• Journal of Energy Engineering
• /
• v.12 no.3
• /
• pp.184-189
• /
• 2003

A study of the property of Indolene-Methanol Plus High Alcolhols (MPHA) has been completed. The study invested the measurement of fuel properties. The fuel properties investigated are distillation characteristics, heating value, flash point, specific gravity and water tolerance. The alcohol concentration was varied from 0 to 100 percent by volume in clear Indolene. The measurement of fuel properties indicated that, in general, Indolene-MPHA blends have higher water tolerance, similar specific gravity, similar flash point and different distillation characteristics compared to Indolene-Methanol blends.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.157-163
• /
• 2010

Solid oxide fuel cells (SOFCs) are commonly composed of ceramic compartments, and it is known that the physical properties of the ceramic materials can be changed according to the operating temperature. Thus, the physical properties of the ceramic materials have to be properly predicted to develop a highly reliable simulation model. In this study, several physical properties that can affect the performance of SOFCs were selected, and simulation models for those physical properties were developed using our own code. The Gibbs free energy for the open circuit voltage, exchange current densities for the activation polarization, and electrical conductivity for the electrolyte were calculated. In addition, the diffusion coefficient-including the binary and Knudsen diffusion mechanisms-was calculated for mass transport analysis at the porous electrode. The physical property and electrochemical reaction models were then simulated simultaneously. The numerical results were compared with the experimental results and previous works studied by Chan et al. for code validation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.123-126
• /
• 2011

A Fuel-rich preburner using kerosene fuel is operated in a non-equilibrium condition and a prediction of burnt-gas properties is not easy from a chemical equilibrium analysis. A premixed counter-flow flame analysis was conducted for the prediction of burnt-gas properties. JP10 was selected for a representative kerosene fuel and a non-equilibrium combustion analysis was accomplished in supercritical condition using UC San Diego reaction mechanism. The premixed counter-flow flame was assumed for stationary and stable flame, and the temperature result in present study was overestimated rather than the experimental results from Huzel. From the difference of the temperature result, other properties, heat capacity, specific heat ratio and molecular weight had some differences against the experimental results. Moreover, the present results was more similar to the experimental results than those of the equilibrium analysis.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.9-14
• /
• 2019

Liquid and solid fuels currently in use have various pros and cons. As a result, researches are dedicated to produce a new form of fuel that utilizes the advantages and overcomes weakness of conventional fuels. In the present study, a new method for making solidified ethanol fuel is introduced, and its preliminary properties and combustion characteristic are observed. The solidified ethanol fuel was made through the production of agarose hydrogel, and its subsequent soaking into pure ethanol. The properties of the solidified ethanol fuel were quantitatively and qualitatively observed, and its validity and applicability discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.56-60
• /
• 2006

It is essential to predict thermodynamic properties of combustion gas with respect to a propellant mixture ratio for the development of a gas generator for a liquid rocket engine. The present study shows the temperature measurement of exit combustion gas as a function of a mixture ratio through the series of combustion tests of a fuel-rich gas generator with liquid oxygen and Jet A-1. The measurements of dynamic and static pressures, and combustion gas temperatures allowed the estimation of thermodynamic properties like a specific heat ratio, a gas constant, and a constant pressure specific heat of the combustion gas. The comparison of the experimental results with predictions made by interpolation parameters obtained from the modification of the chemical equilibrium code indicates that the interpolation method calibrated using the temperature measurements can be utilized as an effective tool for the initial design of a fuel-rich gas generator.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.118-122
• /
• 2006

For the development of a gas generator of a liquid rocket engine, the prediction of thermodynamic properties of combustion gas with respect to a propellant mixture ratio becomes critical. The present study focuses on the temperature measurement of exit combustion gas as a function of a mixture ratio through combustion tests of a fuel-rich gas generator propelled by Lox/Jet A-1. The measurement of combustion dynamic and static pressures allowed indirect estimation of thermodynamic properties like specific heat ratio, gas constant, and constant pressure specific heat. Comparing the results with empirical prediction through an interpolation reveals that the interpolation method calibrated using temperature results can be utilized as an effective tool for the design of a fuel-rich gas generator.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.160-162
• /
• 2017

When rubber elastomer has contact with fuel, since the component and additive having low molecular weight can flow out, the physical properties of both elastomer and fuel could be hindered. In order to predict the life of the rubber elastomer, this study is to determine the change of weight, thickness, hardness, strain, and compression set as mechanical properties of the sealant rubber O-ring, which was dependent on volume, temperature, and storage time of the contacted fuel. We also determined purity of fuel via GC analysis and measured gross heat of combution. The results could be used as a reference to evaluate the life of the rubber elastomer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.379-381
• /
• 2009

The simulation model for metal-supported Solid Oxide Fuel Cell(SOFC) is developed in this study. Open circuit voltage is calculated using Nernst equation and Gibbs free energy is required by thermodynamic. The exchange current densities are compared with experimental results since exchange current density is most effective factor for the activation loss. Liu's study is used for the exchange current density of cathode, BSCF, and Koide's result is applied for the exchange current density of anode, Ni/YSZ. For the ohmic loss, ionic conductivity of YSZ is described from Kilner's mode and the data are compared with Wanzenberg's experimental data. Diffusivity is an important factor for the mass transfer through the porous medium. Both binary diffusion and Knudsen diffusion are considered as the diffusion mechanism. For validation, simulation results at this work are compared with our experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2939-2944
• /
• 2011

The performance and efficiency of a Molten Carbonate Fuel Cell system will improve with the aids of numerical simulations such as finite element analysis. For best simulation results, the virtual model must accurately reflect the actual model including the material properties. It is very difficult, however, to make a detailed numerical model of the stack that consists of hundreds of layers of unit cells composed of various materials like metal, ceramics, polymer, etc. Instead, a practical approach is to find a homogenized material property of the stack as a whole as an approximate replacement. In this paper, the compression ratio of a unit cell is introduced, and a new method is proposed to estimate the homogeneous material properties for both the active and the manifold regions of the stack under the assumption that the compressive deformation occurs only at the separators and matrices in the unit cells. The estimated properties are applied successfully to simulating an actual stack.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.22-29
• /
• 2004

Deformation of the porous media has influence on performance of a proton exchange membrane fuel cell (PEMFC). The stress distributions and deformation of the porous media are major factors for safe and efficient operation in the PEMFC. In this paper, nonlinear contact analysis of air plate and porous media is performed under a working condition to predict the performance characteristics of the air plates. Two kinds of models are suggested for this study. The first porous media model has nonlinear material properties. The second model has nonlinear material properties with contact condition between porous media and air plate. The numerical analysis results of the two models are somewhat different. It is shown that the nonlinear contact analysis is required for the design study of the PEMFC.