• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.311-312
• /
• 2006

본 논문에서는 선로 전력조류제약을 고려한 경제급전(SCED : Security-Constrained economic dispatch)에 내점 선형계획법을 이용하여 최적해를 구하는 문제를 다룬다. 최적전력조류(Optimal Power Flow)식으로부터 선로의 유효전력만을 근사화하여 선로 전력조류 제약을 고려할 경제급전(SCED)의 식을 정식화한다. 선형계획법을 적용하여 최적해를 구하기 위해서 발전기출력과 유효전력, 부하, 손실과의 관계를 이용하여 경제급전의 식을 선형화 하는 알고리즘을 제시한다. 선형화 알고리즘은 목적함수로 계통 발전기의 총 연료비를 취하고 전력수급평형식으로 발전기출력증분에 대한 선로의 증분손실계수를 이용하며, 선로의 제약조건은 일반화발전 분배계수(GGDF : Generalized Generation Distribution Factor)를 이용하여 선형화한다. 최적화 기법으로서 내점법(Interior Point Method)을 적용하고자 하며 사례연구를 통하여 선형계획법 중 가장 많이 사용하는 심플렉스(Simplex)법과의 수렴특성을 비교하여 내점 법의 효용성을 확인하고자 한다.

• Electronics and Telecommunications Trends
• /
• v.18 no.5 s.83
• /
• pp.52-62
• /
• 2003

성층권에 무선중계기지를 구축하여 통신에 이용하는 개념은 이미 오래 전부터 제안되어 왔으나 구현상 기술적 난이도가 높아 그 동안 현실화되지 못했다. 그러나 최근 새로운 통신 서비스에 대한 시대적 요구와 고효율의 태양 전지 및 연료 전지, 고정밀 GPS 항법 시스템과 같은 신기술 개발로 인하여 성층권 비행선을 이용한 무선통신 시스템 구현이 점차 가시화 되고 있으며, 세계전파통신회의(WRC)를 계기로 성층권통신시스템용 주파수가 분배됨에 따라, 선진국을 중심으로 HAPS(High Altitude Platform Station) 상용화를 위한 연구개발이 활발히 진행중에 있다. 특히, 우리나라와 인접한 일본은 정부의 적극적인 지원과 산/학/연의 효율적인 공조 체제를 바탕으로 HAPS 개발과 관련하여 과히 세계 선두 진열에 들어서 있다고 해도 과언이 아니다. 아직 HAPS 개발에 필요한 기술적, 재정적 기반이 부족한 우리나라로서는 이웃한 일본의 연구개발 동향을 항시 주시하고 정확하게 분석한다면 향후 독자적인 연구개발 수행 시 많은 도움이 될 것이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.4
• /
• pp.72-79
• /
• 1994

In an automotive spark ignition, it is important to form the proper mixture(air/fuel) on each driving condition for developing the stabilizing combustion and exhaust characteristics. Since most of supply fuel is attached on the inside wall of the intake manifold for unadequate atomization by fuel injection system, it brings a bad effect on combustion and exhaust caused by nonuniformity of fuel distribution to each cylinder and mixture variation. Also it affects engine performance variation and causes noises and vibration. In this study, we verified the effect of the mixture variation which is caused by fuel liquid film in an intake manifold on combustion characteristics and engine performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1706-1713
• /
• 2009

In this paper, a parallel operation algorithm for high power PEMFC generation systems is proposed. According to increasing the capacity of fuel cell systems with several fuel cell stacks, the different dynamic characteristics of each fuel cell stack effect on imbalance of load sharing and current distribution, so that a robust parallel operation algorithm is desired. Therefore, a power-sharing technique is developed and explained in order to design an optimal distributed PEMFC generation system. In addition, an optimal controller design procedure for the proposed parallel operation algorithm is introduced, along with informative simulations and experimental results.

• Transactions of the Korean hydrogen and new energy society
• /
• v.35 no.2
• /
• pp.230-239
• /
• 2024

Efforts are being made to replace ship diesel engines with electric propulsion motors in response to emission regulations. In particular, in the case of short-range small ships, research is being conducted to replace polymer electrolyte membrane fuel cells (PEMFC) with power sources. However, PEMFC has problems such as slow dynamic response characteristics and reduced durability at high temperatures. To solve this problem, a high-precision ship model was developed with power distribution and thermal management strategies applied, and through this, the required power, heat, and power characteristics of the propulsion system according to the ship's speed profile were analyzed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.1
• /
• pp.47-54
• /
• 2022

In this study, we performed numerical analysis for 1 kWe SOFC stack of internal manifold types according to the different manifold sizes to verify the influence of the flow uniformity into each cell. To simulate the flow phenomena in the stack, the continuity and momentum conservation equations including the standard k-𝜺 turbulent model for the steady-state conditions were applied. From the calculation results, we verified that the pressure drop from inlet pipes to outlet pipes decreased to a log scale as the manifold size increased in the internal manifold types. Also, we found that the flow uniformity increased on an exponential scale as the manifold size increased. In addition, the calculation results showed that the flow uniformity gradually improved as the fuel and oxygen utilization increased.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.135-141
• /
• 2005

The procedure of conceptual and detailed design of sub-scale combustor using bipropellant swirl or impinging injector with external or internal mixing for a liquid rocket engine are described in this paper. The sub-scale combustor uses liquid oxygen(LOx) and kerosene as propellants and has a injector head, an ablative material combustor wall and a water cooled nozzle. The injector head has LOx manifold, fuel manifold, fire face plate, one center swirl or impinging injector and 18 main swirl or impinging injectors.

• Journal of the Korean Society of Combustion
• /
• v.19 no.4
• /
• pp.8-13
• /
• 2014

Flow distribution of fuel nozzles for a combustor in a micro gas turbine is numerically investigated. The fuel supply system for the present study has 12 single nozzles with a diameter of several hundred micrometers. A uniform temperature distribution of a combustor outlet should be achieved for maximizing the lives of the turbine blades and nozzle guide vanes. For this, it is very important to uniformly supply fuel to a combustor. In order to investigate flow distributions of fuel nozzles, numerical models for fuel nozzles are made and solved by a commercial code, ANSYS FLUENT. An effect of a fuel nozzle diameter and fuel flow rates on flow distribution of fuel nozzles is numerically investigated. As a result, non-uniformity is increasing as a diameter of a single fuel nozzle increases. Finally, an appropriate diameter of a single fuel nozzle is suggested.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.6
• /
• pp.596-604
• /
• 2010

In order to investigate the operating conditions and major design parameters of a dual ramjet propulsion system, an theoretical analysis of ramjet and scramjet propulsion systems was performed. The performance characteristics of each engine are delivered by thermo-dynamical cycle analysis, considering loss effects in a real engine. The performance sensitivity analysis is conducted by investigating various performance parameters, such as an intake efficiency, combustor inlet Mach number, configuration of the combustor, fuel flow rate, and exhaust nozzle efficiency. Based on these analysis results, the processes of application to dual ramjet cycle engines are specified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.55-63
• /
• 2003

An attitude control system using reaction thrusters for the upper stage of a launch vehicle is considered. The thruster configuration (position and direction) determines control system response, fuel consumption, effective torque and system fault tolerance. We propose a procedure for finding the optimal thruster configuration with desired control effectiveness over the range of selected torque commands. An optimization technique called Particle Swarm Optimization is used for the numerical experiments. The validity of the solution is checked through computer simulations.