• Journal of Soil and Groundwater Environment
• /
• v.12 no.4
• /
• pp.78-85
• /
• 2007

This study provides an attempt to evaluate sanding wastes, generated from a chemical company as a reused adsorbent. Organic impurities in the raw sanding wastes were removed by calcination at $550^{\circ}C$. Aluminum was a major inorganic composition in the raw sanding wastes and increased from 29.09% to 52.73% after calcination. Dissolved concentrations of heavy metals from the calcined sample were below 0.3 mg/L in a stability test at pH 2. From the pH-edge adsorption experiments with the calcined sanding wastes, As (V) was found to follow an anionic-type adsorption. Adsorption isotherm obtained with variation of the dosage of the calcined sanding wastes was better described by Freundlich equation than Langmuir one. Freundlich constants of K and 1/n were 4.244 and 0.316, respectively. The As (V) adsorption capacity of calcined sanding wastes estimated from Langmuir isotherm was 13.25 mg/g. From this study, the calcined sample was identified as a good reusable adsorbent in the view point of stability and adsorption capacity on As (V).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.769-772
• /
• 2011

We propose a sweeping machine is equipped with a polyester filter to retain small particles of dust. The filter is washable and can be easily removed for maintenance purpose or eventual replacement. Research continues into key areas such as making the structure of machine as ship' s floor grinder as possible, and designing algorithms and systems for efficiency-related system technologies.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.5
• /
• pp.512-517
• /
• 2014

This paper describes the development of new sweeping machine based on Cyclone Technology, which maintains constant suction power and uses it in a industrial applications as a method for dust removed from grinding work. The performance of a cyclone separator is determined by the turbulence characteristics and particle-particle interaction. To achieve this goal, we design cyclone technology based dust separator for sweeping machine has been proposed as a system which is suitable to work utilizing dust suction alternative to conventional manual system. and Numerical analysis with computational fluid dynamics(CFD) was carried out to investigate the working fluid that flow into cyclone dust separator in order to design optimal structure of the sweeping machine. The validation of cyclone model with CFD is carried out by comparing with experimental results.

• Bulletin of the Korean Institute for Industrial Safety
• /
• v.1 no.1
• /
• pp.1-6
• /
• 2001

생활양식의 변화와 정밀산업의 발달로 고체 덩어리나 입자를 분쇄하여 분체의 형태로 사용, 취급, 저장하는 빈도가 증가하고 있으며, 이들 중 분체가 가연성인 경우에는 공기 또는 산소와의 접촉면적이 커서 비교적 쉽게 착화할 뿐 아니라 급격한 연소를 일으켜 화재·폭발의 위험성이 항상 존재하고 있다고 할 수 있다. 이와 같은 위험성을 가지는 가연성 분진에는 소맥분, 전분, 사탕 등의 식료품을 비롯하여 가축용 사료분진, 각종금속, 플라스틱 및 화학제품 등의 가공용 분진, 약품, 연료로 사용되는 석탄 뿐 아니라 섬유부스러기, 연마시의 분진 등을 들 수 있다. 특히 최근에는 신소재로서의 기능성 물질과 전자재료의 개발이 활발하게 진행되어 이 분야에서 분체를 취급하는 공정도 증가하고 있는 실정이다.(중략)

• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.101-109
• /
• 2008

The adsorption characteristics of cationic metals such as copper, cadmium, and lead onto the amorphous aluminum oxide, AMA-L, which was mineralized from raw sanding powder at $550^{\circ}C$ were investigated. Additionally, surface complexation reaction of cationic heavy metals onto AMA-L was simulated with MINEQL + software employing a diffuse layer model. From the batch adsorption tests in a single element system, the adsorption affinity of each metal ion onto AMA-L was following order: lead > copper > cadmium. In a binary system composed with copper and cadmium, quite a similar adsorption affinity was observed in each metal ion compared to the single element system. When the surface complexation constants obtained in the single system were used in the prediction of experimental adsorption results, model predictions were well fitted with experimental results of both single and binary systems.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.116-119
• /
• 2003

본 연구에서는 LCD 공정에 사용되는 ball spacer를 전해 연마(Electro-Polishing, EP) 처리된 스테인리스(stainless)관 내부에서 마찰대전으로 하전시켜 하전량을 측정하는 하전 메커니즘과 하전 특성을 관찰하였다. Ball spacer의 농도를 일정하게 하고, 유입하는 공기의 유량을 201pm, 301pm으로 변화시키면서 실험하였다. 유입되는 공기의 유량은 일정하게 하여 ball spacer의 농도를 분진공급장치(dust feeder)를 통해 변화시키면서 하전수를 측정하였다. 이 때 측정결과는 EP 처리된 스테인리스관에 유입되는 공기의 유량이 증가했을 때, 하전이 더 많이 되는 것을 보여주었다. 또한 일정한 공기의 유량에서 주입되는 ball spacer의 농도가 증가했을 때 입자당 하전수가 증가하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4732-4737
• /
• 2011

A standing grinder with a vacuum dust collection, which works grinding a surface and collecting dust occurred simultaneously, is needed to clean the surface before painting, or to remove a weld bead burr in the industrial field. In recent it trends to be compact and potable with high grinding and dust collection power, and low noise. As increasing these grinding and dust collection power, the noise and weight of standing grinder occurs an important problem. To solve these problem, an efficient cyclone separator was designed and developed by Ansys-CFX analysis and experiments. A weight of the developed grinder part was 5.9kg, which can be easily handled on standing by workers. and a noise level of the developed prototype was measured 69.9 dB(A).

• Clean Technology
• /
• v.4 no.2
• /
• pp.41-53
• /
• 1998

Most of flame furnace with uncontrolled atmosphere forms oxidation scales in the surface during heat treatment. In this case, shot blasting and pickling are commonly used for reduction of oxidation scales. These processes have many disadvantages, such as long process time, high operating cost and environmental problems due to polishing dust, etc. Hence, this study aimed to develop the advanced heat treating equipment which could make a controlled atmosphere using a heatresisting structure into the flame furnace. The analysis result with SEM, EPMA, and EDX revealed that the amount of scales formed is much less than that with the conventional flame furnace. A brightness of the sample treated with the advanced process is similar compared to the treatment with vacuum furnace. In the present work, it was recommended that the inside structure of the furnace and gas line system could made up of SBB410 and STS310, respectively. The operating cost with the advanced heat treatment system could be reduced annually by forty million won. As a result of this study, it may be possible to reduce the oxidation scales. The fundamental information obtained in this study will be useful not only for improving the heat treatment process(reduction of shot blast and cleaning process), but for promoting the manufacture of bright products.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.2
• /
• pp.260-267
• /
• 2000

Giant cell interstitial pneumonia. a synonym for hard metal pneumoconiosis, is a unique form of pulmonary fibrosis resulting from an exposure to hard metal dust. A case of biopsy-proved giant cell interstitial pneumonia in the absence of appropriate history of exposure to hard metal dust is reported. The patient presented with clinical features of chronic interstitial lung disease or idiopathic pulmonary fibrosis. He worked in a chemical laboratory at a fertilizer plant, where he had been exposed to various chemicals such as benzene and toluene. He denied having any other hobby in his house or job at work, which may have exposed him hard metal dust. High-resolution CT scan revealed multi-lobar distribution of ground glass opacity with peripheral and basal lung predominance. The retrieved fluid of bronchoalveolar lavage contained asbestos fiber and showed neutrotphil predominance. Surgical lung biopsy was performed for a definite diagnosis. Lung specimen showed alveolar infiltration of numerous multinucleated giant cells with mild interstitial fibrosis. Upon detailed examination of the lung tissue, one asbestos body was found. An analysis for mineral contents in lung tissue was performed. Compared with the control specimen, the amount of cobalt and several hard metal components in the lung tissue of this patient was ten times higher. We speculated that the inconsistency between occupational history and the findings of pathologic and mineralogical analyses could be explained by the difference in individual immunologic reactivity to hard metal dust despite the relatively small amount of unrecognized environmental exposure(ED: It's hard to understand what this phrase is trying to say).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.227-234
• /
• 2006

Microstructures of free surface and interior of glass-ceramics obtained by heat treating silicate glass specimen containing electric arc furnace dust(EAF dust) were observed. The crystallization temperature, $T_c$ of glassy specimen was measured around $850^{\circ}C$ from the result of different thermal analysis so heat treatment temperature to obtain glass-ceramic specimen was selected as $950^{\circ}C$ for 1 hr. Glass specimens containing 50 wt% dust were amorphous, while glass specimens containing 70 wt% dust showed spinel crystal peaks in XRD results. In case of glass-ceramic specimens, spinel crystalline phase was appeared with willemite, and willemite crystal peak intensity increased with increasing dust contents. The fractured surface of glass specimens containing 50 wt% dust was smooth like mirror surface, but that containing 70 wt% dust showed spinel crystals of 10 ${\mu}m$ size in glass matrix. In case of glass-ceramic specimens, ZnO crystal particles of $2{\sim}5{\mu}m$ size were produced in free surface and glassy phase, spinel and willemite crystal phases existed in interior. There were no crystals in glasses containing 50 wt% dust, while glass containing 70 wt% dust had 14 vol% crystals. Crystallinity of glass-ceramic specimens containing 50 and 70 wt% dust were 19 and 43%, respectively. When microstructures of glass and glass-ceramic specimens were observed through SEM after TCLP experiment, glass specimens showed flaking phenomenon while glass-ceramic specimens showed a slight corrosion evidence without any cracks.