• Title/Summary/Keyword: 연료저감장치

Search Result 104, Processing Time 0.022 seconds

Gaseous Fuel Level Measurement of Ultrasonic Wave based on Gauss Algorithm (가우스알고리즘에 의한 초음파의 가스연료레벨 계측)

  • Kim, Hong-Ju;Choi, Doo-Seuk
    • Journal of the Korea Convergence Society
    • /
    • v.9 no.4
    • /
    • pp.161-167
    • /
    • 2018
  • The amount of CNG was measured using a pressure sensor in the case of CNG vehicles. However, the current measurement method causes anxiety to the driver because it is difficult to measure the detailed amount of CNG according to various environmental conditions. This study was performed to measure the amount of CNG in CNG fuel system, and presented the method of measurement by simulating the detection system of CNG. In this experiment, a detection simulator with an ultrasonic sensor in CNG tank of Type-3 was designed, and the reception signal of the ultrasonic sensor was verified by reducing the pressure from 100 bars to 0 bars (increment=5 bars) using compressed air. As a result, the output signal voltage of the ultrasonic sensor decreased as the pressure in the tank decreased, and the it was verified that the shape of the graph was linearity.

A Study on Power Conversion System for Fuel Cell Controlled by Micro-Processor (마이크로프로세서에 의해 제어되는 연료전지용 전력변환장치에 관한 연구)

  • Kim, Ju-Yong;Jung, Sang-Hwa;Mun, Sang-Pil;Ryu, Jae-Yup;Suh, Ki-Young
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.21 no.5
    • /
    • pp.10-24
    • /
    • 2007
  • In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V]. In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch $S_5\;and\;S_6$ in the secondary switch which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household

Experimental Study on Reduction of Particulate Matter and Sulfur Dioxide Using Wet Electrostatic Precipitator (습식전기집진기를 활용한 입자상 물질 및 황산화물 저감 성능에 관한 실험적 연구)

  • Kim, Jong-Lib;Oh, Won-Chul;Lee, Won-Ju;Choi, Jae-Hyuk
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.27 no.6
    • /
    • pp.898-904
    • /
    • 2021
  • This experimental study aims to investigate the use of a wet electrostatic precipitator as a post-treatment device to satisfy the strict emission regulations for sulfur oxides and particulate matter (PM). The inlet/outlet of a wet electrostatic precipitator was installed in a funnel using a marine four-stroke diesel engine (STX-MAN B&W) consuming marine heavy fuel oil (HFO) with a sulfur content of about 2.1%. Measurements were then obtained at the outlet of the wet electrostatic precipitator; an optical measuring instrument (OPA-102), and the weight concentration measurement method (Method 5 Isokinetic Train) were used for the PM measurements and the Fourier transform infrared (FT-IR; DX-4000) approach was used for the sulfur oxide measurements. The experimenst were conducted by varying the engine load from 50%, to 75% and 100%; it was noted that the PM reduction efficiency was a high at about 94 to 98% under all load conditions. Additionally, during the process of lowering the exhaust gas temperature in the quenching zone of the wet electrostatic precipitator, the sulfur dioxide (SO2) values reduced because of the cleaning water, and the reduction rate was confirmed to be 55% to 81% depending on the engine load.

특집:녹색선박 SCR시스템 기술개발 현황 - 녹색선박 SCR시스템 개발

  • Jeong, Gyeong-Yeol;Park, Chang-Dae;Im, Byeong-Ju;Choe, Byeong-Il;Do, Gyu-Hyeong;Kim, Tae-Hun
    • 기계와재료
    • /
    • v.24 no.2
    • /
    • pp.6-17
    • /
    • 2012
  • 최근 산업구조의 고도화에 따라 다양한 산업분야에서 화석연료 등의 에너지소모가 급증하면서 환경문제의 심각성이 대두되고 있다. 그중 질소산화물(NOx)은 산성비와 광화학 스모그의 원인이 되며 눈과 호흡기를 자극하고 식물을 고사시키는 등 주요 대기오염물질로 규제되고 있다. 이와 관련하여 국제해사기구(IMO)에서는 선박대기오염물질의 배출을 규제하는 규정을 만들었으며, 최근에는 배출규제를 강화하는 등 적극적인 규제활동을 벌이고 있다. 따라서 본 논문에서는 선박배기가스 질소산화물의 배출규제 현황과 배출 규제안에 대응하기 위해 본 연구원에서 연구개발 중인 배기가스 오염물질 저감장치의 선택적 촉매 환원(Selective Catalytic Reduction, SCR)시스템에 관하여 간략히 기술한다.

  • PDF

A Study on the characteristics of spray pattern in the Pre filming Airblast Atomizer (공기충돌형 연료분사장치의 분무특성에 관한 실험적 연구)

  • Kim, Hyun-Joong;Han, Jae-Seob;Kim, Yoo;Min, Sung-Gi
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1998.04a
    • /
    • pp.27-27
    • /
    • 1998
  • 연구소기내에서 원활한 연소를 위하여 액체의 균일하고 완전한 미소분열 문제는 매우 중요한 연구분야라 할 수 있으며, 특히 항공기용 가스터빈 연소기에 사용되는 분사 시스템의 설계시에는 단순한 미소분열 문제뿐 아니라 시동성 향상, 화염의 안정화, 공해물질의 저감 등은 물론 압력 차가 작고 유량범위가 넓으며 공기를 이용한 미립화(Atomization)의 효율이 낮은 영역, 즉, 시동(Start-up) 및 플레임 아웃(Flame-out)근처의 영역에서도 효율적인 미립화가 이루어지도록 고려되어져야 한다.

  • PDF

A Study on Combustion Flow Characteristics in A Heavy-Duty Diesel Engine Equipped with EGR (대형디젤기관에서 EGR 적용시 연소유동해석)

  • Baik, Doo-Sung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.7 no.5
    • /
    • pp.784-787
    • /
    • 2006
  • Even if EGR is known as a technology which dramatically reduces NOx emission, its application is a quite complicate since it affects fuel economy and increase of PM emission. Therefore, it is a very important issue to investigate an optimal EGR rate considering all engine parameters. This research was numerically conducted to predict combustion and emission characteristics with respect to various EGR rates.

  • PDF

Modeling and simulation of Hybrid energy system for smart green building (스마트 그린 빌딩을 위한 하이브리드 에너지 시스템 모델링 및 시뮬레이션)

  • An, Boguen;Lee, KyungKyu;choi, Jaeho;Song, Yujin
    • Proceedings of the KIPE Conference
    • /
    • 2014.07a
    • /
    • pp.154-155
    • /
    • 2014
  • 본 논문에서는 디젤발전기와 ESS(Energy Storage System)를 이용한 스마트 그린 빌딩의 하이브리드 에너지 시스템을 제안한다. 빌딩 하이브리드 에너지시스템은 다양한 전력원을 가질 수 있는데 기존의 디젤발전기에 화석연료를 저감할 목적으로 풍력발전시스템이나 태양광발전시스템과 같은 형태의 신재생에너지원들이 연계 운전될 수 있다. 여기서 디젤발전기의 느린 출력응답특성으로 인한 계통 전압 불안정화를 보상하기 위해 응답특성이 빠른 배터리와 슈퍼커패시터로 이루어진 에너지 저장장치와의 연계운전 기술을 제안하고 시뮬레이션 하였다.

  • PDF

미래사회를 지탱하는 파워디바이스 기술의 진전

  • 대한전기협회
    • JOURNAL OF ELECTRICAL WORLD
    • /
    • s.323
    • /
    • pp.69-75
    • /
    • 2003
  • 불투명한 경제정세의 와중에서도 전기에너지를 지탱하는 근간이 되는 파워 일렉트로닉스 분야는 확실히 그 기술개발을 향상시켜 오고 있다. 특히 파워디바이스는, 지구환경과 생활환경을 보다 쾌적하게 하기 위하여 인버터 장치 등의 각종 전력절약기기와 풍력$\cdot$태양광$\cdot$연료전지 등 클린에너지의 전력제어장치에 없어서는 안되는 반도체디바이스로 성장했다. 파워디바이스 중에서도 IGBT(Insulated Gate Bipolar Transistor)의 기술혁신은 요 20년 사이에 비약적인 성과를 거두었다. 1980년대에 제품화된 IGBT는, 반도체메모리의 초미세가공기술을 도입하면서 $5{\mu}m$에서 서브미크론의 디자인툴로 발전하여, 2000년대에 들어 칩의 전류밀도는 약 2배, 포화전압은 약 $65\%$까지 개량되었다. 이와 같은 IGBT의 변천은, 전력손실을 대폭적으로 저감시켜 에너지절약기기의 전력변환효율 향상에 공헌하고 있다. 파워디바이스의 기술진보에서 또 한 가지 잊지 말아야 할 것은 주변회로의 집적화(集積化)에 의한 고성능$\cdot$고기능화이다. 최근의 인버터용 파워디바이스로 가장 많이 사용되고 있는 파워모듈은, IGBT등의 파워칩과 그 주변회로와의 컬래버레이션에 의한 제품이다. 다시 말하면 구동회로, 전류$\cdot$전압$\cdot$온도센서 및 그것들의 보호회로가 IC(집적회로)에 편입되어 고기능$\cdot$소형화를 촉진시키고 있다. 구동회로는 LVIC (저전압집적회로)에서 HVIC(고전압집적회로)로 발전하여 전류$\cdot$온도 등의 각종 센서도 동일 칩에 설계할 수 있게 되었다. 또 센싱이나 보호기능뿐만이 아니라 출력전류의 제어를 위한 연산기능과 di/dt의 제어기능이 내장되도록 되어 있어 보다. 고성능의 인텔리전트 파워모듈(IPM)이라고 불리우는 새로운 개념의 파워디바이스가 실현되었다. 또한 패키지 기술도 내부배선 인덕턴스의 저감과 트랜스퍼 몰드패키지의 개발로, 소형화뿐만이 아니라 파워칩의 성능$\cdot$기능을 충분히 발휘할 수 있도록 개발이 적극적으로 추진되고 있다.

  • PDF

A Study on Combustion Characteristics of the Methane-Hydrogen Lean Mixture by Using Multiple Spark Capacity Discharge in a CVCC (I) (반복점화장치 사용시 정적연소실내 메탄-수소 희박혼합기의 연소특성 연구(I))

  • 김봉석
    • Journal of Energy Engineering
    • /
    • v.12 no.2
    • /
    • pp.124-130
    • /
    • 2003
  • In the present study, the combustion characteristics of methane and hydrogen-supplemented methane as alternative fuels for automotive vehicles were investigated at various hydrogen substitution rate, ignition position and ignition methods in a CVCC. As a result, it is possible to decrease the total burning time and to obtain the reduction of NO concentration by using MSCDI device under the lean mixture conditions without deteriorating combustion characteristics such as combustion efficiency, maximum combustion pressure etc.. And by mixing hydrogen into methane, it was found that the reduction of the total burning time was obtained, in comparison with the use of methane only ; and at the same time, the combustion promotion rate was improved remarkably in comparison with the use of methane only.

Simulation for the Fuel Economy and the Emission of Diesel Hybrid Electric Vehicle (디젤 하이브리드 전기 자동차의 연료경제성 및 배출가스에 관한 시뮬레이션)

  • Han, Sung-Bin;Chang, Yong-Hoon;Suh, Buhm-Joo;Chung, Yon-Jong
    • Journal of Energy Engineering
    • /
    • v.18 no.1
    • /
    • pp.31-36
    • /
    • 2009
  • There are several types of environment friendly vehicle being developed by auto manufactures. HEV (Hybrid Electric Vehicle) is most applicable one among them in actuality. HEV has two power sources, one is an internal combustion engine, the other one is an electric device. The HEV is developed for reducing fuel consumption and emissions. We selected the diesel engine as a main power source of HEV. The tests were carried out under different driving cycles which was CBDBUS (Central Business Driving Bus Schedule) and HWFET (Highway Fuel Economy Test). This research presents a simulation for the fuel economy and the emission of heavy diesel hybrid vehicle according to the SHEV (Serial Hybrid Electric Vehicle), PHEV (Parallel Hybrid Electric Vehicle), Plug-in SHEV and plug-in PHEV.