• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.35-39
• /
• 2001

The precision grinding process is carried out with fine-cutting operation after coarse-cutting operation. So, the laminated grinding wheel has been developed to reduce the ineffectiveness induced by changing the operations. In this study, to investigate the possibility of the practical use of the laminated grinding wheel, the surface residual stress of the workpiece ground by the laminated grinding wheels was compared with that ground by the general grinding wheel, and the influence of the difference in grain sizes, between the coarse grit and fine grit of the laminated grinding wheel, on the surface roughness of the workpiece was investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5704-5708
• /
• 2012

In this paper, the algorithm to determine the optimal condition of traverse grinding is proposed by using differential evolution algorithm(DEA). The cost function to determine the optimal grinding condition is designed with considering process cost, production rate, surface roughness. Also, the constraint conditions for grinding such as thermal damage effect, machine tool stiffness, wear parameter of grinding wheel, surface roughness are considered. The algorithm is implemented with LabView software which is widely used at the industrial field. The performance of proposed algorithm is verified by comparing with the result of genetic algorithm(GA) through computer simulation.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.118-122
• /
• 2001

In this study, the variation of surface roughness was tested in surface grinding for the three working materials SM45C, heat-treated SM45C, and gray cat iron. IT was performed for the various grinding wheels with two grain size #60, #100, and three grade I, O, R and various grinding depths and feeds, The fractural grinding depths which were obtained when the grinding wheels were destructed in surface grinding works, were examined and compared with the calculated value sug-gested in this study, The results showed that the surface roughness was decreased by decreasing grinding depth, and feed, and increasing grain size and grades. The fracture grinding depths were increased by increasing grain size, grade and feed.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.2
• /
• pp.63-67
• /
• 2008

3D integration technology has been a major focus of the next generation of IC industries. In this study Si wafer ultra-thinning has been investigated especially for the effect of ultra-thinning on the silicon surface. Wafers were grinded down to $30{\mu}m\;or\;50{\mu}m$ thickness and then grinded only samples were compared with surface treated samples in terms of surface roughness, surface damages, and hardness. Dry polishing or wet etching treatment has been applied as a surface treatment. Surface treated samples definitely showed much less surface damages and better roughness. However, ultra-thinned Si samples have the almost same hardness as a bulk Si wafer.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.27-36
• /
• 2001

본고에서는 고정도 제품을 생산하는 연삭기에 대해 가공물 및 연삭 공구인 연삭 숫돌을 기상에서 측정하기 위한 여러 가지 방법들을 소개하였고 일부는 적응 예를 기술하였다. 소개된 기상 측정장치들은 특히 반복 공정이 필요한 연삭 현장에서 생산성 향상을 위해 유용하게 활용될 수 있을 것으로 생각된다. 그러나 관련 연구가 지속된다면 연삭기의 작업조건 자동 설정, 연삭 상태 진단 등, 연삭기의 지능화에도 적극적으로 응용될 수 있을 것으로 기대된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.285-288
• /
• 2000

This paper deals with the theoretical estimation and its experimental verification of grinding wheel wear in surface grinding process. A theoretical formulation is provided to predict the grinding wheel wear in surface grinding. The associated surface roughness and grinding force are also investigated both theoretically and experimentally. Through a series of simulations and experiments, it is shown that the predictions are in good agreement with the experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.46-54
• /
• 1995

This paper presents a simple method for measurenemt of roughness of ground surfaces. The present method utilizes fluxes of scattered lights condensed through lenses aligned along the specular direction. A theoretical analysis is preformed for the purpose of investigating the possibility of the method as well as determining the experimental condition. Experiments are also performed to show the effectiveness and robustness of the proposed method. The theoretical and experimental results show that the proposed method is simple enouth to implement and has a potential to identify a wide range of roughness of ground surfaces.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.243-244
• /
• 2007

본 연구에서는 성형용 코어 가공에서 초경합금(WC, Co 0.5%)의 초정밀 가공특성을 파악하기 위하여 다이아몬드 휠의 메시, 주축 회전속도, 터빈 회전속도, 이송속도 및 연삭깊이에 따른 표면거칠기를 측정하여 최적연삭조건을 규명하였다. 규명된 최적연삭가공조건을 활용하여 페러렐 연삭법으로 초정밀 연삭가공을 수행하였다. 연삭가공은 초정밀가공기(ASP01, Nachi-Fujikoshi Co., Japan)를 사용하였다. 최종 정삭가공을 수행한 비구면 성형용 코어의 형상측정결과 형상정도(PV; ${\varphi}$ 3.0mm) 0.15${\mu}m$(비구면), 0.10${\mu}m$(평면)으로 3M급 이상의 고화질 카메라폰에 채용되고 있는 비구면 Glass렌즈 양산용 성형용 코어 규격에 만족한 결과로서 본 연구에 수행된 초정밀 가공조건 및 측정방법이 매우 유효함을 알 수 있었다. 형상정도(PV) 및 표면조도(Ra) 측정은 초정밀 자유곡면 측정기(UA3P, Panasonic Co., Japan)와 3차원 표면조도 측정기(NewView5000, Zygo Co., USA)를 각각 사용하였다. 초정밀 가공된 성형용 코어면에 이온증착법을 활용하여 DLC 코팅을 수행하였다. 코팅 전후의 성형용코어를 활용하여 Glass소재(K-BK7, Sumita Co., Japan)를 최적의 성형조건(성형온도, 압력, 냉각속도)으로 성형하였다. DLC 코팅과 성형은 DLC 코팅기(NC400, Nanotech Co., Japan)와 Glass렌즈 성형기(Nano Press-S, Sumitomo Co., Japan)을 각각 사용하였다. Fig. 1은 초정밀 연삭가공, DLC 코팅막 구조, 코팅된 성형용 코어, 그리고, 성형된 비구면Glass렌즈를 각각 나타낸다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.870-874
• /
• 2000

This investigation reports the grinding characteristics of titanium alloy(Ti-6Al-4V). Grinding experiments were performed at various grinding conditions and the grinding forces and specific grinding energies were measured to investigate the grindability of titanium alloy with the three different wheels including Diamond, Green carbide and Alumina. To investigate the grinding characteristics of titanium alloy grinding force, force-ratio, specific grinding energy and grinding -ratio, were measured. Surface roughness was also measured with tracer and the ground surfaces were observed with SEM. Force-ratio of grinding of titanium alloy was very lower than that of grinding of SKD-11. Specific grinding energy are almost five times larger and rougher surface was obtained in titanium grinding.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.35-41
• /
• 2010

In this paper, surface roughness has been experimentally identified using laser scattering images. The parameters and optical deflected rays of laser scattering are investigated on laser scattering system, and then their optimum parameters on grinding surfaces are selected using design of experiment. The application of the optimum parameters results in featured laser scattering images, in which the mean of vertical scattering distributions is regarded as a feature. It is shown that the feature of laser scattering distributions is linearly increased according to grinding surface roughness and so the information can be used as important factor for the measurement and evaluation of various surface roughness. In the future, the performance of the proposed laser scattering method will be evaluated using AFM.