CIRP, Vol. 24, No. 1, pp. 259-264, 1975
  9. M. Maris, R. Snoeys, J. Peters, 'Analysis of plunge grinding operations,' Annals of the CIRP, Vol. 24, No. 1, pp. 225-230, 1975
  10. L. Tigerstrom, 'A model for determination of number of active grinding edges in various grinding process,' Annals of the CIRP, Vol. 24, No. 1, pp. 271-275, 1975